Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 1342 for “"experimental testing"”.
-
Design and experimental testing of metamaterial-based agitators
… with a commercial extruded heat sink where experimental testing was conducted to investigate the validity of the modified configuration. Vortex-induced vibrations (VIV) of structures have attracted much attention these years due to its application in many engineering disciplines. Taking …
-
Design and experimental testing of small-scale wind turbines.
… speeds. This thesis investigates the design and testing of these turbines. Concerns specific to small-scale design, such as low Reynolds number flow, separation, and low wind speed power generation are addressed. A test apparatus was developed to validate the design procedure, and specific …
-
Experimental testing and numerical modelling of honeycomb structural fuse
… of the proposed model was validated using experimental results. The study shows that the newly proposed HSF has stable energy dissipation, which can be used as an efficient metallic damper for seismic applications.
-
Experimental Testing and Modelling of Adhesively Joined T-structures
… quasi-static and dynamic load levels. Structural testing was undertaken on T-shaped samples created by adhesively joining two Al6063-T5 C-channels. For each adhesive, four structural experimental tests were undertaken including quasi-static direct shear (2.5 mm/min), quasi-static torsion (2.5 …
-
Simulation and Experimental Testing of Additively Manufactured Strain Gauges
Additive manufacturing has seen a rapid increase as a method of fabricating both design phase prototypes and end-user products. The increase in development of the technology has driven the development of new products such as conductive 3D printer filaments that can be used to fabricate electrically …
-
Heterogeneous nanocomposite adhesive: Experimental testing and computational multiscale modeling
… for characterization and modeling. The experimental testing of this composite adhesive with unique characteristics then also provides support for the development of open issues in multiscale heterogeneous adhesive models.
-
Experimental testing of bimetallic and reactive shaped charge liners
A series of 13 shaped charge tests was conducted. The primary objectives were to investigate small scale bimetallic and reactive liners and to record the target deformation characteristics of larger scale reactive liners. Tests 1 - 9 used liners of 20.02 mm diameter and were conducted in either a …
-
Stability seeding : experimental testing of a new bank protection technique
The demand for development near rivers, coupled with changes to the hydrologic regime have resulted in an increase in the frequency of high magnitude flooding events. These flooding events pose a threat to infrastructure. To protect infrastructure along channels, traditional bank protection is …
-
Silicon photovoltaics: experimental testing and modelling of fracture across scales
The study of the properties of materials can be addressed through a multi-scale approach, in order to have the possibility to grasp at each of the levels of analysis the peculiar aspects. Tracing a path inside the state-of-the-art in the available bibliography, historically in the field of …
-
Experimental testing and finite element analysis of segmented water pipeline
… it is crucial to conduct the corresponding experimental testing and develop computational models. Hence, this PhD study aims to comprehensively investigate the mechanical responses of modified jointed DI and newly designed segmented PVCO pipelines to earthquake-induced forces through a …
-
Tessellated Structural-Architectural Systems: Experimental Testing and Interdisciplinary Student Projects
… analysis methods for RC TeSA shear walls to experimental results; and 4) Investigate how a collaborative project based on TeSA shear wall design may improve interdisciplinary competence and teamwork effectiveness of architectural and structural engineering students. To simplify the discussion …
-
Modeling, Simulation, And Experimental Testing Of A Single-Legged Hopper
… simulations validate the design, followed by experimental testing on a Speedgoat real-time machine within a Simulink environment, showing good correlation with simulations. The impact of a control parameters on average velocity are experimentally analyzed. The results demonstrate the …
-
Next generation triaxial apparatus using combined computational-experimental testing framework
This Dissertation was approved for publication on 2017-04-21 at 17:24.
-
Development and Experimental Testing of Ultrahigh-Performance Concrete Pile Foundation Elements
… Full-scale splice design, construction, and testing under flexure, shear, and tension conditions. According to the findings, the splice can provide at least 60% of the strong-axis flexural capacity. To achieve full moment capacity, the splice must be lengthened.
-
Experimental testing of pure translation and rotation loading of drag anchors
… understanding and predicting their behavior. An experimental program was devised to investigate the behavior of anchors in pure translation and rotation loading. The scaled-model anchors were embedded at a measured depth in a soil bed of clay with an undrained shear strength between 10 and 20 psf …
-
Full Scale Experimental Testing of Partially Composite Precast Concrete Sandwich Panels
… predicted panel properties to the results of the testing series. Additionally, this study evaluated the panel’s different thicknesses and lengths and compared their results.
-
Experimental Testing of an Electrical Submersible Pump Undergoing Abrasive Slurry Erosion
The Electrical Submersible Pump (ESP) manufactured by Baker Hughes, model no. WJE-1000 is designed for wells that are expected to have a high content of abrasive solids. It is a mixed flow, tandem compression type pump. Although the erosion of the pump diffuser and impeller stages are significant, …
-
Experimental Testing of Axially Loaded Fuse Plates Without Continuous Buckling Restraint
… of the plate geometry before full scale testing is performed in future studies. UR fuses with slenderness ratios near 8 had the greatest deformation capacity under cyclic loading and similar cyclic tension and compression strengths. Better cyclic performance was achieved with relatively …
-
Tire Contact Patch Characterization through Finite Element Modeling and Experimental Testing
… process. In order to validate this model, an experimental process has been developed to obtain the footprint shape and contact pressure distribution. The differences between the experimental and the simulation results are discussed and compared. The validated finite element model is then used …
-
Experimental testing of prestressed concrete girders for evaluation of stability during construction
This thesis presents the results of an experimental study focused on the measurement of elastic and inelastic properties related to the stability behavior of prestressed concrete girders utilized in bridge applications. The impetus for the study is assessing the behavior of concrete girders during …
Page 1 of 68