Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 109 for “"embossing"”.

  1. Hot embossing of polymeric tubular micro-components

    … have led to the development of a hot embossing process and corresponding machine for shaping polymeric micro-tubes. The targeted tubular micro-components are of an initial outer diameter of 1.6mm or below, and have reduced inner feature in the micron meter ranges. The proposed process …

    strathclyde Repository record for Hot embossing of polymeric tubular micro-components (opens in a new tab)

  2. Constant temperature embossing of supercooled polymer films

    In this dissertation work, a constant temperature embossing process was developed and investigated. By softening and crystallizing a supercooled polymer at the same temperature, the embossing and solidification stages can be carried out isothermally without thermal cycling. The new process was …

    gatech Repository record for Constant temperature embossing of supercooled polymer films (opens in a new tab)

  3. ABAQUS simulation and optimization of PMMA hot embossing process

    … industry has led to increasing attention to hot embossing technology. The hot embossing technology has developed a lot for the past few decades and been proved to be capable to replicate microstructure with high efficiency and high accuracy. This thesis is going to establish a numerical hot …

    uiuc Repository record for ABAQUS simulation and optimization of PMMA hot embossing process (opens in a new tab)

  4. Simulation of Polymer Imprinting and Embossing using Smoothed Dissipative Particle Dynamics

    … showing good agreement with analytical results. Embossing simulations under different settings were then conducted using SDPD. Cavity filling modes and their dependence on die parameters is demonstrated for single and multi-cavity die. Within a single cavity die, we see a transition of flow peak …

    gatech Repository record for Simulation of Polymer Imprinting and Embossing using Smoothed Dissipative Particle Dynamics (opens in a new tab)

  5. Design, Fabrication, and Testing of a PDMS-Based Nanochannel Using Nano Embossing

    … (PDMS) based nanochannel using nano-embossing. Work was performed to establish a fabrication process flow that delivers consistent and robust nanochannels. A step-by-step fabrication protocol was developed, and the nanochannels were fluid tested to assess flow capabilities. Key …

    arkansas Repository record for Design, Fabrication, and Testing of a PDMS-Based Nanochannel Using Nano Embossing (opens in a new tab)

  6. Study of Polymer Flow Behavior in Cavity Filling of Alignment Structures in Micro Hot Embossing

    … polymer flow is a critical aspect in micro hot embossing. The flow behavior significantly depends on the process parameters including molding temperatures and displacement of a mold with respect to a polymer substrate. To achieve accurate replication of microstructures, it is necessary to …

    texas-state Repository record for Study of Polymer Flow Behavior in Cavity Filling of Alignment Structures in Micro Hot Embossing (opens in a new tab)

  7. Design of a Mold Insert Alignment System for Double-Sided Hot Embossing of Microfluidic Devices Using Kinematic Constraints

    The fabrication of microfluidic devices using hot embossing has increased in complexity. Many systems are multi component systems requiring that each be aligned properly with its mating components. Double-sided hot embossing is often used to produce stackable components for these assemblies. …

    texas-state Repository record for Design of a Mold Insert Alignment System for Double-Sided Hot Embossing of Microfluidic Devices Using Kinematic Constraints (opens in a new tab)

  8. Rapid production of polymer microstructures

    … research is to develop an integrated polymer embossing module, with which difficult-to-emboss polymer microstructures and microparts can be fabricated in a cost-effective manner. In particular, the research addresses three major limitations of the hot embossing process, namely, long cycle …

    gatech Repository record for Rapid production of polymer microstructures (opens in a new tab)

  9. Many Strange Visual Effects can be Obtained by Overlapping Several Objects Containing both Raised and Incised Shapes and Varying the Textures of these Forms

    … study deals with the printmaking technique of embossing to create visual effects with "non-associative" forms. The prints presented deal with the realm of space and an atmosphere unrelated to our present environment or concepts of gravity. Several visual conflicts were achieved by overlapping …

    central-wash Repository record for Many Strange Visual Effects can be Obtained by Overlapping Several Objects Containing both Raised and Incised Shapes and Varying the Textures of these Forms (opens in a new tab)

  10. Studies on high power ultrasonic microembossing and organic light emitting diodes (OLEDs) for the creation of lab-on-CD devices for sensor related applications

    … the application of High Power Ultrasonic Microembossing Technology (HPUMT) in producing microfeatures on polymer substrates. The work reviews a novel method of obtaining flash free and precise microfeatures by manipulating the material density through microcellular foaming. The microfeatures …

    iastate Repository record for Studies on high power ultrasonic microembossing and organic light emitting diodes (OLEDs) for the creation of lab-on-CD devices for sensor related applications (opens in a new tab)

  11. Fabrication of Through-Holes for the Interconnection of Polymer Microfluidic Devices

    … into cost effective polymer devices. Hot embossing has been proposed in the fabrication of through-holes. This would allow a fluidic sample to be transferred between multiple interconnected Point-of-Care diagnostics (POCD) systems. The hot embossing process was modified to increase the …

    texas-state Repository record for Fabrication of Through-Holes for the Interconnection of Polymer Microfluidic Devices (opens in a new tab)

  12. Optical characterization of wet chemically derived organic-inorganic hybrid (polyceram) films

    … optical attenuation, UV transmission and surface embossing. Dielectric waveguides of superior optical quality were obtained and Polycerams proved to be surface patternable with near-perfect shape replication abilities. The above properties are discussed in conjunction with a scattering model which …

    arizona-thes Repository record for Optical characterization of wet chemically derived organic-inorganic hybrid (polyceram) films (opens in a new tab)

  13. DEVELOPING METHODS FOR INCORPORATING ANTIMICROBIAL BIOCIDAL NANOPARTICLES IN THERMOPLASTICS

    … material via both melt-compounding and surface embossing. Properties of the thermoplastic composite, such as thermal, rheological, mechanical, flowability, permeability, and leachability, are studied before and after the addition of anti-microbial. A novel methodology of incorporating the …

    msu Repository record for DEVELOPING METHODS FOR INCORPORATING ANTIMICROBIAL BIOCIDAL NANOPARTICLES IN THERMOPLASTICS (opens in a new tab)

  14. The replication of micron scale pillar arrays for medical ultrasound applications

    … remain laboratory based. Viscous polymer (VP) embossing has been demonstrated as a route to smaller feature sizes and higher aspect ratios, but the process is limited by the availability of suitable moulds, which must be replicated to make the process cost effective. This thesis reviews the …

    birmingham Download PDF for The replication of micron scale pillar arrays for medical ultrasound applications (opens in a new tab)

  15. Dinâmica da Plasticidade Sináptica em neurônios do hipocampo durante ciclos de sono: um estudo computacional

    … of synaptic connections, carrying out the embossing of certain mnemonic traces within a lattice of synaptic weights rescaled each night. Such an embossing is understood as the combination of Hebbian and non-Hebbian mechanisms, capable of increasing and decreasing respectively the synaptic …

    brazil-ufrn Repository record for Dinâmica da Plasticidade Sináptica em neurônios do hipocampo durante ciclos de sono: um estudo computacional (opens in a new tab)

  16. Alternative replica molding methods for polymer based microfluidic channels

    … to create circular microfluidic channels via hot embossing and double casting techniques in both thermoplastic materials and PDMS. This hot embossing based method to create round channels allows for the rapid creation of straight and curving round channels in PMMA and other plastics as well as a …

    ubc Repository record for Alternative replica molding methods for polymer based microfluidic channels (opens in a new tab) Download PDF for Alternative replica molding methods for polymer based microfluidic channels (opens in a new tab)

Page 1 of 6