Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 1448 for “"elevated temperature"”.
-
Elevated Temperature Fatigue for AISI 4340 Steel
… however, little research has been conducted for elevated temperature fatigue life of steel alloys used in large caliber cannon tubes. Data gathered from stress and temperature testing on AISI 4340 steel was used to develop an elevated temperature fatigue prediction model for AISI 4340 steel. The …
-
Elevated temperature effects on interface shear behavior
Environmental conditions such as temperature inevitably impact the long term performance, strength and deformation characteristics of most materials in infrastructure applications. The mechanical and durability properties of geosynthetic materials are strongly temperature dependent. The interfaces …
-
Metal Fatigue With Elevated Temperature Rest Periods
Made available in DSpace on 2014-12-10T17:25:47Z (GMT). No. of bitstreams: 1 6910839.pdf: 1454859 bytes, checksum: 45e91d4b6597f6ef353f7c41bed3fc78 (MD5) Previous issue date: 1968
-
Tribology of PTFE/PEEK Composite at Elevated Temperature
… chemical resistance, thermal stability, and high-temperature mechanical strength. Despite these attractive properties, a critical concern of the PEEK polymer in tribological applications is its high friction, which could lead to serious problems, such as high local flash temperature and severe …
-
Tensile behaviour of alpha brasses at elevated temperature
… brasses has been studied in the homologous temperature range of 0.4 to 0.9 and at strain rates of 10⁻⁴ and 10⁻²s⁻¹. Discontinuous yielding was observed at the lower strain rate, but only at temperatures up to 0.45 T[sub m]. In the full range of 0.4 to 0.6 T[sub m], there was a high rate of …
-
Incinerator Ash Characterization - Implications for Elevated Temperature Landfills
The occurrence of temperatures in municipal solid waste (MSW) landfill gas (LFG) extraction systems in excess of 55°C is a problem that has gained much attention in the solid waste industry, both domestically and globally. Facilities which frequently experience such temperatures are termed Elevated …
-
Formability of Aluminum Alloy Sheet at Elevated Temperature
… limit curves (FLCs) were developed at several temperature levels (room temperature, 100ºC, 200ºC, 250ºC, and 300ºC) and strain-rates (0.003, 0.018, and 0.1s-1). The formability experiments demonstrated that temperature has a significant effect on formability, whereas forming speed has a mild …
-
Elevated temperature measurements during a hypervelocity impact process
… measured for two different wavelengths and the temperature of the ejecta cloud was found assuming black body emission. Experimental results were compared against one dimensional predictions based on equilibrium thermodynamics. A mie-Gruneisen equation of state was assumed for the glass target. …
-
Electrical Behavior of Lead Telluride at Elevated Temperature
… of native defects, ks, of lead telluride at elevated temperature still exists. This research study was carried out to measure the electrical conductivity and Hall coefficient from which these intrinsic parameters (ni, z, ks) at high temperatures can be determined. Hence, a more accurate …
-
Elevated temperature mechanical properties of line pipe steels
The effects of test temperature on the tensile properties of four line pipe steels were evaluated. The four materials include a ferrite-pearlite line pipe steel with a yield strength specification of 359 MPa (52 ksi) and three 485 MPa (70 ksi) yield strength acicular ferrite line pipe steels. …
-
Elevated temperature mechanical properties of line pipe steels
The effects of deformation temperature near the dynamic strain aging (DSA) regime on the tensile properties of X70 and X52 line pipe steels were evaluated. Testing temperatures of interest were in the range of 25 to 350 °C, at engineering strain rates in the range of approximately 10 4 to 10 3 s 1. …
-
Durability of polymeric composites after elevated temperature aging
… strength of polymeric composites after long term elevated temperature aging is studied. Aging temperatures range from 149$\sp\circ$C to 204$\sp\circ$C (300$\sp\circ$F to 400$\sp\circ$F). Two types of matrix material are studied, a thermoset bismaleimide (5260) and a thermoplastic polyimide (K3B). …
-
Reactions between refractory metals and silica at elevated temperature
… conditions. The oxides found at room temperature were respectively VO₀․₉, Nb₂O₅, Ta₂O₅ and MoO₉. X-Ray data showed that tantalum - silica interface contained other species that could be silicon, silica, sub-oxides, silicides and crystallised silicates.
-
Elevated Temperature Formability of Precipitation Hardenable Sheet Aluminum Alloys
This thesis investigates the elevated temperature forming behavior of two age-hardenable aluminum alloys, AA6013 and a developmental 7000-series alloy (denoted AA7xxx), intended for automotive applications. Warm (150°C - 250°C) and hot (>=300°C) forming conditions were considered as well as a range …
-
Stress-relaxation of cross-linked polyethylene at elevated temperature
… a thermoplastic, it also deforms and flows when temperatures approach or exceed the crystalline melting point. This handicap, however, can be reduced by crosslinking the polymer chains and thereby converting the thermoplastic to a thermoset material. To further expand the possible uses of this …
-
Effect of elevated temperature on efficiency of corrosion inhibitors
… program was set up to investigate the effect of temperature on the protection efficiency of various inhibitors of metal corrosion. Contrary to most studies, an appreciable amount of the work was done with the corrosive effect being determined on the metal specimens that were exposed first to the …
Page 1 of 73