Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 142 for “"electromagnet"”.
-
Design and construction of a laboratory electromagnet
Thesis (Ph. D.)--Michigan State College of Agriculture and Applied Science. Dept. of Physics, 1950
-
Design, construction and stabilisation of a large electromagnet
A seven and one half ton electromagnet has been built primarily for beam analysis in conjunction with the University of British Columbia electrostatic generator. With a current of 49 amperes, a field in excess of 19,900 gauss over an area of 256 square inches has been obtained across a one inch air …
-
Analysis of the Modified Square Toroid, A Force-Reduced Electromagnet
Made available in DSpace on 2017-07-06T18:48:28Z (GMT). No. of bitstreams: 3 Hill_James_L_MS.pdf: 59446779 bytes, checksum: 6f9a388bc7f966f031ed23df5e3dc80b (MD5) Hill_James_L_MS_ABS.pdf: 903512 bytes, checksum: d0f38e70bbe02fa291766b009006202e (MD5) license.txt: 4813 bytes, checksum: …
-
The design and construction of a powerful electromagnet, and its application to magnetic measurements of the alloy Mn[60]A1[20]C[20]
An electromagnet capable of producing a magnetic field intensity of greater than 21,600 gauss in a gap of one inch and over an area of 3.14 square inches has been designed and constructed. The structure of the ternary alloy of approximate composition Mn₆ₒAl₂ₒC₂ₒ has been investigated by X-ray …
-
Magnetic Rendering: Magnetic Field Control for Haptic Interaction
… an intuitive haptic display method applying an electromagnet array to produce a magnetic field in mid-air where the force field can be felt as magnetic repulsive force exerted on the hand through the attached magnet discs. The magnetic field is generated by a specifically designed electromagnet …
-
Accurate modelling and positioning of a magnetically-controlled catheter tip
… catheter in the human heart using a variable electromagnetically induced field to control a catheter tip equipped with three tiny fixed magnets oriented in XYZ planes. Here we demonstrate a comprehensive mathematical model which accurately calculates the magnetic field generated by the …
-
Magnetic Field Assisted Abrasive Polishing
… parts to impart rotating motion to either the electromagnet or the workpiece. The system works on the principle of generating Rotating Magnetic Fields (RMF) to manipulate the motion of Magnetic Abrasive Particles (MAPs) on the surface of a workpiece for material removal in the form of micro and …
-
The design and testing of an electromagnetic anti-lock brake system with microprocessor control
… thesis involves the design and testing of an electromagnetic antilock brake system. This system is designed as a replacement for the current anti-lock brake systems used on drum brakes. The primary difference in the two systems is the replacement of the pressure modulator that is currently …
-
Harvesting electrical energy from a stationary bike : an experimental approach : a thesis presented in partial fulfillment of the requirements for the degree of Master of Engineering in Electronics and Computer Systems Engineering, School of Engineering and Advanced Technology, Massey University, Palmerston North, New Zealand
… to harvest energy with the use of magnets and an electromagnet. The aim was to create a device that would not require modifications to be made to a standard stationary bike, thus making it affordable and easy to use. A prototype of a stationary bike was designed using SolidWorks and experiments …
-
Elektromagneto šerdies konstrukcijos įtakos levitacijos dinamikai tyrimas /
… a levitation bench has been constructed using an electromagnet, a Holo-effect based distance meter and a feedback system based on a PID algorithm. In this work, an attempt has been made to optimize the performance of a previously constructed magnetic levitation experimental bench. During the work, …
-
Stimulated emission by relativistic electrons traversing a periodic magnetic field.
… of operation of the FEL is discussed. The use of electromagnets to generate a static periodic magnetic field of alternating polarity (as a pump wave source) is proposed. Preliminary measurements with respect to the proposed electromagnet design are analyzed.
-
Shading coils for alternating current electromagnets
… in reducing noise in an alternating current electromagnet as those which are smaller and thus have a greater value of resistance. This occurs because in addition to obtaining the greatest shift possible between flux produced by the unshaded and shaded portions of the pole the magnitudes of …
-
Some aspects of wind tunnel magnetic suspension systems with special application at large physical scales
… of wind tunnels and advances in superconducting electromagnet technology have greatly reduced the apparent cost of a large, or perhaps more specifically, high Reynolds Number MSBS (LMSBS). Many difficulties remain, however, and three are addressed in this thesis.<br/>A powerful method of magnetic …
-
Use of the IGBT Module in the Active Region to Design a High Current Active Filter
… of the associated electrical current in the electromagnet that generates these fields should be smaller than 100ppm. However, conventional switching power supplies cannot offer this precision due to the frequency limitation of the switches. This research considers the use of power electronics …
-
A low-field nuclear magnetic resonance force microscope using liquid samples at room temperature
… and used to study 1H resonance in a low-field electromagnet at room temperature. Tests were carried out sweeping RF frequency and magnetic field, confirming 1H resonance response.
-
Power Generation and Control of Mechatronics Systems - Theory and Test
… as an automotive industry application. An electromagnet excited masspendulum system with attached spring and damper elements is introduced as an undergraduate/graduate engineering experiment. This laboratory offers mechanical, electrical, and control engineering challenges to the students. …
-
A Novel Semi-Active Control Approach for Flexible Structures: Vibration Control through Boundary Conditioning using Magnetorheological Elastomers
… partially due to the weight of the integrated electromagnet having to be mounted onto these vibrating structures in order to activate the MRE layer. This research explores an alternative method of vibration control of flexible beam type structures via boundary conditioning using MRE at the …
-
Montagem e construção de um magnetômetro a efeito Kerr magneto-óptico
… of of this department. In this work a cooled electromagnet was also built the water and that it reaches close values to 10kOe with a gap of 22 mm including an area of uniform field of 25mm of diameter. The first chapter treats of the construction of this electromagnet from its dimensioning to …
-
Modeling, Analysis and Testing of a Semi-Active Control System for Landing Gear Applications
… for this project used an externally mounted electromagnet located between the damper and remote reservoir, as opposed to an electromagnet located internal to the damper body. This design allows landing gear to use semi-active MR dampers with few modifications to existing designs. A set of …
Page 1 of 8