Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 19 of 19 for “"energy-based method"”.

  1. Energy Based Method for Generation of Optimum Flight Paths

    … efficiency is the proper management of aircraft energy states. Aircraft accident statistics are replete with examples of aircraft that crossed the runway threshold with excessive energy or maintained insufficient energy to reach the runway. This trend has resulted in aircrews that are trained in …

    odu Repository record for Energy Based Method for Generation of Optimum Flight Paths (opens in a new tab)

  2. Implicit coupled constitutive relations and an energy-based method for material modelling

    … of this thesis are an implicit modelling method for the coupled constitutive relations and an energy-based method for material modelling. The two developed methods utilise implicit models to represent material constitutive relations without the requirement of physical parameters. The first …

    unsw Repository record for Implicit coupled constitutive relations and an energy-based method for material modelling (opens in a new tab)

  3. Development of an Energy-based Liquefaction Evaluation Procedure

    … The objective of this research is to develop an energy-based approach for evaluating the potential for liquefaction triggering. The current state-of-practice for the evaluation of liquefaction triggering is the "simplified" stressbased framework where resistance to liquefaction is correlated to …

    vt Repository record for Development of an Energy-based Liquefaction Evaluation Procedure (opens in a new tab)

  4. A numerical study of elastica using constrained optimization methods

    … the global or local minima of potential energy of discrete elastica, the configurations of elastica are obtained using the constraints satisfying optmization methods. Genetic algorithm is the mechanism to produce a coarse solution, while sequential quadratic programming is the main …

    nus Repository record for A numerical study of elastica using constrained optimization methods (opens in a new tab) Download file for A numerical study of elastica using constrained optimization methods (opens in a new tab)

  5. Online chatter detection using self-evolving automated machine learning fusion

    … This research proposes a self-evolving, online method to detect and avoid chatter in milling operations by fusing deep learning with the knowledge of chatter theory. The process is monitored by collecting vibration data during machining. Windows of data are converted into Short-time Fourier …

    ubc Repository record for Online chatter detection using self-evolving automated machine learning fusion (opens in a new tab) Download PDF for Online chatter detection using self-evolving automated machine learning fusion (opens in a new tab)

  6. Using symmetry to understand nonlinear modal interactions

    … an analytical approach is employed, that is based on nonlinear normal mode, or backbone curve, analysis. <br/>The geometry, i.e. synchronicity and asynchronicity, of internal resonances is investigated using conceptually simple, two-mode systems. Special dynamic behaviours that emerge from …

    bristol Repository record for Using symmetry to understand nonlinear modal interactions (opens in a new tab) Download PDF for Using symmetry to understand nonlinear modal interactions (opens in a new tab)

  7. Dynamic Modelling of Flexible Multibody Systems Subjected to Frictional Impact

    … along the lines of the incremental-iterative method of the Newmark direct integration and Newton-Raphson methods.</p> <p>Frictional impact is then included in the formulation. The prediction of contact establishment and separation is achieved using an event predictor. Point impact is assumed …

    mcmaster Repository record for Dynamic Modelling of Flexible Multibody Systems Subjected to Frictional Impact (opens in a new tab)

  8. A numerical hybrid method for modeling outdoor sound propagation in complex urban environments

    … requirements of conventional numerical methods such as boundary element (BE), finite-difference time-domain (FDTD), or ray-tracing methods. Recently, a considerable amount of work has been devoted to developing energy-based methods for this application, and results have shown the …

    vt Repository record for A numerical hybrid method for modeling outdoor sound propagation in complex urban environments (opens in a new tab)

  9. The Study of Temporal and Spatial Variability of Degree Day Factor of Snowmelt in Colorado

    … using direct measurements of SWE, temperature-based and energy-based models. Due to its simplicity, computational efficiency, and less input data requirement, the temperature-based method is commonly used than the energy-based method. In the temperature-index approach snowmelt is estimated as a …

    unt Repository record for The Study of Temporal and Spatial Variability of Degree Day Factor of Snowmelt in Colorado (opens in a new tab)

