Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 81 for “"etch rates"”.

  1. Mechanism of wet anisotropic etching of silicon for nano-scale applications

    … MEMS devices require the use of anisotropic etching and variety of concave structures. Analysis of these structures uncovered phenomenon in the etch rates of surfaces exposed by anisotropic etchant. This phenomenon could not be explained without consideration of the composition of these …

    concordia Download PDF for Mechanism of wet anisotropic etching of silicon for nano-scale applications (opens in a new tab)

  2. Chemical studies of plasma etchants used in integrated circuit manufacture

    Plasma or "dry" etching is an essential process for the production of modern microelectronic circuits. However, despite intensive research, many aspects of the etch process are not fully understood. The results of studies of the plasma etching of Si and Si02 in fluorine-containing discharges, and …

    aston Download PDF for Chemical studies of plasma etchants used in integrated circuit manufacture (opens in a new tab)

  3. LASER PROCESSING OF III-V SEMICONDUCTORS

    Laser-controlled etching of GaAs, Al3Ga7As, Al4Ga6As and Al5Ga5As was investigated in detail for varying laser parameters such as laser power, beam scanning speed, beam duty cycle and number of scans. This was done for materials of different substrate doping types and doping concentrations. An …

    nus Repository record for LASER PROCESSING OF III-V SEMICONDUCTORS (opens in a new tab) Download file for LASER PROCESSING OF III-V SEMICONDUCTORS (opens in a new tab)

  4. Modelling of anisotropic etching of silicon in tetra-methyl ammonium hydroxide : anomalies due to facet boundary effects

    Anisotropic etching of silicon is one of the fundamental techniques for the fabrication of micromachined structures such as microsensors and microactuators. Although the technique is used extensively in industry, the fundamentals of the atomic etching mechanism are still not well understood. This …

    concordia Download PDF for Modelling of anisotropic etching of silicon in tetra-methyl ammonium hydroxide : anomalies due to facet boundary effects (opens in a new tab)

  5. Development of fabrication processes for silicon and gallium nitride photonic crystal structures.

    … crucial steps such as lithography and plasma etching, is very challenging due to the nanoscale features. ICP-RIE is one of the preferred etching techniques because of its good control over the aspect ratio, high etch rates, low surface damage and many other advantages. This work deals with the …

    wvu Repository record for Development of fabrication processes for silicon and gallium nitride photonic crystal structures. (opens in a new tab)

  6. Characterization of rf cylindrical magnetron plasmas and reactive ion etching of silicon/silicon dioxide: Its effect on radiation damage and contamination

    … spectroscopy and optical actinometry. Also the etch rates and etch profiles of Si/SiO$\sb2$ for 13.56MHz were studied for various conditions in CF$\sb4$/H$\sb2$ and CHF$\sb3$ plasmas as a function of magnetic field strength. The degree of radiation damage and contamination generated during the …

    uiuc Repository record for Characterization of rf cylindrical magnetron plasmas and reactive ion etching of silicon/silicon dioxide: Its effect on radiation damage and contamination (opens in a new tab)

  7. Characterization of low pressure chemical vapor deposited silicon dioxide thin films

    … by varies deposition temperatures and flow rates series. SiO_2 thin films were evaluated for density, porosity, and refractive index. Techniques for evaluation of the above mentioned parameters for this work included the use of infrared absorption spectroscopy, preferential etch procedures, …

    njit Repository record for Characterization of low pressure chemical vapor deposited silicon dioxide thin films (opens in a new tab)

  8. Domain engineering techniques and devices in lithium niobate

    … device applications. <br/><br/>Experimental etch-rate measurements from a parametric study of etch-rates and etch-quality of single-crystal lithium niobate z-faces, as a function of specific ratios for mixtures of HF/HNO<sub>3</sub>, to ascertain whether the widely-employed 1:2 mixture was in …

    soton Download PDF for Domain engineering techniques and devices in lithium niobate (opens in a new tab)

  9. Etching Process Development for SiC CMOS

    … is the most significant bottleneck in the etching process; it was studied and improved upon. Etching SiC can be a challenge with its reinforced crystal structure. Chlorine-based inductively coupled plasma (ICP) etching of intrinsic SiC and doped SiC, SiO2, and Silicon has been studied. A …

    arkansas Repository record for Etching Process Development for SiC CMOS (opens in a new tab)

