Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 17 of 17 for “"dynamic precipitation"”.

  1. Dynamic Precipitation of Second Phase Under Deformed Condition in Mg-nd Based Alloy

    … Among the several flavors of of Mg-alloys, precipitation hardenable Mg-rare earth (RE) based alloys have shown good potential due to their favorable creep resistance within a wide window of operating temperatures ranging from 150°C to 300°C. A key aspect of Mg-RE alloys is the presence of …

    unt Repository record for Dynamic Precipitation of Second Phase Under Deformed Condition in Mg-nd Based Alloy (opens in a new tab)

  2. MODELING OF THE DYNAMIC TRANSFORMATION ABOVE THE AE3 TEMPERATURE

    The dynamic precipitation of ferrite during austenite deformation above the Ae3 temperature, was first reported by Yada et al. in the 1980s. These observations were later confirmed for a wide range of steel compositions and processing conditions. The aim of this work is to clarify the mechanism by …

    mcmaster Repository record for MODELING OF THE DYNAMIC TRANSFORMATION ABOVE THE AE3 TEMPERATURE (opens in a new tab)

  3. Comportamento mecânico e tenacidade à fratura de ligas de alumínio 2024 e 7075 submetidas a diferentes tempos de envelhecimento

    … ratio due local compressive stress associated to dynamic precipitation. In this context, its valued the relationship between fracture toughness, mechanical properties and heat treatment in two aluminum alloys (2024-T351 e 7075-T651) when submitted to solubilization (480 ∘C for 2,5h) and artificial …

    brazil-ufrn Repository record for Comportamento mecânico e tenacidade à fratura de ligas de alumínio 2024 e 7075 submetidas a diferentes tempos de envelhecimento (opens in a new tab)

  4. Exploring Rapid Solidification and Equal Channel Angular Pressing in the Fabrication of Mg-Based Alloys for Medical Applications

    … Additionally, ECAP processing caused the dynamic precipitation of nano-size Ca­2Mg6Zn3 precipitates which contributed to an increase in strength from the RS consolidated state after ECAP was performed. Corrosion testing also determined that ECAP caused an increase in corrosion rate of …

    mtu Repository record for Exploring Rapid Solidification and Equal Channel Angular Pressing in the Fabrication of Mg-Based Alloys for Medical Applications (opens in a new tab)

  5. Fenômeno de fratura intergranular assistida por oxidação em superligas de níquel 718

    … involved nor their dependency on thermodynamic variables or loading conditions. Because of this, we have characterized OAIC by hot tensile testing at different strain rates and scanning and transmission electron microscopies, with the alloy in the solutionized condition. In this study, …

    brazil-uerj Repository record for Fenômeno de fratura intergranular assistida por oxidação em superligas de níquel 718 (opens in a new tab)

  6. Avaliação de complexos polieletrolíticos à base de poli(epicloridrina-co-dimetilamina) e poli(ácido 4-estirenosulfônico-co-ácido maleico) na veiculação de polifosfatos para o controle de incrustações em poços de petróleo

    … CaCO3 formation was evaluated by static tests, dynamic precipitation in capillary and scanning electron microscopy (SEM) images. At pH 6.5, excellent results were found with complete inhibition of CaCO3 deposition in the capillary with only 2.5 mg L-1 of SHMP and a deformed structure of the …

    brazil-ufrn Repository record for Avaliação de complexos polieletrolíticos à base de poli(epicloridrina-co-dimetilamina) e poli(ácido 4-estirenosulfônico-co-ácido maleico) na veiculação de polifosfatos para o controle de incrustações em poços de petróleo (opens in a new tab)

  7. Economic Pasture-Based Cow-Calf Systems for Appalachia

    … of month, stockpiling, hay feeding, temperature, precipitation, and durations of paddock grazing and rest on forage mass and quality measurements were investigated. The system was complex and dynamic; precipitation and rest days in particular showed clear interactions with both month and …

    vt Repository record for Economic Pasture-Based Cow-Calf Systems for Appalachia (opens in a new tab)

  8. Stress-induced Damage and Post-fire Response of Aluminum Alloys

    … damage primarily manifests itself as dynamic recovery at low creep temperatures, while cavitation, dynamic recrystallization and dynamic precipitation (in Al6061) are the types of damage developed in the high creep strains at high exposure temperatures. Different creep mechanisms are …

    vt Repository record for Stress-induced Damage and Post-fire Response of Aluminum Alloys (opens in a new tab)

