Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 1171 for “"etch"”.
-
Determination of stop etch time of a plasma etch reactor
Not Available
-
Graphene etch mask for silicon
… its mechanical and chemical strength as an etch mask for silicon is tested.We attempt to present the progress toward a working model of a graphene etch mask. The influence of the mask geometry, etch method, etch conditions, substrate quality and other factors will be explored to present a …
-
Mechanisms and Development of Etch Resistance for Highly Aromatic Monomolecular Etch Masks - Towards Molecular Lithography
… polymers, in a monolayer, serves directly as the etch mask; eliminating the photolighographic size limitation of light at a specific wavelength. The Ohnishi- and Ring parameter suggests that cyclic carbon rich molecules have a high resistance towards the plasma process, used to create the features …
-
Virtual metrology for plasma etch processes.
… with a particular focus on semiconductor plasma etch. Introductory material covering the essentials of plasma physics, plasma etching, plasma measurement techniques, and black-box modelling techniques is rst presented for readers not familiar with these subjects. A comprehensive literature review …
-
Improving wafer temperature uniformity for etch applications
… uniformity is one of the major factors affecting etch performance at elevated temperatures. Several factors influence temperature uniformity. In order to achieve the desired temperature uniformity on the surface of the wafer, it is essential to understand the thermal behavior of the various …
-
Fault detection and classification in etch tools
… in the Advanced Process Control module and the Etch module at Advanced Micro Devices, 1 played an important role in the advanced process control mechanism. The objective of my thesis project report is to explain the features and benefits of the fault detection and classification mechanism, with …
-
Design of a Full Etch Grating Coupler
The design of a full etch, constant pitch grating coupler with upper oxide cladding is documented and analyzed for coupling to the dominant TE mode of a waveguide on a commercially available SOI platform at 1550nm. A high level design approach using Fresnel reflection theory, waveguide mode theory, …
-
Scalable and CMOS-compatible catalyst assisted chemical etch
… to 3D has led to unique challenges in deep etching of nanoscale geometries by plasma etch, which limits creation of small and deep features. Metal Assisted Chemical Etching (MACE or MacEtch), an electroless catalyst-based wet etch discovered in 2000, has superior etch anisotropy and sidewall …
-
Mechanism of fluoride-based etch and clean processes
Fluoride-containing solutions are widely used to etch silicon dioxide-based films. A critical issue in integrated circuit (IC) and microelectromechanical systems (MEMS) fabrication is achievement of adequate selectivity during the etching of different film materials when they are present in …
-
A model for initiation of aluminum etch tunnels
In the past, tunnel etching of aluminum has been used primarily in the production of electrolytic capacitors. Research has therefore focussed on the parameters which will increase capacity. The increase in capacity obtained is in direct proportion to the increase in effective surface area. However, …
-
Process monitoring, modeling, and control of plasma etch systems
Selective etching of silicon dioxide over silicon is a frequently used process in the manufacture of semiconductor devices. Although central to the microelectronics manufacturing process, control strategies for plasma etch systems have been limited to statistical based process control and recipe …
-
Shallow Etch Recipe Design using DOE for Silicon Waveguides
… of this project was to make a new shallow etch recipe with etch rate of 100 nm/min with STS etcher tool for silicon waveguide fabrication. This shallow etch recipe will be used to develop a waveguide demonstration platform for education in integrated photonics fabrication at RIT. The pseudo …
-
Fluorocarbon Post-Etch Residue Removal Using Radical Anion Chemistry
… of integrated circuits, fluorocarbon plasma etching is used to pattern dielectric layers. As a byproduct of the process, a fluorocarbon residue is deposited on exposed surfaces and must be removed for subsequent processing. Conventional fluorocarbon cleaning processes typically include at …
-
Hydrogen-based plasma etch of copper at low temperature
… resistivity than aluminum (Al), Cu subtractive etching processes have not been developed at temperatures less than 180 °C, primarily due to the inability to form volatile etch products at low temperature. The conventional damascene technology avoids the need for subtractive etching of Cu by …
-
Unsupervised Feature Extraction Techniques for Plasma Semiconductor Etch Processes
… on semiconductor chips continue to shrink plasma etching is becoming a more and more critical process in achieving low cost high-volume manufacturing. Due to the highly complex physics of plasma and chemical reactions between plasma species, control of plasma etch processes is one of the most …
Page 1 of 59