Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 122 for “"e-beam lithography"”.

  1. Polynomial time optimal algorithm for stencil row planning in e-beam lithography

    Electron beam lithography (EBL) is a very promising candidate for integrated circuit (IC) fabrication beyond the 10 nm technology node. To address its throughput issue, the Character Projection (CP) technique has been proposed, and its stencil planning can be optimized with awareness of overlapping …

    uiuc Repository record for Polynomial time optimal algorithm for stencil row planning in e-beam lithography (opens in a new tab)

  2. E-beam Lithography using Dry Powder HSQ Resist Having Long Shelf Life and Nanogap Electrode Fabrication

    … of nanofabrication developing, high-resolution e-beam lithography (EBL) becomes more and more important. In this thesis, it is discussed that the effective factors behind the resolution of EBL and how it works, trying to understand the capabilities and limits of different EBL resists and process …

    waterloo Repository record for E-beam Lithography using Dry Powder HSQ Resist Having Long Shelf Life and Nanogap Electrode Fabrication (opens in a new tab)

  3. Morphology Control and Ordering of PS-b-PMMA Block Copolymer by The Use of Neutral Monolayer and E-beam Lithography

    … for the BCP of PS-b-PMMA. Further, electron beam lithography was used to modify the properties of the PS-b-PMMA block copolymer in order to obtain different morphologies within the same BCP thin film.

    waterloo Repository record for Morphology Control and Ordering of PS-b-PMMA Block Copolymer by The Use of Neutral Monolayer and E-beam Lithography (opens in a new tab)

  4. Fabrication of high aspect ratio (HAR) atomic force microscopy (AFM) probes by one step e-beam lithography and AFM cantilever patterning using grafted monolayer brushes

    … for expensive instruments such as focused ion beam causing low throughput and high cost. In this thesis, several processes are developed for the batch fabrication of HAR AFM tips to reduce the cost and increase the throughput where HAR tips with tip apex diameter down to 9 nm without oxidation …

    waterloo Repository record for Fabrication of high aspect ratio (HAR) atomic force microscopy (AFM) probes by one step e-beam lithography and AFM cantilever patterning using grafted monolayer brushes (opens in a new tab)

  5. Calibration and Optimization of Near-Field Scanning Microwave Microscope

    … niobium films were fabricated, first with e- beam lithography and then with photolithography. Atomic Force Microscope (AFM) characterization showed that our fabrication method of flat gold allows to get RMS roughness of less than 1nm, essential factor to eliminate topography effect from …

    chalmers Repository record for Calibration and Optimization of Near-Field Scanning Microwave Microscope (opens in a new tab)

  6. Development of Nano-Pattern Recognition and Correlation Technique for Deformation Measurement of Nano-Scale Structures

    … nano-scale deformations. They include electron-beam moiré (EBM), nano-scale moiré interferometry, SEM/TEM/AFM digital image correlation (DIC), and speckle interferometry with electron microscopy (SIEM). None of the existing techniques provide both the accuracy/sensitivity (sub-nanometer) and …

    maryland Repository record for Development of Nano-Pattern Recognition and Correlation Technique for Deformation Measurement of Nano-Scale Structures (opens in a new tab)

  7. Magnetoresistance in constrained domain walls

    … Ni nanobridge was fabricated by either e-beam lithography or a combination of e-beam lithography and helium ion milling. The two sides of the device are both single magnetic domains showing independent magnetic switching. The connection between the sides constrains the domain wall when the …

    soton Download PDF for Magnetoresistance in constrained domain walls (opens in a new tab)

  8. Nanofabrication of Optofluidic Photonic Crystal Resonators for Biosensing

    … channel is described. The recipes for e-beam lithography of PhC and PhC nanocavity patterns were optimized by carefully tuning the e-beam dose as well as control of the resist baking and development conditions. Two PhC fabrication processes based on pattern transfers by lift-off and …

    wvu Repository record for Nanofabrication of Optofluidic Photonic Crystal Resonators for Biosensing (opens in a new tab)

  9. Fabrication and modelling of SOI and GaAs MSM photodetectors and a GaAs-based integrated photoreceiver

    … the fabrication technology using electron beam (e-beam) lithography, and to achieve higher bandwidths for the detector, the transistor, as well as the photoreceiver, with submicron devices. First, MSM detectors on different materials, i.e. silicon-on-insulator (SOI) and semi-insulating …

    aalto Repository record for Fabrication and modelling of SOI and GaAs MSM photodetectors and a GaAs-based integrated photoreceiver (opens in a new tab)

