Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 391 for “"electroless"”.
-
Electroless Atomic Layer Deposition
… to a monolayer. We demonstrate combination of electroless monolayer formation and Surface Limited Redox Replacement to deposit thin film selectively on Cu nanowires and polycrystalline Cu wafer irrespective of another metal and oxide surrounding. Such protocol expands a new horizon in the field …
-
Tin Sensitization For Electroless Plating
The tin sensitization process has been used in electroless plating since 1940s Brenner and Riddell developed the electroless plating for surface metallization method. It was found to be an interesting topic to study tin sensitization for chemically controlling metal deposition on different …
-
Evaluation of electroless nickel-phosphorus (EN) coatings
The utilization of Electroless Nickel-Phosphorus (EN) coatings has witnessed a staggering increase during the last two decades. Many outstanding characteristics of the EN coating method have generated a lot of interest in various industries including oil and gas, electronic, chemical, automotive, …
-
Micro-grooving on electroless nickel plated die materials
… of 00,+50 and -50 during micro grooving on electroless nickel plated molding dies. It was found that diamond tools with the 00 rake angle have superior performance compared to those with +50 and -50 with respect to tool wear, cutting forces, and machined surface roughness. Tool wears on the …
-
Emissions of formalderhyde from electroless copper plating operations
Master of Science (M.S.)
-
Enhanced Adhesion Between Electroless Copper and Advanced Substrates
In this work, adhesion between electrolessly deposited copper and dielectric materials for use in microelectronic devices is investigated. The microelectronics industry requires continuous advances due to ever-evolving technology and the corresponding need for higher density substrates with smaller …
-
Development of a novel method in electroless copper plating
The modern day electroless copper plating solution commonly consists of copper ions, chelating agents, buffers, stabilizers, accelerators and surfactants. The roles of chelating agents, stabilizers and surfactants in the plating solution were investigated with emphasis on the plating rate and …
-
Ultra-precision machining of electroless-nickel plated die material
… distance during ultra-precision machining of electroless-nickel. The experimental results show that higher feedrate gives worse surface and higher cutting forces, however with the increase of phosphorus content surface becomes better and cutting forces decrease. It appears that depth-of-cut …
-
Consumption and loss of formaldehyde in electroless copper plating
… and distribution of formaldehyde losses from the electroless copper plating process. Plating and rinse bath samples obtained from three electroless copper plating operations were analyzed for formaldehyde and copper in order to develop a mass balance analysis about the plating bath for periods of …
-
Palladium-silver membranes fabricated by electroless co-deposition technique
Includes bibliographical references (pages 93-95).
-
Electroless nickel-phosphorus (EN) coatings on magnesium and magnesium alloys
… treatment or coatings. Of these techniques, electroless nickelphosphorus (EN) coating is one of the most effective methods to combat the problems. The objective of this research is to understand the relationships of processing, microstructure and properties of EN coatings on Mg alloys, and …
-
Investigation of peculiarities of cobalt and its alloys electroless deposition /
As new technological tasks arise, electroless coatings on the basis of cobalt have come into use in microelectronics and micromechanics in order to form a protective layer against copper migration in integral schemes. Copper possesses a low specific resistance, however it also has some …
-
Applications for the Electroless Deposition of Gold Nanoparticles onto Silicon
… were deposited onto a silicon substrate using electroless deposition. The process was optimized by adjusting the deposition time, the temperature of the plating solution, the amount of time that the silicon was exposed to hydrofluoric acid, and the concentration of the plating solution. The …
-
Nanoscale Characterization and Mechanism of Electroless Deposition of Silver Metal
… the nanoscale characteristics and mechanism of electrolessly deposited silver metal seeded by gold nanoparticles. The process of growing seed-nanoparticles on a polymer surface was studied. Several bifunctional amines and organic reducing agents were used to explore how these chemical factors …
Page 1 of 20