Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 61 for “"end plates"”.

  1. Optimal lifting surfaces, including end plates, ground effect & thickness / David William Fin Standingford.

    The task of calculating the aerodynamic load distribution on a thin three-dimensional lifting surface or wing of finite aspect ratio at small angle of attack presents difficulties for most numerical methods. The two-dimensional lifting-surface integral equation that must be solved is highly …

    adelaide Repository record for Optimal lifting surfaces, including end plates, ground effect & thickness / David William Fin Standingford. (opens in a new tab)

  2. An investigation of the side forces and moments created by end plates with moveable flaps at their trailing edge

    … and unsteady lift disturbances, is a system of end plates with oscillating flaps at their trailing edge. Such a system also has been shown to have application in controlling drag for takeoff and landing, and in providing direct side force control for crosswind landings. A method for calculating …

    ut-knoxville Repository record for An investigation of the side forces and moments created by end plates with moveable flaps at their trailing edge (opens in a new tab)

  3. Targeting the Motor End Plates to Maximise Retrograde Transport into Corresponding Spinal Cord Motor Neurons: An Approach for Neuronal Survival and Axonal Regeneration

    … the exact location of the rodent motor end plate (MEP) region for several forelimb muscles. MEPs are the postsynaptic region of the neuromuscular junction that offers direct access to spinal cord motor neurons. This thesis work revealed that MEPs span the entire length of a muscle, are …

    unsw Repository record for Targeting the Motor End Plates to Maximise Retrograde Transport into Corresponding Spinal Cord Motor Neurons: An Approach for Neuronal Survival and Axonal Regeneration (opens in a new tab)

  4. On some aspects of the aerodynamic performance of ground-effect wings

    … configuration, consisting of a planar wing with end plates, is determined. The results of this theory are in agreement with experiment in predicting that the effect of end plates is to reduce the induced drag. However, the indications of the experiments are that the reduction in induced drag is …

    soton Download PDF for On some aspects of the aerodynamic performance of ground-effect wings (opens in a new tab)

  5. Strength and Stiffness of Weak-Axis Moment End-Plate Connections

    … the strength and stiffness of weak-axis moment end-plate connections. Each test consisted of two girders connected to a column web with four-bolt extended moment end-plates. Two tests were conducted with bare steel. One test included a composite concrete slab that confined the top extension of …

    vt Repository record for Strength and Stiffness of Weak-Axis Moment End-Plate Connections (opens in a new tab)

  6. Experimental verification of finite element analysis for deep denting of cylindrical shells

    … tested with and without 0.5 inch thick welded end plates to study the influence of the addition of end plates on the stress and strain behavior. Pipes were dented in two modes; transverse and longitudinal modes up to dent depths equal to the radius of the pipe in the 12 inch diameter pipes, and …

    unlv Repository record for Experimental verification of finite element analysis for deep denting of cylindrical shells (opens in a new tab) Download PDF for Experimental verification of finite element analysis for deep denting of cylindrical shells (opens in a new tab)

  7. Behaviour of unstiffened column webs in bolted beam-to-column connections in building frames

    From various surveys, steel bolted end plate connections are used widely in construction projects throughout the UK. The most popular connections are flush end plated ones with extended end plated ones just behind in popularity. These connections are chosen over other connections types mainly due …

    abertay Repository record for Behaviour of unstiffened column webs in bolted beam-to-column connections in building frames (opens in a new tab) Download PDF for Behaviour of unstiffened column webs in bolted beam-to-column connections in building frames (opens in a new tab)

  8. Design, Modelling and Control of Electrical Machines - With Applications to Iron-powder Machines and Acoustic Noise

    … claw-pole machine with magnetically conducting end-plates has been analyzed and a prototype tested. The machine is built from soft magnetic composite material (SMC), also known as iron-powder. The magnetic isotropy of SMC gives enormous flexibility in electrical machine design, enabling new …

    lund Repository record for Design, Modelling and Control of Electrical Machines - With Applications to Iron-powder Machines and Acoustic Noise (opens in a new tab) Download PDF for Design, Modelling and Control of Electrical Machines - With Applications to Iron-powder Machines and Acoustic Noise (opens in a new tab)

  9. Fabrication And Testing Of A Cylindrical Ion Trap Microarray For Tunable Mass Spectrometers

    … provide optimal potential to trap ions[1]. The end- plates were designed to optimize the electron and ion transmission into and out of the ion trap and provide a high quality electric field definition within each cylindrical ion trap (CIT)[3]. Two different approaches, namely deep reactive ion …

    usf Repository record for Fabrication And Testing Of A Cylindrical Ion Trap Microarray For Tunable Mass Spectrometers (opens in a new tab)