  10. SPECTROSCOPIC ENHANCEMENT FROM NOBLE METALLIC NANOPARTICLES

    … were fabricated by two different methods: e-beam lithography (top down) and spray pyrolysis (bottom up). Using e-beam lithography, we produced arrays of nanostructures with well defined shapes, sizes, and spacings. By systematically varying these topographical parameters, we measured their …

    maryland Repository record for SPECTROSCOPIC ENHANCEMENT FROM NOBLE METALLIC NANOPARTICLES (opens in a new tab)

  11. CHARACTERIZATION OF MAGNETIC NANOSTRUCTURES CREATED BY STEPWISE NANOSPHERE LITHOGRAPHY

    … The current nanofabrication techniques such as e-beam lithography technique, nanoimprint and EVU lithography are greatly restricted by process related limitations including the stringent alignment requirement at nanoscales, complex fabrication procedures, high-cost and long operation time. This …

    nus Repository record for CHARACTERIZATION OF MAGNETIC NANOSTRUCTURES CREATED BY STEPWISE NANOSPHERE LITHOGRAPHY (opens in a new tab) Download file for CHARACTERIZATION OF MAGNETIC NANOSTRUCTURES CREATED BY STEPWISE NANOSPHERE LITHOGRAPHY (opens in a new tab)

  12. Πειραματική και θεωρητική μελέτη τρανζίστορ, βασισμένων σε νανονήματα ημιαγωγών, υπό μαγνητικά επαγόμενη μηχανική παραμόρφωση

    … a resist template patterned by electron beam (e-beam) lithography. At the same time, the development of magnetostrictive FeCoSiB thin-films was performed via DC sputtering. Magnetostatic characterization of the resulted thin-films in respect to the film composition was performed in order …

    greece Repository record for Πειραματική και θεωρητική μελέτη τρανζίστορ, βασισμένων σε νανονήματα ημιαγωγών, υπό μαγνητικά επαγόμενη μηχανική παραμόρφωση (opens in a new tab)

  13. Laser microprocessing and fabrication of structures on glass substrates

    … processing techniques, such as photolithography and e-beam lithography, are costly tools to own and operate. Therefore, the goal of this thesis is to investigate alternative methods to achieve micro-/nano-processing of glass by the use of advanced lasers technologies. The methods are …

    nus Repository record for Laser microprocessing and fabrication of structures on glass substrates (opens in a new tab) Download file for Laser microprocessing and fabrication of structures on glass substrates (opens in a new tab)

  14. Magnetic properties of hybrid nanostructures

    … nanostructures. Techniques such as nanocluster beam deposition, e-beam lithography and hydrothermal growth were used to fabricate the geometrically confined objects, which include three-dimensional (3D) magnetic gradient nanomaterial, 2D thin films (antiferromagnetically coupled bilayer …

    nus Repository record for Magnetic properties of hybrid nanostructures (opens in a new tab) Download file for Magnetic properties of hybrid nanostructures (opens in a new tab)

  15. A superconducting investigation of nanoscale mechanics in niobium quantum point contacts

    … for producing atomic level structures (e-beam lithography, self-assembled monolayers, etc.); coupling these techniques with the ability to accurately manipulate atomic systems (such as with Scanning Tunneling Microscopes (STM), Atomic Force Microscopes (AFM), or Mechanically Controllable …

    gatech Repository record for A superconducting investigation of nanoscale mechanics in niobium quantum point contacts (opens in a new tab)

  16. Three dimensional conductivity modulation in biocompatibly functionalized nano-engineered structures

    … streptavidin. For this purpose, direct write e-beam lithography technique is used to print a dot array on 950k PMMA C7 resist and the nickel dots obtained after lift-off are used as an etch mask to etch into silicon to realize the nanopillar array. A number of experiments are conducted to …

    ttu Repository record for Three dimensional conductivity modulation in biocompatibly functionalized nano-engineered structures (opens in a new tab)

  17. Novel few-layer black phosphorus nanostructure fabrication methods and DFT simulations

    … of 2-dimensional black phosphorus by a top-down lithography and etching approach. The wet etching process can etch selected regions of few-layer black phosphorous with an atomic layer accuracy. This etch method is deep-UV and e-beam lithography process compatible, and is free of oxygen and other …

    ubc Repository record for Novel few-layer black phosphorus nanostructure fabrication methods and DFT simulations (opens in a new tab) Download PDF for Novel few-layer black phosphorus nanostructure fabrication methods and DFT simulations (opens in a new tab)

  18. Electrical and optical properties of carbon nanotube intra-connects and conductive polymers

    … with sharp end on a silicon wafer using e-beam lithography. The intra-connects were then grown by use of chemical vapor deposition (CVD) technique. The intra-connects were later electroplated by various conductive polymers. The morphology, electrical conductivity of these intra-connects as …

    njit Repository record for Electrical and optical properties of carbon nanotube intra-connects and conductive polymers (opens in a new tab)

Page 1 of 7