  10. Principle Component Analysis Based Approach to Model Deformation of Web Core Beam

    … mode of deformation. This was used to develop a energy based model for a unit cell to determine the values of kinematic variables. The model was homogenized so a structure with many unit cells could be easily analyzed by being discretized into elements much larger than the unit cell size. Using …

    tamu Repository record for Principle Component Analysis Based Approach to Model Deformation of Web Core Beam (opens in a new tab)

  11. Advances in Energy Sensitive X-ray Phase Contrast Measurements

    … the development and test of the firsttable-top energy resolving X-ray refractometer. Energy dependent index decrement, δ, values are extracted for several materials over a range of energy values. The experimental apparatus uses a Micro X-ray Inc. microfocus source with a focal spot size of …

    duke Repository record for Advances in Energy Sensitive X-ray Phase Contrast Measurements (opens in a new tab)

  12. Calibration of Macroscale Elastic and Frictional Properties of Bonded Particle Grains

    … which are difficult to simulate with mesh-based methods. However, the spherical sub-particles cause BPM representations to have different morphological properties than real grains and the bond properties are not trivially related to the elastic properties of the grains. This requires the …

    tamu Repository record for Calibration of Macroscale Elastic and Frictional Properties of Bonded Particle Grains (opens in a new tab)

  13. Pseudo Euler-Lagrange and Piecewise Affine Control Applied to Surge and Stall in Axial Compressors

    … of nonlinear systems, the generalization of this energy-based method poses a drawback that makes obtaining a Lyapunov function a difficult task. Therefore, proposing a method for generating a Lyapunov function for the control synthesis problem of a class of nonlinear systems is of potential …

    concordia Download PDF for Pseudo Euler-Lagrange and Piecewise Affine Control Applied to Surge and Stall in Axial Compressors (opens in a new tab)

  14. Equivalent shell element for passenger ship structural design

    … accurate but computationally light calculation method is already needed in the early design phases when most of the important decisions are made. Currently, the ship's global response is investigated using a coarse mesh global Finite Element (FE) model, in which the mesh size equals the …

    aalto Repository record for Equivalent shell element for passenger ship structural design (opens in a new tab)

  15. Fracture Characterizations of Multi-Scale Fiber Cementitious Composites

    … has shown clear benefits, including enhanced energy dissipation, damage resistance, and overall superior mechanical performance. The mechanisms behind these improvements, however, remain poorly understood. To address this knowledge gap, the study examines the effects of using a low-cost …

    buffalo Repository record for Fracture Characterizations of Multi-Scale Fiber Cementitious Composites (opens in a new tab)

  16. Enhancing Focused Ultrasound Therapy Using Nanoscale Agents

    … intensity focused ultrasound (HIFU), is a new energy-based method that uses ultrasonic energy to treat a range of health disorders and tumors. Despite the great potential for cancer treatment, the HIFU therapies for the breast and abdominal regions have not yet been granted FDA approval. One of …

    waterloo Repository record for Enhancing Focused Ultrasound Therapy Using Nanoscale Agents (opens in a new tab)

  17. Stability analysis of prismatic rock blocks

    … approaches in two dimensions and some graphical methods had been developed to understand the slope stability characteristics of a rock dissected by fractures and discontinuity planes, and subject to seepage and water pressures. The first studies concerning the three-dimensional stability analysis …

    ut-knoxville Repository record for Stability analysis of prismatic rock blocks (opens in a new tab)

  18. Nonlinear Macromechanical Analysis of Polymeric Materials

    A new methodology for predicting the short term and long term responses of viscoelastic and viscoplastic materials is developed in this research. The methodology aims to predict the behaviour of viscoelastic/viscoplastic isotropic material subjected to loading in isochronous condition (temperature …

    waterloo Repository record for Nonlinear Macromechanical Analysis of Polymeric Materials (opens in a new tab)