Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 39 for “"euler-euler"”.

  1. Numerical simulation of gas-liquid flows in bubble columns using the Euler-Euler multiphase model

    … support the adoption of well-posed forms of the Euler-Euler two-fluid model in detailed simulation of gas-liquid flows in bubble columns, widely used in the chemical and biochemical industries.

    iastate Repository record for Numerical simulation of gas-liquid flows in bubble columns using the Euler-Euler multiphase model (opens in a new tab)

  2. 3D-Euler-Euler modeling of adiabatic poly-disperse bubbly flows based on particle-center-averaging method

    … in bubble force models used in the standard Euler-Euler simulations. The bubble force models are typically developed by assuming that the forces act on the bubbles' centers of mass. However, in the standard Euler-Euler model, each bubble force is a function of the local gas volume fraction …

    qucosa-diss

  3. Pneumatic conveying in the dense and dilute phase

    … Two computational models were used, one with an Euler-Lagrange frame of reference and the other, an Euler-Euler one. The Euler-Lagrange model takes into account particle-wall collisions but not particle-particle interactions, and was only done in the dilute solid phase. The Euler-Euler model used …

    nus Repository record for Pneumatic conveying in the dense and dilute phase (opens in a new tab) Download file for Pneumatic conveying in the dense and dilute phase (opens in a new tab)

  4. Multiphase Flow Modeling for Design and Optimization of a Novel Down-flow Bubble Column

    The application of the Euler-Euler framework based Computational Fluid Dynamics (CFD) models for simulating the two-phase gas-liquid bubbly flow in down-flow bubble columns is discussed in detail. Emphasis is given towards the modelling and design optimization of a novel down-flow bubble column. …

    lsu-thes Repository record for Multiphase Flow Modeling for Design and Optimization of a Novel Down-flow Bubble Column (opens in a new tab)

  5. EFFECT OF FLOW PARAMETERS OF WATER AND AIR ATOMIZED SPRAYS ON COOLING INTENSITY OF HOT SURFACES

    … kapky (mikromodel). Zatímco zbývající dva, Euler-Euler model a Euler-Lagrange model, byly aplikovány v modelu celého paprsku trysky (makromodel). Mikromodel popisuje dynamiku volného pádu vodní kapky. Pro malé průměry kapek (~100µm) standardní model povrchového napětí (Continuum Surface …

    brno-tech Repository record for EFFECT OF FLOW PARAMETERS OF WATER AND AIR ATOMIZED SPRAYS ON COOLING INTENSITY OF HOT SURFACES (opens in a new tab)

  6. Mixing in bi-dispersed granular flows

    … objective of this study is to use a multi-fluid Euler-Euler methodology to predict mixing and segregation phenomena in bi-dispersed flows. The method was extended to simulate the hydrodynamics of biomass and sand particles inside a fluidized bed.</p> <p>Further, an attempt was made to quantify …

    iastate Repository record for Mixing in bi-dispersed granular flows (opens in a new tab)

  7. Performance evaluation and improvements of CFD-based aerodynamic design optimization

    … on aerodynamic design optimization. The Euler, Euler/boundary-layer, and compressible and incompressible Navier-Stokes equations were used for the flow analyses. Inverse design optimization used a least-square method to minimize pressure discrepancies between a target and the designed …

    uiuc Repository record for Performance evaluation and improvements of CFD-based aerodynamic design optimization (opens in a new tab)

  8. On the Prediction of Gas Hold-up in Ebullated Bed Reactors

    … two-phase systems were also simulated with the Euler-Euler model using a finite volume method in the OpenFOAM toolbox. The average bubble size is a key input to this model and must be representative of the physical system. Provided this condition is met, the Euler-Euler model can predict the …

    waterloo Repository record for On the Prediction of Gas Hold-up in Ebullated Bed Reactors (opens in a new tab)

  9. Theoretical and experimental investigations on critical multiphase flows in safety relief valves and nozzles

    … such processes is investigated.Two fluid (Euler-Euler) multi-dimensional modelling approaches with a mixture k-? turbulence model to predict such conditions are investigated. The study has been divided into two stages: firstly, for fixed mass fraction conditions air-water two phase critical …

    strathclyde Repository record for Theoretical and experimental investigations on critical multiphase flows in safety relief valves and nozzles (opens in a new tab)

  10. Integrated modelling of moisture release, transport and buffering in housing

    … such processes is investigated.Two fluid (Euler-Euler) multi-dimensional modelling approaches with a mixture k-? turbulence model to predict such conditions are investigated. The study has been divided into two stages: firstly, for fixed mass fraction conditions air-water two phase critical …

    strathclyde Repository record for Integrated modelling of moisture release, transport and buffering in housing (opens in a new tab)

