Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 140 for “"engine out"”.
-
An improved technique for normalizing engine-out minimum-control airspeed data
… airspeed data is applied to a light, twin-engine, propeller-driven aircraft with the critical engine inoperative. In order to determine accuracy and efficiency, this method is compared with the extrapolation technique presently in use for determining standardized values.</p> <p>Results show …
-
EFFECTS OF VARIABLE VALVE ACTUATION ON EXHAUST ENTHALPY AND ENGINE OUT EMISSIONS
… this project was to improve catalyst heating without increasing engine-out emissions. It was decided that the sensible heat portion of the exhaust enthalpy would be the best metric to judge differences between the different strategies. This is because catalyst-in temperatures ignore the energy …
-
Optimized Engine Out Procedures to Extend the Range of Jet Transport Airplanes
The purpose of this study was to develop optimum engine-out procedures for the Boeing 747 and 767 on extended flights that will increase the range of the aircraft in case of engine failure. Theory suggests that an optimum amount of bank angle that will minimize drag resulting from asymmetric thrust …
-
Gasoline Engine-out Particulate Matter Characterization and Control & Low-Cost Particulate Matter Light-Scattering Sensing
… lung cancers, and other health issues. The engine combustion process of fossil fuels is a significant contributor to PM2.5 pollution in many urban areas. Furthermore, recent advancements in low-cost light-scattering PM sensors present a cost-effective solution for real-time spatiotemporal PM …
-
Investigation of a Neural Network Approach in Modeling and Diagnostics of an Engine-out NOx Sensor
… to develop a method for fault detection of an engine-out oxides of nitrogen (NOx) sensor. The aim of the developed method was not only to isolate a fault with the NOx sensor, but to also diagnose faults in other engine subsystems that may result in higher engine-out NOx production. The …
-
Diesel engine out exhaust temperature modelling- moving from a map based to physically based model approach
Engine out exhaust gas is an input to the engine system components downstream, which are directly or indirectly responsible for air charge control, emission regulation, torque control or are used as feedback to the engine control system. This makes the accurate prediction of the exhaust gas an …
-
Simple strategy-based technique to reduce emissions from SCR-equipped heavy-duty diesel engine over different engine-out calibrations
Heavy-duty diesel engine manufacturers, regulators and operators in Europe and US have judged the Selective Catalytic Reduction (SCR) system to be the most suitable exhaust aftertreatment technology to meet the Euro V and US 2010 emission standards for oxides of nitrogen (NOx). The choice of the …
-
CFD Modelling of Down-Sized GDI Engines: Fuel Injection, In-Cylinder Phenomena and Correlation to Engine-Out PN Emissions
… in modern-design Gasoline Direct Injection engines. It does that through the development of a comprehensive 3D-CFD in-cylinder modelling tool that enables a robust and accurate insight into the pre-combustion mechanisms potentially leading to PM formation. The results presented refer to …
-
MODEL-BASED ENGINE-OUT EMISSIONS ANALYSIS FOR A GASOLINE TURBOCHARGED DIRECT INJECTION SPARK-IGNITED ENGINE IN ELEVATED HEV CRANKING SPEED
… Direct Injection (GDI) Spark Ignition (SI) engines for fuel and combustion control. However, their real-time prediction for transient engine operations is complicated, especially when concerning variable valve timing. A dynamic cycle-by-cycle control-oriented discrete nonlinear model is …
-
Control of nitrogen oxide and PM emissions from SCR-equipped 2010 compliant heavy duty diesel engine over different engine-out calibrations.
Diesel engines constitute a valuable solution to the growing demand for higher fuel efficiencies, especially in relation to the rapid growth of fuel prices in recent years. However, the substantially lean conditions typical of diesel exhaust pose a serious challenge to the traditional exhaust …
-
Processes in Optical Diesel Engines - Emissions Formation and Heat Release
… combustion research and optically accessible engines are used to study the combustion process. Images of the combustion are analyzed together with in-cylinder pressure and exhaust gas emission measurements. The results can be divided into two main categories: one about evaluations of optically …
-
CT-114 Tutor: Evaluation of Glide Profiles
<p> The Aerospace Engineering Test Establishment was tasked to evaluate the CT-114 Tutor glide profile under various conditions including engine out and all combinations of landing gear and flaps extension. This thesis records the activities and results of that project [1].</p><p>Engine out glide …
-
The effect of hydrogen substitution on the real-world CO₂, NOx, and PM emissions of a heavy-duty diesel truck
… can reduce the diesel consumption and CO₂ output of diesel engines. This thesis investigates its effect on the real-world, on-road emissions of CO₂, NOx and particulate matter (PM) from a heavy-duty diesel truck. Testing was conducted on a Class 8 truck fitted with a 13 L common-rail …
-
Detailed Characterization of Dual Fuel Low Temperature Combustion with Low Carbon Alternative Fuels
… for adoption in heavy duty on- and off-road engines to realize high efficiencies and low engine-out emissions. Candidate fuels for RCCI combustion include liquid high-reactivity fuel (HRF) and liquid/gaseous low-reactivity fuel (LRF) combinations such as diesel-gasoline, diesel-ethanol, …
-
Ionization In Diesel Combustion For On-Board Diagnostics And Engine Control
Diesel engines have been known for their high thermal efficiency and specific power output, but there is concern about engine-out NOx and particulate matter emissions. To meet the current emission standards, advanced diesel engines are fitted with electronically controlled fuel injection systems …
-
Trim, Control, and Performance Effects in Variable-Complexity High-Speed Civil Transport Design
… and thickness distribution, fuselage shape, engine placement and thrust, using 29 design variables. While adding trim and control it was found necessary to simultaneously consider landing gear integration. We include the engine-out and crosswind landing requirements, as well as engine nacelle …
-
Fuel/air Mixing and Nitrogen Oxide Formation in a Lean Premixed Gas Turbine Combustor
… design tool model was developed to predict engine-out NOx concentrations for lean premixed combustors. The CRM model only requires information regarding the reactor loading, the combustor inlet state, and the combustor geometry. Model improvements were obtained by including the effects of …
-
Experimental measurement and analysis of in-cylinder fuel-air mixing and combustion using an optical DI Diesel engine under realistic operating conditions
In order to improve engine-out emissions and performance of Diesel combustion systems, continued insight into the complex combustion and fuel spray processes must be gained. An optically accessible Diesel engine and modern diagnostic imaging methods can contribute to the understanding of the fuel …
Page 1 of 7