Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 34 for “"electrical injection"”.
-
SiGeSn Light-Emitting Devices: from Optical to Electrical Injection
… on developing the GeSn-based lasers towards the electrical injection. The development process starts with the bulk lasers by optically pumping. By incorporating Sn in the active region and leaving the threading dislocation away from the active region, the maximum operating temperature (Tmax) of …
-
Electrical injection and detection of spin polarization in InSb/ferromagnet nanostructures
… studies of the electical detection of spin injection and transport in InSb/CoFe heterostructures. As a narrow gap semiconductor, InSb has a high mobility and strong spin-orbit interaction. Using ferromagnetic CoFe, lateral InSb/CoFe devices are fabricated by semiconductor processing …
-
Minority carrier lifetimes in germanium and silicon
… has been undertaken. A comparison of optical and electrical injection methods, as reported in the literature is given. An optical arrangement, including a coaxiallized spark gap system, is described. Sample preparation is discussed with respect to surface treatments. A well etched surface (CP4 …
-
Photonic crystal emitters in heterogeneously bonded membranes
… lasers must operate continuous wave (CW) under electrical injection at room temperature and be manufactured by reproducible methods. To date, no PhC membrane design has met all of these criteria. In this dissertation, a novel PhC membrane device that combines heterogeneous bonding and lateral …
-
Millimetre-wave optically injection-locked oscillators for radio-over-fibre systems
… results for millimetre-wave optically injection-locked oscillators are presented in this thesis. Such oscillators can be employed to replace conventional photodiode plus amplifier receivers for local oscillator signal reception in millimetre-wave radio-over-fibre systems. The theories …
-
Arrays of quantum-light-emitting diodes with site-controlled pyramidal quantum dots
… photon pairs, by both optical and electrical injection (with triggering on demand). However, conventional self-assembled QDs nucleate randomly and possess finite values of finestructure splitting (FSS) in the excitonic states, mainly due to low crystal symmetry, which adds hurdles …
-
Metalorganic chemical vapor deposition growth development for ultraviolet vertical cavity surface emitting lasers
… to characterize these structures. A traditional electrical injection VCSEL consists of several key structure components including, top and bottom distributed Bragg reflectors (DBRs) for forming the vertical cavity, spacer layers for optical mode alignment as well as carrier transport, and …
-
Novel nanolasers, nano-LEDs, and modal cutoff confinement light emitters
… and demonstrate operation with current injection at room temperature. We first examined metal-cavity quantum-dot surface-emitting micro-lasers. Different sizes of metal-DBR cavities are fabricated with cavity volume reduction both in the lateral and vertical dimensions following our …
-
Development of prototype polaritonic devices exploiting the macroscopic bosonic properties of polaritons in semiconductor microcavities
… polariton light emitting diode by efficient electrical injection through the inorganic part of the structure. Furthermore, we realize a polariton based THz detector by investigating polariton interference patterns created on a high quality semiconductor microcavity ridge. By angle-resolved …
-
Thermal Effects on Spin Currents in Non-Local Metallic Spin Valves
… I present measurements of thermal and electrical spin injection in nanoscale metallic non-local spin valve (NLSV) structures. Informed by measurements of the Seebeck coefficient and thermal conductivity of representative films made using a micromachined Si-N thermal isolation platform, …
-
Surface-emitting lasers for communications: novel metal-cavity microlasers and high-contrast-grating tunable VCSELs
… temperature under continuous-wave and pulsed electrical injection with 3-μm and 1-μm cavity diameters, respectively. This work provides the research path toward dense-integrable power-efficient on-chip light sources. Surface-emitting tunable lasers for high-speed, long-haul communication are …
-
Optics of atomically thin films and van der Waals heterostructures made from two-dimensional semiconductors
… the external quantum efficiency (EQE) under electrical injection. We also present PL characterisation of LEDs based on vdW heterostructures comprising WSe2 and MoSe2 as active layers. Temperature dependent experiments show unusual enhancement of the EQE with temperature in WSe2 in contrast to …
-
Fabrication and Characterization of Electrically Injected Photonic Crystal Light Emitters
Electrically injected photonic crystal light emitters with spatially localized gain are explored with the goal of understanding the optical and electrical characteristics of these devices from theoretical and experimental perspectives. Localization of the quantum well layer into the defect region …
-
Metal-cavity surface-emitting nanolasers
… and experimental data are reported for electrical injection metal-cavity quantum-dot surface-emitting microlasers at room temperature. Detailed studies are conducted of size-dependent cavity modes for future size reduction. This thesis presents the accomplishment of the first room …
-
Engineering nonlinearities in organic and hybrid microcavities
… observation of strong coupling regime under electrical injection suggests the possibility for an effective exploitation of such unique polaritonic features in a electro-optic device.
-
Design and fabrication of vertical external cavity surface-emitting lasers
… mirrors, to examine the tradeoff in their electrical and optical properties. This tradeoff is integral to both the VCSEL and VECSEL designs. A simulation of the VCSEL devices is performed and compared to experimental characterization. Based on these results, VECSEL devices are then designed …
-
Dielectric micro-cavity surface-emitting lasers
… µm have been demonstrated under continuous wave, electrical injection at room temperature. Threshold currents from devices with different diameters were collected for further study. The working devices generally had threshold currents around hundreds of µA, while their metal-cavity counterparts …
-
Theory of near infra-red germanium lasers
… gain. Recently, both optically pumped and electrical injection pumped lasing have been reported in Ge-on-Si devices. This work aims to perform gain modeling in a germanium laser grown on a silicon substrate which operates in the near infrared wavelength communications band. A description of …
-
Carrier dynamics in high-speed III-nitride light-emitting diodes for visible-light communication
… to characterize the carrier dynamics in LEDs, electrically injected methods are preferred over optically pumped methods to capture the carrier dynamics under typical operating conditions. In this dissertation, a comprehensive method is developed to study carrier dynamics in electrically …
-
Electronic and spintronic transport in germanium nanostructures
… overall circuit performance and functionalities. Electrical injection of spin-polarized electrons into a semiconductor, large spin diffusion length, and an integration friendly platform are desirable ingredients for spin based-devices. Here we demonstrate lateral spin injection and detection in Ge …
Page 1 of 2