Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 27 for “"electrolyte supported"”.

  1. Numerical Simulation Of Electrolyte-supported Planar Button Solid Oxide Fuel Cell

    … 600oC to 1000oC and employ solid ceramics as the electrolyte. In Solid Oxide Fuel Cells oxygen ions (O2- ) are the ionic charge carriers. Solid Oxide Fuel Cells are known for their higher electrical efficiency of about 50-60% [1] compared to other types of fuel cells and are considered very …

    ucf Repository record for Numerical Simulation Of Electrolyte-supported Planar Button Solid Oxide Fuel Cell (opens in a new tab)

  2. Investigations of cobalt-based oxides as cathode materials for intermediate-temperature solid oxide fuel cells

    … on the Co(IV)/Co(III) redox couple. With an LSGM electrolyte-supported single test cell and NiO+GDC as anode, the maximum power densities Pmax at 800 ºC reach 927 and 1180 mW·cm⁻² for SYCO and BBSC cathodes, respectively. The oxygen-deficient perovskites Sr[subscript 1-x]R[subscript …

    texas Repository record for Investigations of cobalt-based oxides as cathode materials for intermediate-temperature solid oxide fuel cells (opens in a new tab)

  3. Development of electrocatalysts/electrodes for their application in H2O (or H2O + CO2) co-electrolysis processes in high temperature solid oxide electrolysis cells

    … SOECs comprised a circular shaped, planar − electrolyte (8YSZ) with GDC10 (Gd0.10Ce0.90O2-x)│LSCoF (La0.6Sr0.4Co0.8Fe0.2O3-δ) as oxygen electrode.In regards to the H2O/CO2 co-electrolysis process, it is widely accepted that the fuel solid oxide electrodes meet a complex environment, where …

    greece Repository record for Development of electrocatalysts/electrodes for their application in H2O (or H2O + CO2) co-electrolysis processes in high temperature solid oxide electrolysis cells (opens in a new tab)

  4. Ceramic-Based Anodes for Solid Oxide Fuel Cells

    … using La0.8Sr0.2Ga0.83Mg0.17O3-δ (LSGM) as the electrolyte. Peak power density of the LSGM electrolyte-supported all-perovskite ceramic cell can reach 460 mW cm-2 at 800 oC using H2 as fuel and ambient air as oxidant. LSGMn anode also has shown reasonably good sulfur tolerance when tested in H2 …

    south-carolina Repository record for Ceramic-Based Anodes for Solid Oxide Fuel Cells (opens in a new tab)

  5. Aging Effects of the Cathode and Determination of Single Electrode Performance in a Solid Oxide Fuel Cell

    … For the ring reference electrode on the anode-supported cell, the data support that the cathode impedance includes impedance from the anode in the 3-electrode measurement. On the electrolyte-supported cell, using both the ring reference electrode and a micro-reference electrode close to the …

    wvu Repository record for Aging Effects of the Cathode and Determination of Single Electrode Performance in a Solid Oxide Fuel Cell (opens in a new tab)

  6. Microstructural Control and Characterization of Bi2V0.9Cu0.1O5.35 (BICUVOX) Ceramics

    … solid-oxide fuel cells (SOFCs) and solid-oxide electrolyte cells (SOECs) is primarily limited by material degradation issues related to the required high temperature operation (>800°C). Applications of stabilized zirconia based electrolytes, which are the most commonly used oxide ion conductors, …

    wvu Repository record for Microstructural Control and Characterization of Bi2V0.9Cu0.1O5.35 (BICUVOX) Ceramics (opens in a new tab)

  7. Effects Of A Ketogenic Diet Intervention On Affective Valence In Recreational Distance Runners

    … with placebo (KDP), or a ketogenic diet with electrolyte supplementation (KDE). After a 2-week baseline on a standard diet, participants followed their assigned diet for 8 weeks. Psychological outcomes were measured weekly using the Activation-Deactivation Adjective Checklist (AD ACL) and …

    wayne-thes Repository record for Effects Of A Ketogenic Diet Intervention On Affective Valence In Recreational Distance Runners (opens in a new tab)

  8. High Temperature Co-electrolysis of Carbon dioxide and Steam in a Solid Oxide Cell for Synthesis Gas Production

    … Additionally, the performance of a NextCellTM electrolyte supported cell was investigated for CO2 electrolysis and CO2/H2O co-electrolysis with an aim to gain a better understanding of the reaction mechanism. During CO2 electrolysis, an increase in cell area specific resistance was observed …

    whiterose Download PDF for High Temperature Co-electrolysis of Carbon dioxide and Steam in a Solid Oxide Cell for Synthesis Gas Production (opens in a new tab)

  9. New materials for electrochemical synthesis of ammonia

    … Attention also has been given to developing new electrolyte materials based on oxide-carbonate composites, with the aim of exploring their application in ammonia synthesis at low operating temperature (< 500 °C). Ammonia was synthesised from H? and N? using an electrolyte supported cell based on …

    strathclyde Repository record for New materials for electrochemical synthesis of ammonia (opens in a new tab)

  10. Microstructural Engineering of Porous Cathodes for SOFC Applications

    … spectroscopy (EIS) of cathode symmetrical electrolyte-supported cells.;The porous cathode architecture formed through in situ foaming with 70% solids loading and a polymer precursor composition of 8:4:1 volume ratio (isocyanate: PEG: surfactant) within an terpineol/cellulose printing …

    wvu Repository record for Microstructural Engineering of Porous Cathodes for SOFC Applications (opens in a new tab)