  10. KOH anisotropic silicon etching for MEMS accelerometer fabrication

    … by anisotropic potassium hydroxide (KOH) wet etching. In low cost bulk micromachining of silicon for MEMS (Micro Electro Mechanical Systems), anisotropic wet etching of single crystalline silicon in aqueous KOH solutions is a technically important process. Anisotropic etching of silicon is …

    aalto Repository record for KOH anisotropic silicon etching for MEMS accelerometer fabrication (opens in a new tab)

  11. Modelling, simulation and multivariable control of plasma etching of silicon and silicon dioxide

    Plasma etching has been used extensively in the microelectronics industry for integrated circuit fabrication. However, the optimisation of this process is quite challenging because the plasma etching process is complex and not fully understood. An experimental and theoretical study of the etching …

    dcu Download PDF for Modelling, simulation and multivariable control of plasma etching of silicon and silicon dioxide (opens in a new tab)

  12. Controlling Activation Energy to Wafers and Walls in Plasma Processing Reactors for Microelectronics Fabrication

    Wafer-to-wafer reproducibility during plasma etching presents another challenge. The use of low-pressure, high-density discharges results in increasing buildup of etch products in the plasma reactor resulting in increased interactions of etch products with wafer and non-wafer surfaces, alike. …

    uiuc Repository record for Controlling Activation Energy to Wafers and Walls in Plasma Processing Reactors for Microelectronics Fabrication (opens in a new tab)

  13. Direct Write Editing of Electronic Materials by Gas Assisted Focused Electron Beam Induced Etching for Device Prototyping

    <p>Focused electron beam etching (FEBIE) is a direct-write material removal technique that was used with gaseous XeF<sub>2</sub> [xenon difluoride] for a chemical assist. FEBIE experiments took place in a scanning electron microscope (SEM) with a gas injection system (GIS) that flowed in …

    utk-theses Repository record for Direct Write Editing of Electronic Materials by Gas Assisted Focused Electron Beam Induced Etching for Device Prototyping (opens in a new tab)

  14. Characterization of plasmas from a pulsed jet discharge with applications to VUV spectroscopy and micromechanics

    … with NF$\sb3$ to produce excited fluorine ions, etch rates in excess of 10 $\mu$m/min. have been achieved in silicon, which may have application to micromechanics.

    rice Repository record for Characterization of plasmas from a pulsed jet discharge with applications to VUV spectroscopy and micromechanics (opens in a new tab)

  15. Characterization of reactive ion etching of III-V compound semiconductor materials

    Reactive ion etching (RIE) of III-V compound semiconductor materials such as InP, InGaAs, InAlAs, and InGaAsP in methane (CH$\sb4$) gas mixtures has been investigated. Etch rates of 800, 400 and 600 A are obtained for InP, InGaAs, and InGaAsP, respectively. Optimum processes have been developed for …

    uiuc Repository record for Characterization of reactive ion etching of III-V compound semiconductor materials (opens in a new tab)

  16. Light activated Cl₂ etching of GaAs and optical holographic pattern formation

    … and the corresponding photothermal Cl₂ etching of GaAs was accounted for. The temperature dependence of the photochemical etch rate was examined. The light-induced etch rate potentially follows an Arrhenius temperature dependence with an activation energy of 0.161 eV. Near 200°C the …

    ubc Repository record for Light activated Cl₂ etching of GaAs and optical holographic pattern formation (opens in a new tab) Download PDF for Light activated Cl₂ etching of GaAs and optical holographic pattern formation (opens in a new tab)

  17. Downstream etching of indium phosphide and indium with hydrogen atoms and methyl radicals

    The etching of indium phosphide and indium by H atoms and methyl radicals has been studied in a discharge flow system at temperatures between 25 and 300°C. The results indicate that the hydrogen atoms react with InP to produce In metal globules and PH₃(g) at temperatures greater than 160°C. Methyl …

    ubc Repository record for Downstream etching of indium phosphide and indium with hydrogen atoms and methyl radicals (opens in a new tab) Download PDF for Downstream etching of indium phosphide and indium with hydrogen atoms and methyl radicals (opens in a new tab)

  18. Reactive ion etching investigation for quartz and lithium niobate

    Reactive Ion Etching (RIE) is used to etch single crystal quartz, lithium niobate and amorphous silicon dioxide. In this dry etching process, Freon 116 (C2F6) gas was used to etch a groove in the three materials. Various etching techniques, plasma chemistry, fabrication processes and experimental …

    ucf Repository record for Reactive ion etching investigation for quartz and lithium niobate (opens in a new tab)

Page 1 of 5