Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 9 of 9 for “"equivalent input noise"”.
-
Investigation of HBT preamplification for high speed optical communication systems.
A noise analysis for a Common-Collector-Cascode traveling wave HBT preamplifier is developed, resulting in an expression for the preamplifier's equivalent input noise current density. A photoreceiver, consisting of a P-I-N and GaAs HBT MMIC distributed amplifier, was implemented using Nortel's GaAs …
-
A portable computer-controlled Johnson noise thermometer
<p>A Johnson noise power thermometer was implemented using existing filters and low-noise preamplifiers and main amplifiers. The interfacing circuitry needed to provide on-board computer control was designed and fabricated. Algorithms were developed for the calibration of the thermometer using a …
-
A low-noise, wide-band CMOS charge-sensitive preamplifier for use with a cadmium zinc telluride strip detector in a high-resolution small animal x-ray CT system
<p>A low-noise, wide-band CMOS charge-sensitive preamplifier has been designed for use with a Cadmium Zinc Telluride (CZT) strip detector in the Oak Ridge NationalLaboratory's (ORNL) MicroCAT small animal x-ray CT imaging system. The Characteristics of the CZT strip detector have been studied to …
-
A survey of low-noise nucleonic amplifiers
… with the addition of a minimum amount of noise. The problems encountered in this were considered both theoretically and experimentally. The "classical" theory of Gillespie for systems using ion chambers and tube amplifiers is generalized to include systems using the modern solid-state …
-
The design and analysis of a discrete wide band power operational amplifier
… open-loop response, closedloop response, and noise of the amplifier. The calculated variation of the bias currents was less than 1% per degree centigrate between zero and fifty degrees. The calculated equivalent input noise voltage was 3.19 (10<sup>-9</sup>) volts/(Hz<sup>1/2</sup>). The …
-
Investigation of a new positron emission tomography detector using bismuth germanate, avalanche photodiodes and low noise, wide band CMOS preamplifiers
… (APDs). As a part of the investigation a low-noise, wide-band CMOS preamplifier array is designed and tested with APD based detectors.</p> <p>The fundamental theory of APD operation is first reviewed and the governing equations are derived. The frequency dependent behavior of the APD is …
-
Nonlinear amplification techniques for inertial MEMS sensors
… performance, improve sensitivity and Signal to Noise Ratio (SNR). In this thesis the application of parametric resonance amplification and damping to both modes of a vibratory gyroscope is carried out using specialized combs. Gap-varying combs, which are usually used for the sensing mode are …
-
Design and characterization of integrating silicon junction field-effect transistor amplifiers for operation in the temperature range 40-77 K.
… and stability. However, due to Johnson noise in the feedback resistor, the read noise in one second achieved by such amplifiers is about 500 electrons per second. A drastic improvement in sensitivity was demonstrated using a simple form of integrating JFET amplifiers. Therefore, the …
-
Effects of aging on face perception: Exploring efficiency, noise & orientation
… sources of random variability -- internal noise -- and the efficiency with which task-relevant stimulus information is utilized. This thesis uses several behavioural, psychophysical methods to examine how age-related changes in one or both of these factors affect face processing. Chapter 2 …