Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 185 for “"electrochemical sensor"”.
-
Electrochemical sensor interface
… in nanotechnology have led to the development of electrochemical sensors that utilize electrodes with a width of one micron or less. This increased sensitivity has opened up a range of new electrochemical sensing applications, allowing the technology to move beyond the confines of the laboratory …
-
An electrochemical sensor for forane
… the development and laboratory assessment of an electrochemical sensor for the detection and measurement of the volatile inhalation anaesthetic, forane. Investigations were therefore based on the heterogeneous and homogeneous reduction of this agent in non-aqueous electrolyte.</p> <p>Preliminary …
-
Development and application of an oxygen electrochemical sensor
In this project, we developed a real-time electrochemical mediator assay to enable the assessment of cell numbers and cell viability. It allows us to monitor metabolism calculable down to a single cell in a low cost easy to use rapid assay, as yet not possible with current technology. The developed …
-
Smart-phone-based electrochemical sensor for environmental applications
… integrated plug-n-play microelectronic ionic sensor that performs electrochemical measurement by using audio jack of a smart phone. This platform was used to measure nitrate concentration using a few microliter liquid samples on field along with providing geospatial map locations through a …
-
Impedance extraction microsystem for nanostructured electrochemical sensor arrays
Thesis (Ph. D.)--Michigan State University. Department of Electrical Engineering, 2008
-
Fabrication of miniaturised electrochemical sensor for cancerogenic biomarker detection /
In this dissertation simplification of sensor fabrication for carcinogenic metabolite H2O2 and biomarker carbohydrate antigen 125 sensing is demonstrated. The work explores combining of soft lithography and wet etching for rapid and simplified interdigitated microarray electrode fabrication and …
-
Development of an electrochemical sensor for detection of 2,4-dinitrotoluene.
… over interferents commonly tested for DNT sensors. Chapter 8 explores increasing the electrochemical window for solvent/electrolyte systems. This research has a large bearing on increasing the bias voltage window accessible for electrochemical capacitor devices. While this chapter is a …
-
Development of an Electrochemical Sensor for Quantification of Soil Phosphorus
… are expensive and labor- and time-intensive. Electrochemical sensors have shown potential as low-cost, instant, accurate, and reliable measurement tools for various nutrients and chemical properties. In this thesis, electrochemical P sensors based on potentiometric and cyclic voltammetry …
-
DEVELOPMENT OF MICROBIAL ELECTROCHEMICAL SENSOR FOR TOXICITY SCREENING OF INFLUENT WASTEWATER
A microbial electrochemical sensor (MES) that is capable to detect influent wastewater toxicity was presented, having the characteristics of being quick, preventative, simple, inexpensive, on-line, and relevant to the activated sludge process. The MES was firstly optimized in terms of both sensing …
-
45-nm SOI CMOS Bluetooth Electrochemical Sensor for Continuous Glucose Monitoring
… of a Bluetooth-based energy-harvesting glucose sensor for contact-lens integration using 45~nm silicon-on-insulator (SOI) complementary metal-oxide-semiconductor (CMOS) technology. The proposed glucose monitoring system includes a Bluetooth transmitter implemented as a two-point closed loop PLL …
-
State Estimation and Economic Analysis for Electrochemical Sensor-Based Corrosion Monitoring
… a nonlinear state estimator across multiple sensor networks. Subsequently, economic analysis is conducted considering market elasticity to assist in decision-making for sensor network placement investments. One key boiler component that undergoes corrosion damage is the waterwall (WW). The …
-
Laboratory evaluation of a microfluidic electrochemical sensor for aerosol oxidative load
… a Particle Into Liquid Sampler with microfluidic-electrochemical detection. This 'on-line' system allows continuous monitoring of PM reactivity (~three minute measurement resolution) from substantially reduced sample masses (nanograms). This study reports on a laboratory evaluation of the on-line …
-
Electrochemical sensor system architecture using the CMOS-MEMS technology for cytometry applications
… the development process of an integrated sensor-system-on-chip for recording the parameters of blood cells. The CMOS based device consists of the two flow-through sensor arrays, stacked one on top of the other. The sensors are able to detect the biological cell in terms of its physical …
-
The Formation of an Electrochemical Sensor for the Selective Detection of Dopamine
… film that can be used as novel dopamine (DA) sensor. This material exhibited a higher sensitivity to DA in comparison to the several other polypyrrole modified electrodes that were investigated in this study and it was also highly selective towards DA in the presence of a wide variety of major …
-
Enhancement of electrochemical sensor performance through the optimisation of nucleic acid probe architecture
… at a low cost, often in challenging environments Electrochemical methods can serve as the workhorse in achieving such goals, with its power in discriminating variations to a series of properties that describe a bioelectric interface. Simply, these interfaces are composed of an immobilised …
-
Development of an electrochemical sensor based on polypyrrole and modification of its properties /
Electrochemical sensors play an important role in various industries and applications in different areas, including environmental monitoring, healthcare, safety, and industrial processes. They can be used to detect and quantify specific chemical compounds or elements. The market for electrochemical …
-
Design and Fabrication of Microfluidic Electrochemical Sensor for Lead Detection in Drinking Water
This research aimed to enhance microfluidic electrochemical sensors for water quality analysis by simplifying fabrication and leveraging secondary flow effects. Using low-cost materials and laser-cutting techniques, sensors were constructed and characterized. Graphene-carbon paste electrodes were …
-
Low-Power and High Precision Sensing Circuit for a Three-Channel Electrochemical Sensor
A discrete, compact, low-power sensor readout circuit that can simultaneously handle two current measurements, and one voltage measurement. This work provides a compact, low-power sensor architecture, with the intent for the serial readout to be replaced with a low-power radio frequency transmitter …
-
Developing a novel heterogeneous three electrode system for a PDMS-based microfluidic electrochemical sensor
Biosensors have seen an increased use in recent years as an in situ testing device for various industries such as agriculture, environmental sustainability, food, health, etc. On-site testing devices have an advantage over traditional testing system because they can be used for real-time monitoring …
Page 1 of 10