  10. Investigating Behaviour of Elastomeric Bearings Considering Non-Standard Top and Bottom Boundary Rotations

    … isolation use rigid diaphragms to bound the end plates of the isolators, which is easily implemented in new build scenarios but requires extensive excavation and foundation work in retrofit applications. An alternative form of isolation involves placing the isolation plane on top of first …

    mcmaster Repository record for Investigating Behaviour of Elastomeric Bearings Considering Non-Standard Top and Bottom Boundary Rotations (opens in a new tab)

  11. Investigation of durability and design of direct methanol fuel cells

    … on performance was investigated. Three bipolar/end plates with a single-channel serpentine configuration were fabricated with three different channel widths and experimentally tested the performance. To understand the details of the phenomenon and the fluidic behaviours, a computational fluid …

    calgary Repository record for Investigation of durability and design of direct methanol fuel cells (opens in a new tab)

  12. High strength steel for seismic resistance of beam-to-column connections: novel metal investigation

    … of connections made by HSS, current codes recommend that connections remain in the elastic range. Under seismic events, high demands for local and global deformation are imposed on structural elements, connections and details. Designers should look into strain and deformation of the steel and …

    uiuc Repository record for High strength steel for seismic resistance of beam-to-column connections: novel metal investigation (opens in a new tab)

  13. A new experimental approach of characterizing two-phase flow and heat transfer in plate heat exchangers

    … Since the heat transfer is flow regime dependent, a new experimental approach is developed in this work to characterize the PHEs by simultaneously combining local heat transfer measurement and flow visualization. Single-phase heat transfer is first measured in order to characterize the PHEs …

    uiuc Repository record for A new experimental approach of characterizing two-phase flow and heat transfer in plate heat exchangers (opens in a new tab)

  14. Some Design Criteria for Open-Ended Microwave Cavities

    … techniques used in the construction of open-ended sampling cavities. The approach one may use for aerodynamic improvements of the cavities is discussed, but no conclusions can be drawn about the design's validity since no experimental tests were taken. This paper will describe the design, …

    unm Repository record for Some Design Criteria for Open-Ended Microwave Cavities (opens in a new tab)

  15. Dynamic response of cylindrical shells to underwater end-on explosion

    … nonlinear response of cylindrical shells with end caps. The cylinders were subjected to shocks from explosive charges at 12 inches (near-field) and 28 feet (far-field) from the cylinder. And underwater shock test was also performed with the far-field explosion. The numerical results were …

    nps Repository record for Dynamic response of cylindrical shells to underwater end-on explosion (opens in a new tab)

  16. Modelling the dynamics of fuel bundles

    … the structural response of the fuel rods and end plates, while turbulence excitation is reconstructed from power spectral density data and contact forces are modeled. The effects of sup port clearance on vibration, contact forces, and work rate are investigated to assess fretting-wear …

    guelph Repository record for Modelling the dynamics of fuel bundles (opens in a new tab)

  17. Fiber-optic flexural disk accelerometer

    … of a cylindrical body with thin, flexible end plates (or disks) and an interior spindle coupling the disks together ensuring proper phasing. The sensing mechanism is comprised of single mode optical fiber wound into flat coils and epoxied on to the inside faces of the disks, forming the …

    nps Repository record for Fiber-optic flexural disk accelerometer (opens in a new tab)

  18. Effect of Support Conditions on the Behavior of Elastomeric Bearings

    … bearings sometimes feature thick steel end plates and are connected to the superstructure and substructure by mechanical mean named bonded application. In buildings, traditional practice places the isolation system at the foundation level and calls for the construction of rigid …

    mcmaster Repository record for Effect of Support Conditions on the Behavior of Elastomeric Bearings (opens in a new tab)

  19. Coherent Dynamics and Energetics in Thin Flat Plate Wakes

    … plate, induced by inclusion and exclusion of end plates, are studied. Both wakes are characterized by quasi-periodic vortex shedding but differ in mean topology and typical wake characteristics, such as mean base pressure and recirculation length. Energetically optimal proper orthogonal …

    calgary Repository record for Coherent Dynamics and Energetics in Thin Flat Plate Wakes (opens in a new tab)

Page 1 of 4