Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 25 for “"enhanced surfaces"”.

  1. Forced Convection Cooling of Electric Motors Using Enhanced Surfaces

    … in the electrical motor is by using extended surfaces (i.e. heat sinks). These surfaces are extruded from the motor casing and air is forced though them by a cooling fan. This cooling approach is simple to be implemented and has zero carbon emission to the environment. Adding ribs on the motor …

    ucf Repository record for Forced Convection Cooling of Electric Motors Using Enhanced Surfaces (opens in a new tab)

  2. Nucleate pool boiling of high dielectric fluids from enhanced surfaces

    … of the heat transfer performance of three enhanced heat transfer surfaces, a Union Carbide, Linde High Flux, a Hitachi Thermoexecl-E, a Wieland Gewa-T, and a plain copper surface in the nucleate boiling regime in R-113 and FC-72 are presented. Prior to obtaining the data, each of the …

    nps Repository record for Nucleate pool boiling of high dielectric fluids from enhanced surfaces (opens in a new tab)

  3. High Heat Flux Spray Cooling With Ammonia On Enhanced Surfaces

    … on high heat flux spray cooling with ammonia on enhanced surfaces. Compared to some other commonly used coolants, ammonia possesses important advantages such as low saturation temperature, and high heat absorbing capability. Moreover, enhanced surfaces offer potential to greatly improve heat …

    ucf Repository record for High Heat Flux Spray Cooling With Ammonia On Enhanced Surfaces (opens in a new tab)

  4. Characterization of pool boiling heat transfer from porous-coating-enhanced surfaces

    … investigation of pool boiling from coated surfaces, it was observed that for a given surface coating, several additional parameters might affect the heat transfer performance of the surface, and the coating porosity and particle morphology did not vary independent of each other. Hence, to …

    purdue-thes Repository record for Characterization of pool boiling heat transfer from porous-coating-enhanced surfaces (opens in a new tab)

  5. REVERSE DIBLOCK COPOLYMER MICELLAR GROWTH OF DESIGNER NANOPARTICLES FOR ENHANCED SURFACES

    … loaded polymer and nanoparticles. We have tested enhanced Raman methods using AFM probes to extend the resolution of normal Raman to view monolayers of empty polymers as well. Moreover, using FeCl3-loaded polymer micelles, the control offered by PS-b-P2VP templated growth on the crystal structure …

    mcmaster Repository record for REVERSE DIBLOCK COPOLYMER MICELLAR GROWTH OF DESIGNER NANOPARTICLES FOR ENHANCED SURFACES (opens in a new tab)

  6. Nucleate pool-boiling of R-114 refrigerant and oil mixtures from water-heated enhanced surfaces

    … pool temperature of 13.8 ˚C. Results for the two enhanced tubes with and without oil are compared to the smooth tube data. Enhancement factors for the overall heat- transfer coefficient were 4.0 and 3.6 for the structured surface and porous-coated tubes, respectively, in pure refrigerant and at a …

    nps Repository record for Nucleate pool-boiling of R-114 refrigerant and oil mixtures from water-heated enhanced surfaces (opens in a new tab)

  7. SINGLE PHASE JET IMPINGEMENT ON ENHANCED SURFACES AS ACOOLING SOLUTION FOR SIC INVERTER POWER MODULES

    … considered. Jet Impingement on textured surfaces that are attached to or manufactured as an integrated part of direct bonded copper (DBC) substrate is numerically investigated for water-ethylene glycol mixtures. Pin-fin covered surfaces show better thermal performance compared to folded …

    gatech Repository record for SINGLE PHASE JET IMPINGEMENT ON ENHANCED SURFACES AS ACOOLING SOLUTION FOR SIC INVERTER POWER MODULES (opens in a new tab)

  8. Two-Phase Spray Cooling with HFC-134a and HFO-1234yf for Thermal Management of Automotive Power Electronics using Practical Enhanced Surfaces

    … and HFO-1234yf refrigerants using practical enhanced heat transfer surfaces. Results of the study were expected to provide a quantitative spray cooling performance comparison with working fluids representing the current and next-generation mobile air conditioning refrigerants, and demonstrate …

    unt Repository record for Two-Phase Spray Cooling with HFC-134a and HFO-1234yf for Thermal Management of Automotive Power Electronics using Practical Enhanced Surfaces (opens in a new tab)

  9. Self-Assembled Hybrid-Dimensional Structure for Enhanced SERS Biosensing

    Surface enhanced Raman spectroscopy (SERS) is a prominent analytical technique that can be used to detect and identify analytes adsorbed on a plasmonically enhanced surface. Traditional plasmonically enhanced surfaces used for SERS typically constitute a metal nanomaterial on a flat surface. …

    umn Repository record for Self-Assembled Hybrid-Dimensional Structure for Enhanced SERS Biosensing (opens in a new tab)