  11. A Study of the Performance of Wind Turbines Fitted with Sprayed Liquid Flaps

    … flows. Computational Fluid Dynamics with an Euler-Euler multiphase approach is employed to assess the influence of the SLF on a wind turbine's power generation capabilities. With the need for multiphase physics comes increased computational cost which poses a challenge for future research …

    ucf Repository record for A Study of the Performance of Wind Turbines Fitted with Sprayed Liquid Flaps (opens in a new tab)

  12. Design and experimental study with laser doppler anemometry of a circulating fluidized bed

    … van een transiënt 3D hydrodynamisch model (Euler-Euler) voor de beschrijving van de hydrodynamica in risers, gebaseerd op de tijdsafhankelijke Navier-Stokes vergelijkingen voor de gas- en vaste fase, FLOW-ME® (De Wilde et al., 2002). Door de fundamentele aanpak groeide de nood aan een …

    ghent Repository record for Design and experimental study with laser doppler anemometry of a circulating fluidized bed (opens in a new tab)

  13. Simulação computacional e análise exergética da gaseificação de bagaço de cana-de-açúcar em leitos fluidizados borbulhantes

    … process in bubbling fluidized beds using an Euler-Euler approach. The use of the developed methodology may help the future design of new gasifiers as the understanding of the flow behavior inside some already existent gasifiers. Here, the effects of the use of thermofluid dynamics closure …

    brazil-uerj Repository record for Simulação computacional e análise exergética da gaseificação de bagaço de cana-de-açúcar em leitos fluidizados borbulhantes (opens in a new tab)

  14. Estudo numérico-experimental da gaseificação de pellets de bagaço de cana-de-açúcar em leito fluidizado circulante

    … tests in a pilot plant; and CFD simulations with Euler-Euler formulation to describe the gasification process. The used methodology were: Arrhenius parameters determination for the pellets drying and devolatilization processes through TGA experiments; and gasification experiments at 850 ° C using …

    brazil-uerj Repository record for Estudo numérico-experimental da gaseificação de pellets de bagaço de cana-de-açúcar em leito fluidizado circulante (opens in a new tab)

  15. Analysis of Multiphase Flow Centrifuge Decanter Separator Using CFD Simulations

    … in parameters, strategies and models. The Euler- Euler and Mixture multiphase models were used to predict the distribution of water and solids throughout the domain within the decanter separator and determine how efficient the separation process is in terms of the amount of exiting solids. …

    chalmers Repository record for Analysis of Multiphase Flow Centrifuge Decanter Separator Using CFD Simulations (opens in a new tab)

  16. Experimental Analysis and Improved Modelling of Disperse Two-Phase Flows in Complex Geometries

    … Computational Fluid Dynamics (CFD) based on the Euler−Euler framework has become a popular tool. However, accurate CFD prediction for a fuel assembly geometry is still a challenge. The reason is that the accuracy of two-phase flow simulations is highly dependent on adequate modelling of phase …

    qucosa-diss

  17. Predicting Flame Stability, Ash Deposition And Radiative Heat Transfer Characteristics During Oxy-Fuel Combustion Of Pulverized Coal Using Different Multiphase Modeling Frameworks

    … parallelization efficiencies. On the other hand, Eulerian particle tracking methods, like the population balance framework, are more amenable to capturing the nucleation, fragmentation and coagulation characteristics of ash. In addition, near-wall turbulence characteristics and radiative heat …

    nodak Repository record for Predicting Flame Stability, Ash Deposition And Radiative Heat Transfer Characteristics During Oxy-Fuel Combustion Of Pulverized Coal Using Different Multiphase Modeling Frameworks (opens in a new tab)

  18. Determining Gravelpack Fluidization Flow Velocity

    … the particle motion phenomena according to the Euler-Euler approach that treats each of two phases (inflowing hydrocarbon and the gravel) as a continuum. Results of this study will be useful in designing gravelpack completions in ultra-high rate wells.

    houston Repository record for Determining Gravelpack Fluidization Flow Velocity (opens in a new tab)

  19. Development and validation of a novel hybrid CFD slurry model

    … speaking, be separated into two categories: Euler-Euler (EE), and Euler-Lagrange (EL). EE models the fluid and particles as two continua, is fast to run, but lacks particle impact data which is required for erosion modelling. EL models a fluid phase and a particulate phase, is more …

    strathclyde Repository record for Development and validation of a novel hybrid CFD slurry model (opens in a new tab)

  20. Internals In Gas-Liquid Systems

    … contact and separation problems (using Euler-Euler based Computational Fluid Dynamic (CFD) models) at different scales. We have explored process intensive solutions, design optimizations by introducing internals in these gas-liquid operations. A 500L pilot plant scale and a 7000L …

    lsu-thes Repository record for Internals In Gas-Liquid Systems (opens in a new tab)

Page 1 of 2