Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 49 for “"electron back scatter diffraction"”.
-
Crystalline Phase Change in Steel Alloys due to High Speed Impact
… result in a phase change of the A36. Scanning electron microscopy, electron back-scatter diffraction, and x-ray diffraction methods were used to investigate deformation, lattice defects, twinning, and phase transformation. A limited number of impacted targets made from 304L and HY100 steels …
-
Characterization of Structures and Deformation in the Brittle-Ductile Transition, Western Termination of the Chugach Metamorphic Complex, Southern Alaska
… brittle fault with 90km of dextral offset. Electron Back Scatter Diffraction (EBSD) and microstructural observations revealed deformation mechanisms were primarily compositionally controlled, whereas P-T-t conditions played a secondary role. Other factors, deemed to be of lesser influence …
-
Development and Characterization of Magnetostrictive GaFe and Plasmonic Gold Thin Films
… advanced characterization processes using Electron Back Scatter Diffraction (EBSD) were also developed to analyze thin film crystal structure and its role in NFT stability. These results will further progress in the fields of MEMS and HAMR as well as provide the basis for identifying and …
-
Application of macroscopic elasticity models to predict microstructurally small crack growth
… microstructure could be found. Fractography and Electron Back Scatter Diffraction (EBSD) were conducted on all three alloys. In addition to the experimental aspects of this study, two linear elastic fracture mechanics models were implemented to see if the trends in crack growth rate could be …
-
Anisotropy of strength and fracture behavior in Al-Mg-Si-(Mn) extrusion alloys
… crystallographic texture was done using scanning electron microscopy and electron back scatter diffraction. The mechanical anisotropy was measured by tensile and VDA bend testing conducted at 0, 45 and 90o to the extrusion direction. The characterization analysis shows presence of crystallographic …
-
Nonlinear ultrasonic technique for the characterization of microstructure in additive materials
… necessary dislocations (GND) are measured from electron back scatter diffraction (EBSD) as a quantitative indicator of dislocations. Average GND density and β are found to have a statistical correlation coefficient of 0.852 showing sensitivity of β to dislocations in AM metals.
-
Experimental study of the effects of annealing time, equilibrium angle, and absolute misorientation angle on thermal grain-boundary grooving in cube-textured nickel
… at triple point junctions were measured using electron back-scatter diffraction, and the cube-texture of the samples was analyzed with x ray diffraction. Grain size measurements were also made on each sample.The linear dimensions of grooves evolved with annealing time in accordance withMullins’ …
-
Heat Transfer Aspects of Two Piston Splat Quenching
… created 10 scenarios, which were examined using, backscatter imaging, secondary imaging, and electron back scatter diffraction. Cooling rates were estimated using cell sizing obtained through electrolytic etching and secondary imaging. This thesis determined that both surface modification and …
-
Process-Structure-Property Relationships in Laser Powder Bed Fusion Produced 17-4 PH Steel
… and characterized using optical microscopy, electron back scatter diffraction (EBSD), and X-ray diffraction (XRD) to quantify phase evolution. Tensile testing was performed to directly link heat treatment pathway and nitrogen absorption to mechanical performance. This work demonstrates where …
-
Characterization and modeling of high burn-up mixed oxide fuel
… burn-ups. Optical metallography, transmission electron microscopy and electron back-scatter diffraction were performed to further study the microstructure and chemical composition of the irradiated fuel. The optical micrographs were used to generate finite-element meshes in order to model the …
-
Linkage between mechanical properties and phase transformations in a 301LN austenitic stainless steel
… after deformation were investigated using electron back-scatter diffraction, energy-dispersive X-ray spectroscopy and transmission electron microscopy. It was found that the grain size refinement was responsible of a change in nucleation mechanisms of α’-martensite, thereby affecting the …
-
Residual Stress Mitigation via Martensitic Formation in Steels through Cryogenic Temperature Exposure Modelling a Lunar Environment
… the residual stress profiles using neutron beam diffraction both before, during and after cryogenic cooling. Similar investigations were conducted using X-ray diffraction on AM steel samples. The samples microstructures were subsequently characterised using electron back scatter diffraction and …
-
Investigation of the Phase Transformation Kinetics and Texture Evolution in a TRIP Steel under Complex Loads
… followed by torsion. Synchrotron x-ray and electron back-scatter diffraction techniques were used to investigate the phase transformation-microstructure-texture evolutions relations.</p> <p>Under torsional deformation, the inhomogeneous distribution of martensite phase fractions were …
-
Grain refinement in dual phase steels
… Microstructures were characterized by scanning electron microscopy (SEM) including electron back scatter diffraction (EBSD) mapping. For the investigated steels the highest amount of deformation with a true strain of 0.6 or above resulted in optimized microstructures consisting of 70-80% …
-
Laser metal deposition of the Ti-5553 alloy on forged substrate for aerospace applications
… been investigated using optical and scanning electron microscopy, as well as with electron back-scatter diffraction and energy dispersive spectroscopy. Residual stresses have been evaluated using the multiple-axis contour method. Microhardness and tensile properties have been evaluated and …
-
Effect of Strain Rate on the Tensile Behavior of CoCrFeNi and CoCrFeMnNi High Entropy Alloys
… microstructural phenomena driving the behaviors. Electron back-scatter diffraction was performed on both HEAs to study the microstructure before mechanical testing. To study the effect of strain rate, tensile experiments were performed at quasi-static strain rates on hydraulic MTS load frames and …
-
Selective laser melting of nickel superalloys for aerospace applications: defect analysis and material property optimisation
… mechanical properties can be improved. Scanning electron microscopy (SEM), electron back scatter diffraction (EBSD), and X-ray powder diffraction (XRD) were used to reveal the microstructure evolution through processing stages. Mechanical tests (i.e., tensile strength, indentation hardness) were …
-
Understanding the effect of aluminium on the microstructure on low level nitrogen steel
… aluminium contents (0.02, 0.48 and 0.94 wt%). Electron back scatter diffraction (EBSD) was employed to study the effect of excess aluminium (apart from aluminium nitride) on the final ferritic microstructure. In order to have a better understanding in relation to the role of excess aluminium in …
-
Towards local property assessment of advanced manufactured microstructures: a case study in linear friction welded titanium
… through correlated nano-indentation mapping and Electron Back Scatter Diffraction (EBSD), providing rapid structure property assessments.</p> <p>Local fatigue properties are explored with a Bayesian Optimised data collection protocol and novel meso-scale ultrasonic fatigue test, permitting the …
Page 1 of 3