Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 49 for “"electrodeposits"”.
-
Structure of nickel-iron and nickel-zinc electrodeposits
Electrodeposited nickel-iron and nickel-zinc alloys have been studied using `direct' methods e. g. XRD, microscopy, EDX and GDOES on coatings having different thicknesses and deposited on different substrates. The work has confirmed and extended the ideas of Finch et al. (2, 51), Piontelli et al. …
-
The Influence of a Superimposed Alternating Current on the Structure and Porosity of Gold Electrodeposits
The structure and porosity of gold electrodeposits produced by conventional direct current plating and by plating with an asymmetric square wave alternating current have been studied. Simple electrolytes free from any gddation agents or alloying elements were used as well as proprietary alloy gold …
-
The influence of chloride on interface kinetics and morphology of copper electrodeposits on copper single crystals
The influence of chloride on the kinetics and morphology of copper electrodeposition on copper single crystal in acidified copper sulfate solution was studied by atomic force microscopy (AFM) and by electro-analytical methods. AFM was employed to image deposits on low-index single crystal copper …
-
In-situ study of the influence of additives on the growth behavior of copper electrodeposits on copper single crystal
… known to be essential in obtaining desired metal electrodeposits in the microelectronic industry, however, fundamental design principles for their use and a scientific understanding of their interaction during electrodeposition is lacking. In the present study we investigated electrodeposition of …
-
Surface morphology characterization of industrial zinc electrodeposits as a function of chemical additives using atomic force microscopy and scaling analysis
… time on the morphology of short-time zinc electrodeposits was studied using Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM) and scaling analysis. SEM and AFM were utilized to capture high-resolution images of zinc samples produced between 10 and 90 minutes of deposition …
-
The electrodeposition of copper on carbon
… was to study the properties of copper electrodeposits on carbon, to compare the various methods of electrodeposition as to adhesion to the carbon, nature of the interface, polishability, solderability, effect of the carbon surface, effect of temperature of plating, and to determine a …
-
Advances In The Electrodeposition Of Tantalum From Ionic Liquids In A Technical Plating Setup
… determine the effect on the deposition process. Electrodeposits formed during experimental trials were analyzed through the use of scanning electron microscopy (SEM) with energy-dispersive x-ray spectroscopy (EDS). This study represents particular advancements in the body of knowledge on …
-
Electrodeposition and reversibility of Lithium metal in liquid electrolytes
… of nucleation and early-stage growth of Lithium electrodeposits is firstly interrogated and is shown to be consistent across different liquid electrolyte chemistries. Next, based on an understanding of nucleation of Li in liquid electrolytes, certain halide rich electrolytes hypothesized to …
-
ΕΠΙΔΡΑΣΗ ΤΗΣ ΦΥΣΗΣ ΤΩΝ ΑΝΙΟΝΤΩΝ CL ΚΑΙ S04 ΣΤΗ ΔΟΜΗ ΚΑΙ ΤΙΣ ΙΔΙΟΤΗΤΕΣ ΤΩΝ ΗΛΕΚΤΡΟΛΥΤΙΚΩΝ ΕΠΙΘΕΜΑΤΩΝ ΝΙ
… OF STRUCTURE WERE MADE. THE PROPERTIES OF THE ELECTRODEPOSITS WERE STUDIED. A) CURRENT EFFICIENCY, B) CORROSION, C) REFLEXION, D) HARDNESS, E) QUALITY FACTOR Q.
-
ENABLING STABLE LITHIUM NUCLEATION AND GROWTH VIA CROSSLINKED POLYMER ELECTROLYTES AND ELECTRODE/ELECTROLYTE INTERPHASES
… (SEI) that results in rough, non-planar electrodeposits at all current densities. These challenges arise from coupling of chemical reactivity of Li, highly reducing potentials during battery charge, and the out-of-equilibrium transport phenomena that drive morphological instabilities at …
-
The influence of composition on the optical properties of electrodeposited gold
… to the measurement of the colour of gold alloy electrodeposits and to examine the factors that influence the colour of thin deposits. The minimum thickness of deposit required to produce its final colour and completely hide the underlying substrate was measured and found to depend on the nature …
-
ΗΛΕΚΤΡΟΛΥΤΙΚΗ ΑΠΟΘΕΣΗ ΝΙΚΕΛΙΟΥ ΜΕ ΧΡΗΣΗ ΠΑΛΜΙΚΟΥ ΡΕΥΜΑΤΟΣ ΜΕΤΑΒΑΛΛΟΜΕΝΗΣ ΦΟΡΑΣ
… PROPERTIES (HARDNESS-ROUGHNESS) OF THE NICKEL ELECTRODEPOSITS. THE BEST PREPARATION CONDITIONS OF SMOOTH AND HARD NICKEL ELECTRODEPOSITS OF DEFINED CRYSTAL STRUCTURE WERE DETERMINED AS WELL. THE NICKEL ELECTRODEPOSITION WAS REALISED FROM A WATTS TYPE BATH ON A ROTATED CATHODE, THE CRYSTALLITES …
-
Molten Salt Technologies for Advanced Nuclear Fuel Cycles and Molten Salt Reactors
… and fluoride salts on the morphology of uranium electrodeposits. The results show that tungsten performs best compared to other quasi-reference electrodes and useful analysis with cyclic voltammetry is limited by the concentration of the analyte. There were several material issues that should be …
-
In Situ Infrared Spectroscopic Studies of Electrodeposition Additive Adsorption on Copper
CTA with bisulfate counterion promoted smooth electrodeposits. Secondary ion mass spectroscopy (SIMS) depth profiles indicated that CTA was not significantly incorporated into copper deposits grown in the presence of CTA with HSO$\sb4\sp-$ counterion, except at very high overpotentials ($>$500 mV). …
-
The Role of the Halides as Addition Agents During the Electrodeposition of Copper
… use of radiotracers. It has been found that the electrodeposits have a surface layer which is enriched in chloride ion. Evidence has been obtained that incorporation of chloride is preceded by the formation of cuprous chloride. The incorporation of chloride has been found to be increased by the …
-
Φωτοηλεκτροχημεία ηλεκτροαποθεμάτων Cd(Zn)Se: παρασκευή και χαρακτηρισμός φωτο-ηλεκτροδίων TiO2/CdSe
… part, with subdivisions A for Cd(Zn)Se electrodeposits on metal substrates (Chapters II-1 to II-4) and B for CdSe electrodeposits on titanium oxide substrates (Chapters II-5 to II-7); Section III, including appendices for symbols, abbreviations and terms, followed by the list of cited …
-
Analytical Electrochemistry of Nickel, Platinum, and Platinum-Nickel Electrodepositions
Nickel and platinum electrodeposits have numerous applications in corrosion and wear-resistant coatings, electronic connectors, heat resistance, metal finishings, and catalysts. The addition of additives can vastly change the morphology of the deposition. Electrokinetic parameters can be calculated …
-
Εφαρμογή παλμικού ρεύματος στην ηλεκτρολυτική συναπόθεση μικροσωματιδίων ZrO2 σε μήτρα Ni υπό συνθήκες ισχυρής ανάδευσης: μελέτη μικροδομής και ιδιοτήτων των επικαλύψεων
… the potential to produce various composite electrodeposits by choosing different types of reinforcing materials and different metal matrixes. Generally speaking, electrolytic co‒deposition provides superior control over the operating parameters of the process, it has relatively low operating …
Page 1 of 3