Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 55 for “"electrolyte additive"”.
-
Polyethylene Glycol as an Electrolyte Additive for Rechargeable Hybrid Aqueous Batteries
… to their greater solubility in the sulfate-based electrolyte. In the first project, 1 vol.% PEG200 is able to improve the discharge capacity of ReHAB cells compared to the control electrolyte after 300 cycles. This is accomplished via minimizing corrosion and dendrite growth at the anode. …
-
Fluoroethylene carbonate effects as an electrolyte additive on the initial cathode electrolyte interface
… increase lifespan, safety, and energy density. Electrolyte additives can provide a safe and economical route towards fast charging applications for layered mixed transition metal oxides. One such system of interest is the LiNiMnCoO (NMC) cathode paired with a graphite anode and the standard …
-
Silicon-based thin-film anodes for lithium-ion batteries using physical vapour deposition
… of Si anodes. In addition, the impact of electrolyte-additive and battery testing protocol was studied, which resulted in a high-capacity retention pure Si anode. Also, Si-Sn anodes proved to be promising candidates for high charge/discharge rate batteries.
-
An integrated development of high-capacity Lithium-sulfur (Li-S) batteries : cathodes, separators, and lithium-metal anode
… the polysulfide migration. Third, a new electrolyte additive was successfully synthesized to mitigate the polysulfide migration. The electrolyte additive and polysulfides form bulkier polysulfide complexes that are then size-selectively sieved by the separator. Moreover, a protected …
-
STUDIES OF ANODES AND THEIR INTERACTIONS WITH ELECTROLYTES IN SODIUM-ION BATTERIES
… in detail the interaction between anodes and electrolytes. More specifically, Na2Ti3O7/C, graphite, and hard carbon were tested in a non-flammable ether-based electrolyte, 1M NaBF4 in tetraglyme and carbonate-based electrolyte, 1M NaClO4 in EC:PC. Cycling performance in half-cell and full-cell …
-
HIGH-PERFORMANCE LITHIUM-OXYGEN BATTERIES WITH LOW CHARGE OVERPOTENTIALS ENABLED BY ELECTROLYTE ADDITIVES
… Li2O2. In this thesis, we aim to develop electrolyte additives to address these issues comprehensively for high-performance LOBs. Firstly, we investigated the Li+ complexation of a crown ether-based compound. Its strong adsorption ability towards Li+ increases the solubility of Li2O2 and …
-
Novel Cathode Framework, Effective Electrolyte Modification, And Electrode Structural Modification Of High Performance Lithium Sulfur Batteries
… method of using transition metal cations as the electrolyte additive has been proven to be capable of protecting lithium metal anode effectively. As a summary, the result of the research could result in a more rational design of novel lithium-sulfur batteries with high performance. It serves as …
-
Synthesis and electrochemical studies of novel ionic liquid based electrolytes
… have received substantial interest as nonaqueous electrolytes in lithium ion- and metal-air batteries in recent years due to their low volatility, non-flammability, wide liquid range, and thermal stability characteristics. Towards developing a new generation of high specific energy lithium ion …
-
Using X-ray photoelectron spectroscopy to understand the solid electrolyte interphase formation in sodium ion batteries
… lithium's important characteristics. The solid electrolyte interphase (SEI) forms on the surface of the anode in both sodium and lithium-ion batteries. The SEI effects battery performance, particularly in sodium batteries, and understanding how it forms is critical for developing sodium ion …
-
Electrochemical Study of Ammonium Interaction with Au,Sn and Cu Electrodes in Nonaqueous Electrolytes
Nonaqueous electrolytes play an important role in electrochemical devices such as flip chip and lithium-air batteries. In this work, we examine ammonium-Cu, Sn and Li interactions in nonaqueous electrolytes to optimize the future flip chip flux and electrolyte additive of lithium-air battery. The …
-
A study of the anodic behaviour of aluminium alloys in alkaline electrolytes
… potentials. Performance, of various alkaline electrolytes have also been examined and considerable progress has been made in this area. A review of the available literature reveals a list of several elements which are suitable for alloying with aluminium as regards reducing corrosion and …
-
Noble metal-free cathode and electrolyte materials for low-cost, efficient Li-CO₂ batteries
… this dissertation, noble metal-free cathode and electrolyte materials are developed to improve the energy efficiency, capacity, and cycle life of lithium - carbon dioxide (Li-CO₂) batteries. These performance enhancements are achieved by reducing the overpotentials of the carbon dioxide reduction …
-
DEVELOPMENT OF FLEXIBLE TRIBOELECTRIC NANOGENERATORS AND SOLID-STATE LITHIUM-ION POLYMER BATTERIES FOR ENERGY CONVERSION AND STORAGE PURPOSES
… biofilm formation without using any chemical additives. Analysis of pattern amplitude and wavelength correlation to output power is uniquely provided for a deeper understanding of how patterned TENGs enable peak performance. The last part of this work presents the fabrication and …
-
Anodic Considerations for Power Optimization of Aluminum-Air Batteries
… aluminate ions. In this investigation, aluminum-electrolyte interactions were first studied in a three-electrode cell. Optimal discharge conditions were determined then applied in a full-cell configuration. Pulsing protocols were then explored as a way to improve extended discharge behavior. …
-
Lithium-sulfur batteries: an investigation into the electrolyte and the polysulfide species within
… design and the effect of lithium nitrate as an electrolyte additive is investigated. To obtain a thorough understanding of the electrolyte system used throughout this report (LiTFSI in DOL), various electrolytes containing different concentrations of the electrolyte salt are prepared and …
-
Innovative Strategies for Stabilizing Zinc Anodes: From Molecular Design to Practical Zinc-Ion Batteries
… environmental friendliness. However, the anode-electrolyte interface in AZIBs is prone to instability due to severe dendrite growth, self-corrosion, parasitic water-induced side reactions, and hydrogen evolution reactions (HER), which collectively lead to poor cyclability. To date, various …
-
Metal oxide & oxyhydroxide materials for solar water oxidation
… technique using N-methylimidazole as an electrolyte additive. The resulting FeOOH films are high quality and can act as a protective layer even for thicknesses on the order of 10 nm and above. The FeOOH films have a high activity relative to other materials that can be deposited under …
-
Studies of potential anode materials for lithium-ion batteries
… growths which pose extreme safety hazards. An electrolyte additive was developed using potassium ions to overcome this dendrite issue. Dendritic growth was completely halted when this additive was used, and the cells cycled stably over the entire 18 day test period. The corrosion layer that …
-
Silicon and germanium battery materials : exploring new structures, surface treatments, and full cell applications
… During cycling, the anode will react with the electrolyte, forming a passivating solid electrolyte interphase (SEI) layer on the surface, which is crucial to stable battery function. The formation of this layer is influenced by the surface chemistry of the active material. Ge NWs with different …
-
Microemulsion Electrolytes for Redox Flow Batteries
… covers exploration of microemulsions as electrolytes for redox flow batteries (RFBs). Microemulsions are structured fluids comprised of oil, water, and emulsifiers that allow for the unique combination of nonaqueous redox species with aqueous supporting electrolyte.</p> <p>We demonstrated …
Page 1 of 3