Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 258 for “"electric arc"”.
-
Scheduling an electric arc furnace steel shop
Includes bibliographical references.
-
Carbon Injection into Electric Arc Furnace Slags
<p>Recent experiment in our laboratory demonstrates that an increase in slag foamingwith carbon injection rate is limited by slag volume. The current work has identified arelationship between foam height, carbon injection rate and slag volumes, whichpredicts the critical injection rate above which …
-
Water Detection Framework for Industrial Electric Arc Furnaces
… a framework for water detection in an industrial electric arc furnace. The objective of the framework is to prevent water leak furnace explosions. This framework consists of a hybrid algorithm and a fault detection method. The hybrid algorithm consists of a mechanistic model and an empirical …
-
Pyrohydrolytic de-halogenation of electric arc furnace dusts
Includes bibliographical references (pages 200-204).
-
A Study of Electric Arc Welding and Acetylene Welding
<p>This study was made for the purpose of determining which method of welding made the strongest weld and with the hope that something may be brought to light which would make possible a weld which could be guaranteed to be as strong as the metal.</p>
-
Fluctuations of an electric arc in a plasma generator
… after being partially ionized by a high-energy electric arc. The frequency of arc voltage oscillation was found to be inversely proportional to the power input to the arc. This was probably due to the motion of the arc with the vortex flow in the arc chamber. When a parallel resonant circuit was …
-
Heuristic method for scheduling electric-arc steel furnaces, A
Bibliography: page 42.
-
Electric Arc Welding of Gray Cast Iron Without Preheating
Cast irons are iron-carbon alloys with greater than 1.7% carbon. Although white, malleable and ductile cast irons are used extensively for casting work, this study is concerned with only the gray cast irons.
-
Air quality at an electric-arc steel manufacturing plant
… air sampling program was conducted at an electric-arc secondary steel manufacturing facility using the HI-VOLUME Sampler reference method for suspended particulates. A wind recording device was installed at the facility to provide a continuous record of wind data for correlation with the …
-
Phosphorus Removal From Stormwater Using Electric Arc Furnace Steel Slag
The use of electric arc furnace steel slag (EAF) as a viable add-on technology to existing stormwater systems for the removal of dissolved phosphorus was investigated. Existing popular stormwater treatment measures such as grassed swales, detention ponds and constructed wetlands, while effective in …
-
Utilization of electric arc furnace slag in sustainable hydraulic binders
… of natural resources have developed a search for more sustainable practices, which allow preserving natural resources and, at the same time, the reuse of existing industrial wastes and by-products. Therefore, this research work focused on the development of more sustainable binders, …
-
Erosion of the Cathode by the Electric Arc in Vacuum
Vacuum arc devices such as switches, high power vacuum interrupters and vacuum gaps are finding wide application in the control and distribution of electric power. It has been the writer's privilege to participate in the development of these devices over the past several years. These devices …
-
Reduction of oxides with carbon in the electric-arc furnace
Includes bibliographical references (page 38).
-
Characterization of thermo-chemical properties of electric arc plasma actuators
Made available in DSpace on 2012-05-22T00:32:49Z (GMT). No. of bitstreams: 3 Sanders_Bradley.pdf: 3950226 bytes, checksum: 6d13168dd33011bda773e827fa05155e (MD5) Sanders_Bradley.docx: 27837244 bytes, checksum: bca4e05988b21491e4ef301725bb4666 (MD5) license.txt: 4065 bytes, checksum: …
-
Modeling, Optimization and Estimation in Electric Arc Furnace (EAF) Operation
<p>The electric arc furnace (EAF) is a highly energy intensive process used to convert scrap metal into molten steel. The aim of this research is to develop a dynamic model of an industrial EAF process, and investigate its application for optimal EAF operation. This work has three main …
-
Current Distribution and Metal Flow in an Electric Arc Furnace
… and Metal Flow in the crucible of an Electric Arc Furnace is investigated using a small-scale, three dimensional model. Results obtained indicate that current distribution for furnaces of different sizes and ratings may be predicted using one model. Naturally occurring metal flow is …
-
Determination of the Defects in a General Electric Arc-Welding Generator
… purpose of determining why a belt-driven General Electric Arc-welding Generator would not operate satisfactorily. In previous operation of this machine there appeared to be no residual magnetism in the pole-pieces. When the machine was brought up to speed, there was only a small voltage produced …
Page 1 of 13