  10. An Experimental Study on Pool Boiling Performance Enhancement and Effect of Aging

    … surface. This research focuses on developing an enhanced microscale structures on plain copper surfaces to improve the pool boiling performance. Additionally, the longevity (or the long-term stability) and aging of these enhanced structures, and their effects on the pool-boiling performance is …

    rit Repository record for An Experimental Study on Pool Boiling Performance Enhancement and Effect of Aging (opens in a new tab)

  11. Investigation of Enhanced Surface Spray Cooling

    … of spray parameters and test conditions. Enhanced spray cooling investigations to date have been limited to surface roughness studies. These studies concluded that surface tolerance (i.e. variations in machined surface finish) had an impact upon heat flux when using pressure atomized …

    maryland Repository record for Investigation of Enhanced Surface Spray Cooling (opens in a new tab)

  12. Enhancement of Pool Boiling Heat Transfer using a Combination of Open Microchannels and Microporous Surfaces

    … can be further augmented with the use of enhanced surfaces. The present research is focused on developing microporous surface coatings on the plain and microchannel surfaces to further enhance pool boiling heat transfer. In this work, a two-step electrodeposition technique involving …

    rit Repository record for Enhancement of Pool Boiling Heat Transfer using a Combination of Open Microchannels and Microporous Surfaces (opens in a new tab)

  13. Direct Immersion Cooling Via Nucleate Boiling of HFE-7100 Dielectric Liquid on Hydrophobic and Hydrophilic Surfaces

    … the effect of hydrophobic and hydrophilic surfaces characteristics on nucleate boiling heat transfer performance for the application of direct immersion cooling of electronics. A dielectric liquid, HFE – 7100 was used as the working fluid in the saturated boiling tests. Twelve types of …

    unt Repository record for Direct Immersion Cooling Via Nucleate Boiling of HFE-7100 Dielectric Liquid on Hydrophobic and Hydrophilic Surfaces (opens in a new tab)

  14. Pool Boiling Heat Transfer Surface Enhancement using Electrodeposition with Non-Electrolyte Bath

    … were collected to help characterize the enhanced surfaces. These surfaces were subjected to pool boiling under atmospheric conditions using distilled water as a working fluid. Chips were mounted into the pool boiling experimental set-up and were heated at 5 V increments until critical …

    rit Repository record for Pool Boiling Heat Transfer Surface Enhancement using Electrodeposition with Non-Electrolyte Bath (opens in a new tab)

  15. Perovskite catalysts enhanced combustion on porous media and thermoelectric power conversion

    … are used as a porous media for a catalytically enhanced superadiabatic combustion of a lean mixture of methane and air. Perovskite catalytic enhancement of SiC porous matrix with La0.75Sr0.25Fe0.6Cr0.35Ru0.05O3, La0.75Sr0.25Fe0.6Cr0.4O3, La0.75Sr0.25Fe0.95Ru0.05O3, La0.75Sr0.05Cr0.95Ru0.05O3, …

    ucf Repository record for Perovskite catalysts enhanced combustion on porous media and thermoelectric power conversion (opens in a new tab)

  16. Structured-Porous Screen Laminate Surface Enhancements for High Heat Flux Boiling of Water under Subatmospheric Pressure

    … the utility of fine filament screen-laminate enhanced surfaces as high heat flux boiling surfaces and effective bubble nucleation sites. Experiments were conducted on vertically oriented, multi-layer laminates in distilled water at pressures of 0.2 atm - 1.0 atm. The first phase of this work …

    unr Repository record for Structured-Porous Screen Laminate Surface Enhancements for High Heat Flux Boiling of Water under Subatmospheric Pressure (opens in a new tab)

  17. Role of surface conditions in the enhancement of heat transfer rates in convective boiling

    … film boiling by means of macroroughnened surfaces and the application of coatings. Three types of tubes were experimentally tested in a vertical upward annular flow system , namely (1) a Union Carbide high flux stainless steel tube, (2) a Gewa-Y copper-Nickel tube, and (3) a smooth tube …

    ut-knoxville Repository record for Role of surface conditions in the enhancement of heat transfer rates in convective boiling (opens in a new tab)

  18. The effects of electric fields on phase change processes in industry

    … nucleate boiling heat transfer at low superheat surfaces in heat exchangers. The major emphasis of the work has been to probe the compound effect of EHD and passive enhanced sur-faces on nucleate boiling. Field potential distribution for six different surfaces has been predicted and analyzed …

    city-london Download PDF for The effects of electric fields on phase change processes in industry (opens in a new tab)

Page 1 of 2