Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 56 for “"external heating"”.
-
Analysis of integrated heating approaches for cold-start conditions in 21700 lithium-ion battery modules using thermal system simulation
… this research studies the feasibility of heating strategies to improve cold-start performance in 21700 lithium-ion battery modules using thermal system simulation. Both experimental and simulation-based approaches were employed. At the cell level, experimental tests were conducted to …
-
Optical Design for an Open Access Trapped Ion Quantum Processor
… investigated with special attention paid to external heating rates, laser linewidths, power limitations, and laser direction. Considering all these imperfections a set of laser parameters are presented for both quenched resolved sideband cooling and electromagnetically induced transparency …
-
Review of the Applications of Microwave Heating for Asphalt Pavement Maintenance
… of microcracks through the application of external heating methods including microwave heating. This thesis provides a state of the art of application of microwave heating of asphalt pavements, including self-healing. The principles of microwave heating, components of a microwave system, …
-
The Effect of Elevated Temperatures and Speed Upon the Wear of Mild Steel
… specimens as a function of load, speed and externally - induced ambient temperatures. The pin and disc specimens used for these experiments were made from EN8steel. The variations of wear rate with load revealed wear rate transitions similar to those reported by Welsh ( 1964 ). The shape of …
-
Παρασκευή και αξιολόγηση βιοντίζελ με πρώτη ύλη την αγριαγκινάρα και την ελαιοκράμβη με τις τεχνικές της συμβατικής και της in situ μετεστεροποίησης
… studied using ultrasonication (24 kHz, without external heating) or mechanical stirring (600 rpm) at 60 ºC and NaOH as a catalyst. Also, the kinetics of rapeseed and cynara oil methanolysis process via direct sonication and mechanical stirring were studied showing that the reaction rate constant …
-
Non-Thermal Contribution to Ruthenium Photothermal Catalyst in Carbon Dioxide Methanation
… suggests a non-thermal mechanism beyond simple heating. By integrating precise temperature monitoring, studying dependence on photon energy and intensities with and without external heating, this work establishes a mechanistic framework for validating non-thermal contributions in photothermal …
-
Temperature uniformity measurements and studies of bunch parameter variations for the Advanced Wakefield Experiment, AWAKE
… components required for this system will need external heating to prevent heat-loss, and therefore temperature non-uniformity. Furthermore, using the PIC simulation OSIRIS, we study how changing size parameters of the initial proton bunch by ±5% a ects the phase-velocity of the wakefield. It is …
-
Influência dos elementos de liga na estabilidade da fase g presente em aços hp fundidos por centrifugação: avaliação por termodinâmica computacional
… temperatures around 950ºC. Burners provide the external heating and internal cooling due endothermic reform reaction. In service microstructural modifications provide less fluency resistance. The present work analyses the influence of the alloy elements in the value of the phase G obtained and …
-
Femtosecond Laser Joining of Silver Submicron/Nanoparticles
… introducing reactive oxygen gas which produces external heating to the irradiated particles through O Ag reaction on the surface of Ag particles in the hotspots. Overall, the hotspots-dependent fs laser nanojoining technique which is developed in this research provides an alternative way for …
-
Photochemical and Photothermal Reduction of Carbon Dioxide for Solar Fuels Production
… at ambient temperatures removing the need for external heating that could cause sintering, mechanical degradation and eventual catalyst deactivation and therefore improves the overall energy efficiency of the process. Additionally, we have shown that the rate of photomethanation is greatly …
-
Ignition and Extinction Behavior of Fuels in a Microcombustor
… seeks to address this limitation by using an externally heated microcombustor as an alternative fuel testing device. Mainly three combustion behaviors have been observed inside a microcombustor: strong flames at higher flow rates, Flames with Repetitive Extinction and Ignition (FREI) at …
-
The influence of thermal plasma profiles on low-frequency Alfvén eigenmode dynamics in a tokamak
… plasma as nuclear fusion products and through external heating, will be essential for any future fusion reactor. Fast particles can be expelled from the plasma through their interaction with Alfvén eigenmode (AE) instabilities. AEs can exist in gaps in the Alfvén continuum created by plasma …
-
Functional Nanomaterials for Gas-phase Heterogeneous Photocatalysis: Toward Efficient Solar Fuel Production
… localized heat energy, removing the need for external heating and improving the overall energy efficiency of the process.
-
Photothermal and Photochemical Nanostructured Catalyst Engineering Towards Efficient Solar Fuel Production
… Nb2O5 nanorod-supported Pd nanocrystals, without external heating, using visible and near infrared (NIR) light. By measuring the dependence of the RWGS reaction rates on the intensity and spectral power distribution of filtered light incident on the nanostructured Pd@Nb2O5 catalyst, we determine …
-
Coupling thermodynamic mineralogical models and mantle convection
… temperature conditions, and varying internal vs. external heating. A common feature of all the models is that the convecting flow creates a characteristic discontinuity of temperature around 660 km depth in order to compensate for the entropy change due to the phase transitions. I have studied the …
-
Limiting conditions for a sustained flame over condensed fuels : Analysis by experiments and stagnant layer theory
… to a more uniform heat flux and the influence of external heating on the critical mass flux could be better quantified. Porous gas burners have been used previously to emulate burning of condensed fuels. In this thesis, such burners were used so that mass transport at the limiting points could be …
-
Investigating the effect of magnetic nanoparticles in partial upgrading of bitumen by ultrasonic irradiation
… Conducted under mild reaction conditions, no external heating, moderate temperatures, short reaction times, and atmospheric pressure, the process proved to be both energy-efficient and practical. These findings highlight the potential of this approach as a scalable, and sustainable strategy …
-
Heat Assisted Single Point Forming of Polymer Sheets
… die. Thermoforming requires dedicated tooling, heating and vacuum systems. An alternative method is single point incremental forming, used for manufacturing parts from sheet materials without the need of dies/molds. In this process, a tool forms the sheet in a series of localized incremental …
-
Applications of Joule heating in amine-activated carbon fibers for efficient desorption in direct air CO2 capture
… mechanism of sorbent regeneration requires external heating of the sorbent, which is both slow and generally inefficient. Here, the work focuses on the use of spermine-activated carbon fibers, a novel CO2 sorbent, as their own heating element via the Joule heating effect. Porous carbon …
-
Development of Recombinase Polymerase Amplification (RPA) Assays to Diagnose Infectious Diseases
… low temperatures, alleviating the need for any external heating equipment. RPA-based diagnostics and sample preparation protocols that are appropriate for low resource settings were developed to detect Cryptosporidium, Giardia, and Entamoeba, three of the leading causes of diarrhea. The three …
Page 1 of 3