Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 2591 for “"elevated temperatures"”.

  1. Magnetization Dynamics at Elevated Temperatures

    … that govern the demagnetization at arbitrary temperatures.To address the question of magnetization reversal at high temperatures, the conventional Landau-Lifshitz equation is obviously unsatisfactory, since it fails to describe the longitudinal relaxation. So by using the equation of motion …

    arizona-thes Repository record for Magnetization Dynamics at Elevated Temperatures (opens in a new tab)

  2. Elevated temperatures in waste containment facilities

    … facilities. A number of factors can lead to elevated temperatures and thus present a hazard to the public health and safety. For instance, MSW landfills can produce obnoxious odors, toxic gases, and aggressive leachates. In addition, they can damage gas extraction, leachate collection, …

    uiuc Repository record for Elevated temperatures in waste containment facilities (opens in a new tab)

  3. Phonons in Copper at Elevated Temperatures

    <p>The technique of inelastic scattering of thermal neutrons offers a versatile, yet powerful, method of observing the spectra of elementary excitations in condensed matter. In this thesis, this technique was used in the determination of the phonon spectra of three metals, using monocrystalline …

    mcmaster Repository record for Phonons in Copper at Elevated Temperatures (opens in a new tab)

  4. Characterization of Florida Landfills with Elevated Temperatures

    The occurrence of elevated temperatures within landfills is a very challenging issue for landfill operators to detect and correct. Little is known regarding the causes of elevated temperatures (ETs) and the number of landfills currently operating under such conditions. Therefore, the goal of this …

    ucf Repository record for Characterization of Florida Landfills with Elevated Temperatures (opens in a new tab)

  5. Dynamic characteristics of metals under elevated temperatures

    … where it may be subject to dynamic loads under elevated temperatures. This thesis attempts to experimentally identify properties of the three above mentioned metals at elevated temperature [70°F--350°F] and under different strain rates [10-4--10 2 sec-1]; The thesis will investigate the …

    unlv Repository record for Dynamic characteristics of metals under elevated temperatures (opens in a new tab) Download PDF for Dynamic characteristics of metals under elevated temperatures (opens in a new tab)

  6. Dielectric Behavior of Rutile at Elevated Temperatures

    … properties of rutile (Ti02) were investigated at elevated temperatures using a new measurement technique. The temperature and frequency trends of the data were then compared with existing theory. Various polarization mode ls were employed to flt the empirical behavior.

    marquette Repository record for Dielectric Behavior of Rutile at Elevated Temperatures (opens in a new tab)

  7. Performance of Geopolymer Concrete at Elevated Temperatures

    … not all of its behavioural aspects at high temperatures have been investigated. The aim of this research therefore is to investigate the deformational behaviour of GPC concrete under varying stress-temperature histories as well as at-temperature and residual strength properties. …

    unsw Repository record for Performance of Geopolymer Concrete at Elevated Temperatures (opens in a new tab)

  8. Micro-Fabricated Hydrogen Sensors Operating at Elevated Temperatures

    … silicon wafers, aiming to detect hydrogen gas at elevated temperatures. Based on the material properties and sensing mechanisms, they were operated at 140°C, 500°C, and 300°C. The MOS-capacitor device working at 140°C utilized nickel instead of the widely-used expensive palladium, and the …

    uky-thes Repository record for Micro-Fabricated Hydrogen Sensors Operating at Elevated Temperatures (opens in a new tab)

  9. NMR relaxation in crude oils at elevated temperatures

    … the crude oil relaxation response at reservoir temperatures is needed for optimal interpretation of log data. This work used a Can-Purcell-Meiboom-Gill (CPMG) pulse sequence to measure the NMR T2 relaxation at 2 MHz. Four stock tank crude oils were studied over the temperature range 30-100°C at …

    ttu Repository record for NMR relaxation in crude oils at elevated temperatures (opens in a new tab)

  10. Vapor-liquid equilibria at elevated temperatures and pressures

    … and Lacey for phase equilibrium measurements at elevated temperatures and pressures has been designed and built. Assembly and detail drawings of the apparatus, and a detailed description for its use have been included. The vapor pressure of methanol has been measured at temperatures from 100°C to …

    ubc Repository record for Vapor-liquid equilibria at elevated temperatures and pressures (opens in a new tab) Download PDF for Vapor-liquid equilibria at elevated temperatures and pressures (opens in a new tab)

  11. Diffusion in Fe-Mg olivine at elevated temperatures

    … unsuccessful. It is theoretically shown that at temperatures greater than one-half of the melting temperature the diffusion coefficient of Mg in olivine silicate is an exponential function of temperature and pressure. [formula omitted] The results also indicate that at T > .5Tm and at …

    ubc Repository record for Diffusion in Fe-Mg olivine at elevated temperatures (opens in a new tab) Download PDF for Diffusion in Fe-Mg olivine at elevated temperatures (opens in a new tab)

  12. Crystal chemistry of the Olivines at elevated temperatures

    Single crystal x-ray intensity data have been collected with a manual diffractometer utilizing flat-cone geometry for Ni-olivine, Ni₂SiO₄, (25°, 300°, 600° and 900°C), monticellite, Ca₁.₀₀Mg₀.₉₃Fe₀.₀₇SiO₄, (25°, 335°, 615° and 795°C) and giaucochroite, Ca₀.₉₈Mn₀.₈₇Mg₀.₁₀Zn₀.₀₅SiO₄ (25°, 300°, 600° …

    ubc Repository record for Crystal chemistry of the Olivines at elevated temperatures (opens in a new tab) Download PDF for Crystal chemistry of the Olivines at elevated temperatures (opens in a new tab)

  13. The mechanics of drawing wire at elevated temperatures

    Although elevated temperature drawing of wire has been an industrial process for a number of years it has not been investigated systematically and many facets of the process have not been understood. Consequently a continuous in-line heat treatment draw process was developed. The technique of …

    aston Download PDF for The mechanics of drawing wire at elevated temperatures (opens in a new tab)

  14. Wear of Low Alloy Steels at Elevated Temperatures

    … low alloy steels at various loads and at disc temperatures ranging from room temperature to 500°C. Wear rate, frictional force and temperatures of the pin and disc were continuously monitored during each test. The wear debris and worn samples were examined using x-ray diffraction techniques for …

    aston Repository record for Wear of Low Alloy Steels at Elevated Temperatures (opens in a new tab) Download PDF for Wear of Low Alloy Steels at Elevated Temperatures (opens in a new tab)

  15. The lubricating properties of graphite at elevated temperatures

    The wear rate and the magnitude of friction of commercially available graphites in air have been shown to be dependent on the corrosion resistance of the graphite. In air the wear rate of graphite was observed to increase with increasing temperature up to 6000 C. A very rapid type of wear was found …

    salford

  16. Impact of elevated temperatures on soil tensile strength

    … involve unsaturated soils subjected to elevated temperatures (e.g., earthen structure-atmospheric interaction under prolonged droughts, nuclear water disposal, energy piles, ground source heat pumps). While the temperature dependency of desiccation cracking is demonstrated in the …

    oklahoma-thes Repository record for Impact of elevated temperatures on soil tensile strength (opens in a new tab) Restricted access

  17. Thru-thickness bending stress distribution at elevated temperatures

    … bending process (structural). The five different temperatures collected during the thermal analysis were a uniform temperature of 75oF, a 1100oF uniform temperature as a result of furnace heating, both five and ten minutes of air-cooling after the plate had reached a uniform temperature of 1100oF, …

    tamu Repository record for Thru-thickness bending stress distribution at elevated temperatures (opens in a new tab)

Page 1 of 130