Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 8 of 8 for “"external tank"”.
-
Alternative Foam Treatments For The Space Shuttle's External Tank
… media attention to the foam products used on the External Tank (ET). In both cases, videos showed chunks of foam or ablative material falling away from the ET during lift off. This led to several years of investigation and research into the exact cause of the accident and potential solutions to …
-
Force reflecting pneumatic hand tools.
… the loppers could have an onboard, high pressure tank that could provide enough energy for average homeowner use. For commercial use a larger external tank would be required.
-
Evaluating the bonding condition of NASA spray on foam insulation using audio frequency sound absorption measurements
… on foam insulation (SOFI) used to insulate the external tank of the NASA space shuttle can be found by using the audio frequency sound absorption coefficient. The ASTM El050 standard method for sound absorption measurements was used with an open ended one inch diameter cast acrylic impedance …
-
Materials testing in hypersonic wind tunnels
… thermal protection system on the space shuttle external tank. The wedge technique was used to provide local conditions which would duplicate the thermal environment of the space shuttle during launch. These conditions were correlated with theoretical values and also compared with flight …
-
Redesign proposal for the space shuttle propellant cavity purge
… is that volume enclosing the flanges of the external tank propellant lines and the orbiter feedlines. The initial design of this cavity allowed a ground supplied helium purge to maintain a positive inert pressure within the cavity. The main problems with this design include system …
-
On computations of the integrated space shuttle flowfield using overset grids
… include a three-component overset grid--the external tank (ET), the solid rocket booster (SRB) and the orbiter (ORB), and a five-component overset grid--the ET, SRB, ORB, forward and aft attach hardware, configurations. The results were compared with the wind tunnel and flight data;In …
-
Ground based impact testing of Orbiter thermal protection system materials in support of the Columbia accident investigation
… debris was the left bipod ramp of the Shuttle external tank. This foam debris struck the Orbiter leading edge at sufficient velocity to breech the thermal protection system (TPS). During reentry at the end of the mission, the hot plasma impinged inside the Orbiter wing and aerodynamic forces …
-
Effect of microstructure of closed cell foam on strength and effective stiffness
… the forward bipod closeout on the space shuttle external tank. Three dimensional finite element simulations of closed cell foams with various microstructures are performed to study the influence of the geometric character of the microstructure (eg. defect size and distribution) on the stiffness …