Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 64 for “"ejectors"”.
-
Compressible Flow Analysis of Thrust Augmenting Ejectors
… the thrust augmenting characteristics of jet ejectors. The mixing process in ejectors can be analyzed using either the control volume approach, or detailed models based on the Navier -Stokes Equations and the theory of turbulent jets. The control volume approach uses integrated forms of the …
-
CFD optimization study of high-efficiency jet ejectors
… the optimization study of the constant-area jet ejectors, all parameters were expressed in dimensionless terms. The objective of the study was to investigate the optimal length, throat diameter, and optimal nozzle diameter at any operating conditions. Also, the optimum compression ratio and …
-
Experimental characterization of mixing chamber stall in vacuum ejectors
Vacuum ejectors are devices commonly used in industries such as mining to collect and transport process wastes such as sludge. Ejectors operate using a high-pressure primary fluid accelerated through a nozzle to entrain and mix with the secondary fluid which is discharged, creating a region of low …
-
Coupled electrical and acoustic modeling of viscous fluid ejectors
… for each component of the considered fluid ejectors: piezoelectric transducers, acoustic pipes, and acoustic horns. The acoustic pipe models consider the two limited cases when either the acoustic boundary layer or attenuation losses dominate the acoustic field and are adapted to account for …
-
Entrainment ratio and entropy generation of vacuum-objective supersonic ejectors
Supersonic air ejectors are mechanical devices in which a supersonic primary air stream entrains a secondary air stream by creating suction. Because of their ability to use low-grade energy for their operation and the absence of moving parts, these ejectors are used in various sectors such as …
-
Performance of Air-Air Ejectors with Multi-ring Entraining Diffusers
… research study considered subsonic short air-air ejectors with multi-ring entraining diffusers. Many references can be found for the design of air-air ejectors with solid diffusers. However, a limited amount of work has been published specially addressing the performance of short ejectors with …
-
Experimental investigation of thrust augmenting ejectors using vane excited primary jets
An experimental investigation has been conducted to evaluate the entrainment characteristics of a thrust augmenting ejector, with a small, oscillating airfoil inserted in the potential core of the primary jet. Velocity distributions were measured across the width of the jet, at downstream distances …
-
One-dimensional treatments of the flows in high pressure gas ejectors
… methods of describing the flows in constant area ejectors in terms of one-dimensional theories are examined and discussed. Both sonic and supersonic injection are considered, but the analysis is limited to the mixing of two streams of the same perfect gas. Three simple one-dimensional theories …
-
Head augmentation in hydraulic turbines by means of draft tube ejectors
… turbines which utilize excess flow in draft tube ejectors to increase the effective head across the turbine. The resulting reduction in system cost was found to exceed the corresponding reduction in capacity. The use of draft tube ejectors was found to require slightly lower turbine settings due …
-
A Study of Subsonic Air-Air Ejectors with Short Bent Mixing Tubes
… and numerical study of air-air bent exhaust ejectors was carried out. The objective of the study was to determine the effect of a bend on the performance of exhaust ejectors. The ejectors consisted of nozzles, mixing tubes and in some cases entraining diffusers. As part of this study the …
-
CFD SIMULATION AND SHAPE OPTIMIZATION OF SUPERSONIC EJECTORS FOR REFRIGERATION AND DESALINATION APPLICATIONS
… data. Simulations for three different supersonic ejectors (ejectors for refrigeration and desalination application with different working fluids namely the steam or compressed air) are conducted to further validate the numerical solution accuracy. The turbulence model producing more accurate …
-
Experimental and Computational Analysis of Evaporative Spray Cooling for Gas Turbine Exhaust Ejectors
This research studied the effects of evaporative spray cooling on air-air ejector performance. Experimental data was collected for the purpose of validating computational simulations. This was done by modifying an existing air-air ejector to accommodate four spray flow nozzles which were used to …
-
Optimal dimensionless design and analysis of jet ejectors as compressors and thrust augmenters
… of watercraft or aircraft. Optimization of jet ejectors as compressors and thrust augmenters was conducted using the software GAMBIT (Computer Aided Engineering (CAE) tool for geometry and mesh generation) and FLUENT (Computational Fluid Dynamics (CFD) solver kit). Scripting languages PYTHON and …
-
Numerical Examination of Flow Field Characteristics and Fabri Choking of 2D Supersonic Ejectors
An automated computer simulation of the two-dimensional planar Cal Poly Supersonic Ejector test rig is developed. The purpose of the simulation is to identify the operating conditions which produce the saturated, Fabri choke and Fabri block aerodynamic flow patterns. The effect of primary to …
-
The effect of geometric parameters on the performance of second throat annular steam ejectors
<p>Steam ejectors are simple pumps that, among many possible applications, are used in altitude-simulation rocket motor testing. Of the two main types of ejectors, annular and centerbody, the latter has been the subject of most previous research. Less is known about the operation of annular …
-
Numerical Investigation of Mixing Tabs in Multi-Ring Entraining Diffuser in Air-Air Ejectors
… entraining diffusers in subsonic short air-air ejectors. Although numerous studies exist on mixing tabs in nozzles, none was found that placed tabs in an entraining diffuser system used with an ejector. Given that mixing tabs led to improvements at the nozzle, they were analyzed in entraining …
-
Numerical modeling of supersonic ejectors for combining high- and low-pressure steam for geothermal applications
… supersonic single-phase laboratory-scale steam ejectors and a supersonic two-phase industrial-scale steam ejector using ANSYS Fluent. The results were compared to an analytical model and experimental results from laboratory-scale and industrial-scale ejectors. The single-phase laboratory-scale …
-
Effect of Nozzle Exit Position on the Performance of Geothermal Ejectors Using a Parametric CFD Model
This study investigates the performance of a geothermal ejector using a computational fluid dynamics (CFD) model with wet steam formulation, focusing on the effect of nozzle exit position (NXP) on fluid entrainment. A parametric geometry and meshing approach was developed, allowing the NXP to be …
-
Testing and modeling of a two-phase ejector
… performed as well as typical single-phase ejectors, an improvement of 12% could be achieved. Previous tests have demonstrated a smaller 3.7% improvement; the difference is in the poor performance of the two-phase ejector. The purpose of this research is to understand the operating …
Page 1 of 4