Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 111 for “"electroless plating"”.
-
Tin Sensitization For Electroless Plating
The tin sensitization process has been used in electroless plating since 1940s Brenner and Riddell developed the electroless plating for surface metallization method. It was found to be an interesting topic to study tin sensitization for chemically controlling metal deposition on different …
-
Metal seed deposition from organic solutions for subsequent electroless plating
… substrates from organic solutions for subsequent electroless Cu plating is being developed. The mechanism is based on spontaneous electrochemical displacement reactions. The more noble metal is reduced and deposited on the substrate surface; simultaneously the less noble metal is oxidized and …
-
Investigation of Additives for Use in Electroless Plating Solutions for Fabrication of Nanowires
This study focused on improvement of electroless plating methods by use of particular bath additives. The techniques developed here can enable us to plate very thin layers selectively on a nonconductive substrate and thus create metallized features on a nanoscale. Through the development of such …
-
Electrochemistry of Electroless Plating on Optical Fiber for Sensors and Vanadium sulfide Cathodes for Batteries
… this work, first, nickel, copper, and iron were electrolessly coated on a single mode optical fiber and confirmed by Scanning Electron Microscope (SEM) and X-ray Photoelectron Spectroscopy (XPS). An Optical Backscatter Reflectometer (OBR) was then used to obtain optical measurements during …
-
Coking resistant Pd-Au composite membranes and Cu-based electrodes by electroless plating for H₂ separation and purification
In this work, electroless plating (ELP) was used to fabricate thin metal films for hydrogen separation and purification applications. The first section focused on Pd-Au alloy composite membranes because pure Pd was susceptible to sulfur and carbon poisoning which adversely affected the throughput …
-
Sensitivity alteration of fiber Bragg grating sensors through on-fiber metallic coatings produced by a combined laser-assisted maskless microdeposition and electroless plating process
… Maskless Micro-deposition (LAMM) and electroless plating process. The coatings can also protect the brittle FBG used in harsh environments. The thesis encompasses design, fabrication procedures, modeling and comparison of experimental and modeling results to gain insight into the …
-
Untersuchungen zur Sensibilisierung von Glasoberflächen mit Zinkoxid für das electroless plating von Nickel-Phosphor-Schichten unter besonderer Beachtung des Einsatzes derartiger Metallschichten als Elektroden in elektrochemischen Sensoren
… von Silikatglasoberflächen mit Zinkoxid für das electroless plating von Nickel-Phosphor-Schichten beschrieben. Die Strukturierung erfolgte mit einem photolithographischen Prozess. Die so sensibilisierten Glasoberflächen wurden in einer sauren Palladiumchloridlösung aktiviert und in einer …
-
Functionalization of particles and selective functionalization of surfaces for the electroless metal plating process
Electroless plating is a metal deposition technique widely used in the coating industry. It is the method of choice to plate substrates with complex geometries and nonconductive surfaces, such as polymers and ceramics, since it is based on a chemical reduction in solution rather than on an external …
-
Metallization of DNA and DNA Origami Using a Pd Seeding Method
… a Pd seeding method in association with electroless plating, to successfully metallize both lambda DNA and DNA origami templates on different surfaces. On mica surfaces, this method offered a fast, simple process, and the ability to obtain a relatively high yield of metallized DNA …
-
Patterning and adhesion characterization of mettalization for a microelectronics packaging application
… (4VP) AND THE SUBSEQUENT SELECTIVE ELECTROLESS PLATING OF COPPER MICRO-PATTERNS ON SO-MODIFIED SURFACE. STUDIES SHOW THAT THE GRAFTED 4VP POLYMER SERVES AS A GOOD ADHESION PROMOTION LAYER IN ADDITION TO SERVING AS A PROMOTION LAYER FOR THE ELECTROLESS PLATING PROCESS. THE SECOND PART …
-
Separation and reaction using porous and palladium membranes
… composite membranes were prepared using the electroless plating technique with a-alumina tubes as substrates. The electroless plating technique employed consisted of the conventional two step sensitization-activation method and a hydrazine-based plating bath. Vacuum was used at the initial …
-
Study of microtubule templates for fabrication of nano-interconnects
… assembly and their ability to be metallized by electroless plating make them good candidates to serve as templates for the fabrication of nanowires and other nanoscale devices. In addition, tubulin proteins can provide biological interactions with a naturally high specificity.Toward the goal of …
-
Fabrication and Characterization of a Disk Ring Shaped Dual Nanometer-Sized Electrode and Its Application to Generation-Collection.
… well as formation mechanism of the gold film by electroless plating are discussed.
-
Low temperature processes for the front-side metallization of crystalline silicon solar cells
… better understanding of the metal deposition by electroless plating on silicon wafers has been achieved and excellent results were obtained by combining this technique with alternative patterning methods for the front-side dielectrics. Further work is required to get these processes up to …
-
Metal-based composite microcapsule shells: development of new synthesis methods and characterisation of transport properties
… and deposition of a secondary metal film via electroless plating, resulting in gold coated emulsion droplets. Colloidal silica stabilised emulsion droplets have been coated in poly(dopamine) (PDA) resulting in core-shell microcapsules where the shell is a binary mixture of polymer and …
-
Design and fabrication of micro transducers using cured SU-8 polymer as main structural material
… with titled E-beam deposition and selectively electroless plating techniques. The adhesion properties between metallic surface and SU-8 polymer were measured firstly. After comparing different metals, Au was chosen as the base material for electroplating for its good adhesion to SU-8. …
-
Advanced electroless metallisation of high efficiency laser doped and inkjet printed silicon solar cells
… we select a suitable metallisation technique for plating double sided or interdigitated contact solar cells; identify and understand the current problems faced using this metallisation technique; establish techniques to overcome these limitations; and evaluate the performance of the proposed …
Page 1 of 6