  9. Evolution of Precipitates and Their Influence on the Mechanical Properties of β-Titanium Alloys

    … to the shearing of the ω precipitates and the dynamic precipitation of the α phase within these channels. The formation of the stable α phase in the commercial β-21S alloy due to the influence of precursor phases, like the metastable ω phase, is investigated. It is evident from the …

    unt Repository record for Evolution of Precipitates and Their Influence on the Mechanical Properties of β-Titanium Alloys (opens in a new tab)

  10. High Temperature Scandium Containing Aluminum Alloys Subjected to Equal Channel Angular Pressing

    Precipitation hardenable aluminum alloys are well-known for their high strengthto-weight ratio, good thermal stability, electrical conductivity, and low cost. Al-Sc alloys micro-alloyed with rare earth and transition metal elements can be strengthened for ambient and high temperature applications. …

    tamu Repository record for High Temperature Scandium Containing Aluminum Alloys Subjected to Equal Channel Angular Pressing (opens in a new tab)

  11. Elevated temperature mechanical properties of line pipe steels

    … deformation such as precipitate coarsening, dynamic precipitation, tempering of martensite in martensite-austenite islands, or transformation of retained austenite could account for differences in tensile property functionality between the X52 and X70 steels. Long term aging under load (LTA) …

    colo-mines Repository record for Elevated temperature mechanical properties of line pipe steels (opens in a new tab)

  12. Reservoir characterization of the Middle Bakken member, Fort Berthold region, North Dakota, Williston Basin

    … diagenesis, which is not facies preferential. A dynamic precipitation-dissolution process helped preserve porosity and permeability within the MBM. The primary pore network is comprised of secondary slot pores (dissolution pores). These pores show decent permeability (qualitatively), however …

    colo-mines Repository record for Reservoir characterization of the Middle Bakken member, Fort Berthold region, North Dakota, Williston Basin (opens in a new tab)

  13. Effects of microstructure evolution on deformation and damage mechanisms during creep-fatigue testing of Alloy 709, The

    … 709, a 20Cr-25Ni-1.5Mo-Nb-N solid solution and precipitation strengthened austenitic stainless steel, is a candidate material for structural components in Gen IV sodium cooled fast spectrum reactors (FSRs) due to its improved creep resistance over current qualified structural alloys. However, …

    colo-mines Repository record for Effects of microstructure evolution on deformation and damage mechanisms during creep-fatigue testing of Alloy 709, The (opens in a new tab)

  14. Enhancing the Strength and Formability of Magnesium Alloys for Lightweight Structural Applications

    … most active deformation mechanism. In addition, dynamic recrystallization (DRX) was found to be most active under basal and prismatic slip at elevated temperatures and positively enhanced ductility. In contrast, tension twinning suppressed DRX and was correlated with comparatively poor ductility. …

    tamu Repository record for Enhancing the Strength and Formability of Magnesium Alloys for Lightweight Structural Applications (opens in a new tab)

  15. Multiscale Characterisation of Creep Deformation in Copper Chromium-Zirconium Alloy; a Candidate Heat Sink Material in Nuclear Fusion Devices.

    … the deformation behaviour of the candidate precipitation hardened copper-chromium-zirconium alloy (CuCrZr). The research includes the establishment of basic material properties like the Young’s modulus, yield and the ultimate tensile strength of the material at 300 °C. To establish the creep …

    the-open-u Download PDF for Multiscale Characterisation of Creep Deformation in Copper Chromium-Zirconium Alloy; a Candidate Heat Sink Material in Nuclear Fusion Devices. (opens in a new tab)

  16. Selective laser melting and post-processing for lightweight metallic optical components

    … refinement up to a specific depth, due to the dynamic precipitation of nanoscale Si particles. Surface hardening and high compressive residual stresses were generated due to severe plastic deformation. Friction stir processing (FSP) was studied as a localized treatment on a large surface area …

    mcmaster Repository record for Selective laser melting and post-processing for lightweight metallic optical components (opens in a new tab)

  17. Role of Microstructural Factors on the Corrosion Behavior of Mg-9Al-1Zn Alloys Under Different Processing Conditions

    Magnesium and its alloys exhibit low density and high specific strength making them excellent candidates for a variety of applications in automotive, aerospace, biomedical and electronics fields. Despite these potential applications of magnesium alloys, there are still some major challenges that …

    tamu Repository record for Role of Microstructural Factors on the Corrosion Behavior of Mg-9Al-1Zn Alloys Under Different Processing Conditions (opens in a new tab)