  11. Ceramic Materials Development for Intermediate Temperature Solid Oxide Fuel Cell (IT-SOFC)

    … without any high temperature reduction. GDC electrolyte supported cell was fabricated with Sr0.2Na0.8Nb0.9V0.1O3 and the performance was measured in hydrogen and methane respectively. Due to vanadium’s intrinsic problems, the anode supported cell is not easy. Fe doped double perovskite …

    maryland Repository record for Ceramic Materials Development for Intermediate Temperature Solid Oxide Fuel Cell (IT-SOFC) (opens in a new tab)

  12. Engineering of low-dimensional nanostructures with flame-spray-pyrolysis for photophysical and catalytic technologies

    … 2D film architectures were synthesized as electrolyte-supported cells (ESCs) to characterize their performance in solid-oxide electrolysis cell (SOEC) operation, while simultaneously establishing a strategic framework for optimizing interfacial adhesion and mechanical durability. By …

    greece Repository record for Engineering of low-dimensional nanostructures with flame-spray-pyrolysis for photophysical and catalytic technologies (opens in a new tab)

  13. Development of electrode materials with matched thermal expansion for solid oxide fuel cells

    … oxide is slightly higher than the TECs of common electrolyte materials. Unlike the conventional Ni - electrolyte cermet anode, the oxide anode exhibits high redox phase stability without irreversible performance degradation during a reduction and oxidation (redox) cycle. The performance is …

    texas Repository record for Development of electrode materials with matched thermal expansion for solid oxide fuel cells (opens in a new tab)

  14. A Portable Generator Incorporating Mini-Tubular Solid Oxide Fuel Cells

    … the power output. Maximum power density from an electrolyte supported MT-SOFC was 140 mW/cm2. The partial oxidation reactor (POR) developed provided the required heat to maintain the MT-SOFCs at an operating temperature suitable for generating electricity. The exhaust gas from the POR was a …

    waikato-masters Repository record for A Portable Generator Incorporating Mini-Tubular Solid Oxide Fuel Cells (opens in a new tab) Download file for A Portable Generator Incorporating Mini-Tubular Solid Oxide Fuel Cells (opens in a new tab)

  15. Investigation of Coal Syngas Impurity Tolerance of Alternative Cermet SOFC Anodes

    … with a GDC barrier layer between the anode and electrolyte for evaluation in H2S-laden H2 and coal derived synthesized gas (syngas). Additionally, a novel Sr2MgMoO6-delta/GDC anode (both electrolyte supported and anode supported) is developed for testing in fuels containing both H2S and PH3. The …

    wvu Repository record for Investigation of Coal Syngas Impurity Tolerance of Alternative Cermet SOFC Anodes (opens in a new tab)

  16. CARBONATE-SUPERSTRUCTURED SOLID FUEL CELLS WITH HYDROCARBON FUELS

    … enhances the oxygen ionic conductivity of solid electrolyte by 20-fold (from 3.5×10–3 to 7.3×10–2 S cm– 1), resulting in a six-fold increase in peak power density (PPD), reaching 215 mW cm–2 with dry methane fuel at 550 oC, surpassing all reported values of electrolyte-supported SOFCs. …

    mtu Repository record for CARBONATE-SUPERSTRUCTURED SOLID FUEL CELLS WITH HYDROCARBON FUELS (opens in a new tab)

  17. Preparation of Carbon-tolerant Solid Oxide Fuel Cell Anodes for Direct Utilization of CH4 using Microwave Irradiation

    … Cu nanoparticles on the Ni/YSZ anode of an electrolyte-supported SOFC. The advantage of using the microwave irradiation method is the reduced time required for anode preparation. The irradiation times are on the order of seconds in comparison to impregnation that usually requires multiple …

    calgary Repository record for Preparation of Carbon-tolerant Solid Oxide Fuel Cell Anodes for Direct Utilization of CH4 using Microwave Irradiation (opens in a new tab)

  18. Influence of Radical Proximity on the Charge Transport of Nitroxide-Based Electronics

    … charge storage and transport capabilities in electrolyte-supported systems (e.g., secondary batteries) and have since been a source of inquiry for solid-state applications. Initial studies of their solid-state properties have established the conductivity of these amorphous materials to be on …

    purdue-thes Repository record for Influence of Radical Proximity on the Charge Transport of Nitroxide-Based Electronics (opens in a new tab)

  19. Material Synthesis and Fabrication Method Development for Intermediate Temperature Solid Oxide Fuel Cells

    … substantial increases of ohmic resistance of electrolyte and polarization resistance of electrodes. This dissertation aimed at developing high-performance intermediate-temperature SOFCs through the employment of a series of layered perovskite oxides as novel cathode materials to minimize the …

    south-carolina Repository record for Material Synthesis and Fabrication Method Development for Intermediate Temperature Solid Oxide Fuel Cells (opens in a new tab)

  20. Development of perovskite oxides as printable solid oxide cell electrodes

    … printing and direct-ink-writing. Fabrication of electrolyte-supported solid oxide cells was conducted with different designs to explore the extend of applicability of the printing methods. First, a simple symmetrical cell design was used, with the different perovskite oxides deposited as single …

    greece Repository record for Development of perovskite oxides as printable solid oxide cell electrodes (opens in a new tab)

Page 1 of 2