Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 30 for “"edge surface"”.
-
Evaluation of the Effects of Residual Surface Compression on the Strength of Structural Glass Bolted Connections
… plates used in glazing applications, residual surface compressive stresses are often induced into the plates through heat-treatment. In designing these connections, engineers have often assumed that the ultimate strength of a glass plate equals the strength of the pre-heat-treated plate …
-
Model of Surface Waves on a Viscoelastic Material in a Cylindrical Container with Edge Constraints
… resonant frequencies and mode shapes of pinned edge surface waves on a viscoelastic fluid contained in a finite depth cylindrical container. A boundary integral approach is used to map the governing equations to the domain boundary. The surface waves obey an eigenvalue operator equation that …
-
Tracing Redox Cycles during Microbe-Clay Interactions Using Stable Iron Isotopes
… driven by microbial activity in the shallow subsurface. A wide range of bacteria, archaea, and fungi reduce Fe(III) to acquire energy with soil organic compounds as the electron donors. Iron isotope signatures in ancient rocks (3.1-2.4 Ga) associated with dissimilatory Fe reduction (DIR) have …
-
SINGAPORE AND THE RIVERINE LANDSCAPE: TRANSFORMATION IN URBAN WATER'S EDGE
… services by transforming the urban water's edge. It explores the four main strategies of riverine landscape design: edge, surface, mass and section, citing Bishan Ang Mo Kio Park and Lorong Halus Wetland as the main case studies to prove its feasibility, achievements and deficiencies as an …
-
Surface and Image In Painting
… me to develop a kind of dualism between surface as object and as illusion. I treated the surface as a low-relief sculpture and colored it with stains of diluted acrylic. Illusionistic "shadows" were used to exaggerate the three-dimensionality of the sculptural forms. Further experiments …
-
Gas Turbine Blade Leading Edge Profile Effect on Film Cooling Effectiveness Using PSP Technique
… effectiveness of gas turbine blade leading edge region was carried out. The parameters studied include leading edge shape, effect of gill holes, internal impingement, coolant to main stream density ratio & blowing ratio. Three leading edges which include a cylindrical leading edge of radius …
-
An Improved MUSIC Model for Gibbsite
… that have proposed MUSIC models for gibbsite surfaces have purported to achieve a very good fit with potentiometric titration data. However, in order to achieve such results, several significant parameters, such as the number of surface sites, site densities, and pKa values were sometimes …
-
Magneto-infrared spectroscopy of emerging topological materials
… attracted much attentions due to their robust edge/surface states against disorders and external disturbance under the protection of symmetries. Such robust states hold great promise for application in spintronics and quantum computing. Therefore, intense explorations and characterizations of …
-
The Interaction of Isotropic Turbulent Structures with an Airfoil's Leading-Edge
… turbulent structures near the airfoil’s leading-edge is needed. This thesis addresses this research gap by investigating an isotropic turbulent inflow interacting with the leading-edge of a symmetric NACA 0012 airfoil, employing both numerical simulations and experimental approaches. A numerical …
-
Determination of Surface Free Energies and Aspect Ratio of Talc
… angle measurements were conducted to assess the surface chemistry of the mineral talc. The contact angles were performed on both flat and powdered samples and the results were used to determine the surface free energy components and parameters (SFEC) using the acid-base theory for solids, …
-
Assessing the Reactive Surface Area of Phlogopite during Acid Dissolution: An Atomic Force Microscopy, X-ray Photoelectron Spectroscopy, and Low Energy Electron Diffraction Study
The behavior during dissolution of edge and basal surfaces of the mica phlogopite were examined using in situ atomic force microscopy (AFM), x-ray photoelectron spectroscopy (XPS) and low-energy electron diffraction (LEED) in an attempt to characterize the reactive surface area during dissolution. …
-
The influence of sheet conditions on the formability of titanium alloys at room temperature
… structure and their high susceptibility to surface inhomogeneity. The main gaps in knowledge identified were the non-availability of data and research on the impact of machining induced edge conditions on the room temperature forming tendencies of titanium alloys. In addition, the …
-
Surface Free Energy Characterization of Powders
… angle measurements were conducted to study the surface chemistry of powdered minerals. The contact angle measurements were conducted on both flat and powdered talc samples, and the results were used to determine the surface free energy components using Van Oss-Chaudhury-Good (OCG) equation. It …
-
Using advanced correlative microscopy techniques to investigate the behaviour of Zirconium alloys
… microscopy. Through the combined use of cutting-edge surface analysis techniques, these methodologies have been documented in the following work:<br/><br/>1. The use of high-speed data acquisition in the Bristol NanoDynamics Ltd. HS-AFM to image Iodine Stress Corrosion Cracking (I-SCC), with the …
-
Topological k · p Hamiltonians and their applications to uniaxially strained Mercury telluride
… that has fundamentally challenged our knowledge of insulator and metals. They are insulators in the bulk, but metallic on the edge. A TI is characterized by a so-called topological invariant. This characteristic integer number is associated to every mapping between two topological spaces and …
-
Atomic Force Microscopy Study of Clay Mineral Dissolution
… dissolution rates normalized to their reactive surface area, which corresponds to the area of their edge surfaces (A<sub>e</sub>). The A<sub>e</sub>-normalized rates for these minerals between pH 1-2 are all ~10E<sup>-8</sup> mol/m<sup>2</sup>*s, and compare very well to other …
-
Electronic Transport in Dirac Materials:Graphene and a Topological Insulator(Bi<sub>2</sub>Se<sub>3</sub>)
… materials that have a bulk band gap and gapless edge/surface states. The surface state in 3D topological insulators has a Dirac electronic spectrum like graphene, but is singly spin-degenerate, with spin-momentum locking. This thesis will describe electronic transport experiments in graphene and …
-
Dispersion degrees of freedom in metamaterials and metasurfaces
… in matter. Engineered (meta)materials and metasurfaces have enabled, over the past two decade, a new level of flexibility to realize of a broad range of anomalous optical properties. Most of my work on novel dispersion degrees of freedom has indeed focused on metamaterial platforms, as they …
-
Molecular modelling applications in crystallization fouling and clay/polymer nanocomposites
… The type of bond between nylon 6 and basal surface of the clay was found to be basically electrostatic interactions, and particularly hydrogen bonds. Whilst, the type of interactions between nylon 6 and clay edge surface was found to include covalent bonds as well as electrostatic …
-
All-atom and Coarse-grained Molecular Dynamics Modeling of Various Polymeric and Composite Materials
… aggregation. Experiments show that coating the surface of reduced graphene oxide (rGO) nanoparticles with PEI chains can improve their dispersion in a PEI matrix and thus lead to stronger composites. Simulations reveal that the PEI chains grafted to the edge surface a rGO particle form a …
Page 1 of 2