Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 43 for “"electronic load"”.
-
Digitally Controlled, Modular Electronic Load
… development of a digitally controlled, modular electronic load. The proposed load is unique from existing designs because it has the added ability to increase its maximum current level by adding identical modules in parallel. Each module is designed to sink a maximum of 5A at 60V but more …
-
Small electronic load. Design and analysis of a small electronic load for testing on-board DC/DC converters
Electronic loads are used at Ericsson AB for test and verification of on-board DC/DC converters. The problem with the existing electronic loads is that they require cables to connect to the board due to their dimensions. Cables will introduce inductance in the load current path and affect the …
-
A DSP based AC electronic load for unintentional islanding tests
… islanding test. In this study, a single phase AC electronic load is introduced to simulate the local loads under unintentional islanding conditions. This thesis proposes a proper schematic of the electronic loads based on the H-bridge dc-dc converter and analyzes the performance of this system …
-
Modeling and Control of a Synchronous Generator With Electronic Load
… synchronous generator that supplies an active dc load (inverter) through a three-phase diode rectifier requires adequate modeling in both time and frequency domain. In particular, the system's control-loops, responsible for stability and proper impedance matching between generator and load, are …
-
Battery cycling station : programmable electronic load in a charging station
… on an in-house charging station by adding an electronic load, enabling repeated charge/discharge cycles with defined current profiles. After prototyping, the design uses a DAC and op-amp voltage followers to drive MOSFET gates. The completed station runs a state-machine controller that …
-
Towards an Updated Electronic Load Controller for Microhydro Systems in Rural Nepal
… for 7500 deaths/year in Nepal (WHO 2007). Electronic load controllers (ELCs), which are intended to improve the longevity of microhydro systems by diverting surplus power into a dump load to regulate voltage and frequency, have been documented as one of the most common microhydro components …
-
Single-phase nonlinear power electronic loads: modeling and impact on power system transient response and stability
… examines single-phase nonlinear power electronic loads. The transient response of power electronic loads is unlike traditional linear loads. Therefore, a composite power electronic transient load model is developed. The load model dynamics are validated with actual utility voltage sag …
-
Integration of Photovoltaics with Micro-hydro Power Systems
… versus variations in photovoltaic output and load variability, for governor controlled and electronic load controlled hydro systems. The stochastic nature of solar irradiance changes the photovoltaic power. In a photovoltaic-hydro system, the change in active power results in a change in speed …
-
Applications of Power Electronics for Renewable Energy
… systems, it is possible to control the loading on the generator by electronic means. However, the switching nature of the power electronics introduces undesired harmonics and causes stress in the generator. Hence, a new electronic load controller topology is proposed to reduce the level …
-
Low-cost power generating technology for small-scale stand-alone applications.
… VAr source for voltage regulation, and an electronic load governor. The thrust of this work is towards the reduction of cost by replacing the more conventional synchronous generator by an induction machine and, by eliminating the site-specific fully-governed turbine. An electronic load …
-
A GaN-Based Synchronous Rectifier with Reduced Voltage Distortion for 6.78 MHz Wireless Power Applications
… is explained. Challenges in WPT such as dynamic load variation and electromagnetic interference due to harmonic distortion are discussed, and a literature review is conducted to convey how the current state of the art is addressing these challenges.A GaN-based synchronous rectifier is proposed as …
-
Modelling of pile load tests in weak rock
… of this thesis was to investigate the loss of load capacity of relaxed pile groups driven into weak bedrock. This was accomplished in the laboratory using a dynamic driving apparatus equipped with a static load testing system. The static load testing system applied loads hydraulically, and the …
-
Methods to ensure the adequate primary frequency response of low inertia power systems
… generation, lightweight gas turbines, and electronic load has resulted in systems with lower inertia and reduced governor response. The expected continuation of this decline motivates research on economical methods to ensure primary frequency response (PFR) adequacy and prevent …
-
Analysis And Simulation Tools For Solar Array Power Systems
… I-V characteristics, and also by using an electronic load. Experimental results are presented.
-
Design and comparison of a small, monolithic weighing lysimeter to a large lysimeter and to the penman and penman-monteith equations
… device is comprised of an aluminum frame and an electronic load cell that only weighs the “live load” or change in water content of the lysimeter. This is made possible by counterweighting the “dead load” or dry soil and container. It was designed to be easily installed in a single circular pit …
-
Application of Supercapacitor in Elecrical Energy Storage
… with the supercapacitor to achieve peak load shaving as well as Uninterruptible Power Supply (UPS) functionalities. Due to the need to operate in both buck-boost and boost modes, a tri-state hybrid mode was proposed to bridge the buck-boost and boost modes. It was proven experimentally …
-
Real-Time Power Management of A Fuel Cell/Ultracapacitor Hybrid
… objectives are to respond to rapid variations in load while minimizing damaging fluctuations in fuel cell current and maintaining ultracapacitor charge (or voltage) within allowable bounds. An experimental test stand was created to evaluate the performance of the controllers. The test stand …
-
DC/DC PMBus Compliance Tester
… controls an oscilloscope, a power supply and an electronic load. Each script command is implemented as a separate sub-program and a main program calls the sub-program when the corresponding script command is identified by a parser. This approach makes it possible to substitute an instrument …
-
Συλλογή και μετατροπή ακουστικής ενέργειας με έμφαση σε χαμηλές συχνότητες
… a rechargeable battery or for driving an electronic load, while the electric power delivered to a load resistance may be up to units of mW. These results presented in this work are discussed in detail and the framework for future work and applications is presented.
-
Composite load modeling for power systems: Model reduction, identification, and application to conservation voltage reduction
Load modeling is essential to power system stability analysis, optimization, and controller design as shown in many research. Although the importance of load modeling is recognized by power system researchers and engineers, obtaining an accurate load model remains challenging due to the large …
Page 1 of 3