Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 567 for “"extruder"”.

  1. Extruder analysis, modeling and dynamic matrix control

    <p>The Modern Plastics extruder of the Material Science and Engineering Department is used to extrude high density polyethylene (Alathon 7040). Detailed Step test transfer function models are developed where the input variables are take-up speed, screw speed, gear pump speed, and die temperature …

    utk-theses Repository record for Extruder analysis, modeling and dynamic matrix control (opens in a new tab)

  2. Prediction of extruder performance for thermoplastic materials

    … of this thesis was to predict the output of an extruder, for thermoplastic materials, by using simplified equations relating output to screw speed and screw geometry.</p><p>Three different extruders were used for this purpose and several addition-type polymers were studied. These materials …

    njit Repository record for Prediction of extruder performance for thermoplastic materials (opens in a new tab)

  3. Submicron Polymer Emulsion Inside Twin Screw Extruder

    … with high viscosity polymers inside a twin-screw extruder without the use of hazardous solvents. Its dependency on a catastrophic phase inversion makes the process knowingly sensitive to a variety of formulation and operational variables, causing a narrow window of production. The purpose of this …

    mcmaster Repository record for Submicron Polymer Emulsion Inside Twin Screw Extruder (opens in a new tab)

  4. Chemistry, morphology and rheology evolution along the extruder

    … phenomena along a co-rotating twin-screw extruder was carried out in order to enhance the understanding of reactive extrusion. A new sampling device, which allows the collection in a few seconds of small amounts of material from the melt during processing, was tested using a reactive …

    minho-thes Repository record for Chemistry, morphology and rheology evolution along the extruder (opens in a new tab)

  5. Development of a multi-purpose twin-screw extruder

    … in which mainly single process twin-screw extruders are used. This leaves a void for the development for a multi-purpose twin-screw extruder. This will enable companies to manufacture a greater diversity of products with one machine, not only in South Africa, but in the rest of Africa as …

    nwu-za Repository record for Development of a multi-purpose twin-screw extruder (opens in a new tab)

  6. SOLVENT FREE EMULSIFICATION IN A TWIN-SCREW EXTRUDER

    … in a solvent-free process within a twin screw extruder is of great industrial interest given the associated reduction in environmental impact when compared to conventional solvent-based emulsification techniques. The ability to produce latex continuously is also advantageous, compared to …

    mcmaster Repository record for SOLVENT FREE EMULSIFICATION IN A TWIN-SCREW EXTRUDER (opens in a new tab)

  7. Numerical Simulation of a Single Screw Plasticating Extruder

    … been developed for a single screw plasticating extruder. Included in the model are:</p> <p>(i) a model for the flow of polymer solids in the feed hopper,</p> <p>(ii) a variation of the Darnell and Mol model for solids flow in the extruder screw channel,</p> <p>(iii) a modification of the Tadmor …

    mcmaster Repository record for Numerical Simulation of a Single Screw Plasticating Extruder (opens in a new tab)

  8. SOLVENT-FREE EXTRUSION EMULSIFICATION INSIDE TWIN SCREW EXTRUDER

    … (100-500 nm) particles inside a twin screw extruder (TSE) without the use of hazardous solvents. SFEE has been difficult to implement in industry due to process sensitivities and a lack of mechanistic knowledge on how the polymer-water morphology must develop prior to inversion. To devise a …

    mcmaster Repository record for SOLVENT-FREE EXTRUSION EMULSIFICATION INSIDE TWIN SCREW EXTRUDER (opens in a new tab)

  9. Solvent-Free Extrusion Emulsification Inside a Twin-Screw Extruder

    … sized particles (100–200 nm) using a twin-screw extruder (TSE) with high viscosity polymers (up to 600 Pa.s has been tested to date) and only water as the liquid medium. Surfactants have always been known to play a key role in the success of the SFEE process, however very little work has been …

    mcmaster Repository record for Solvent-Free Extrusion Emulsification Inside a Twin-Screw Extruder (opens in a new tab)

  10. Extruder dynamics and control in large scale additive manufacturing

    … arise due to a lack of information about the extruder. To reduce the number of part defects, it is necessary to understand and control the extruder dynamics. A bead characterization system (BCS) was created to measure the flow rate out of the nozzle. Tests were run to excite the dynamics of …

    gatech Repository record for Extruder dynamics and control in large scale additive manufacturing (opens in a new tab)

  11. Understanding pharmaceutical wet granulation in a twin screw extruder

    … In the last decades, the twin-screw extruder has been more and more studied as a continuous method for granulation. But there are many questions remaining to be answered such as the functions of kneading block and the granulation behavior in this zone, the influence of the wetting …

    mcmaster Repository record for Understanding pharmaceutical wet granulation in a twin screw extruder (opens in a new tab)

  12. Advanced applications of numerical modelling techniques for clay extruder design.

    … manufactured using an extrusion process in auger extruders. During their long history of application in the ceramic industry, most of the design developments of extruder systems have resulted from expensive laboratory-based experimental work and field-based trial and error runs. In spite of these …

    sheffield-hallam Download PDF for Advanced applications of numerical modelling techniques for clay extruder design. (opens in a new tab)

  13. Effective control of a low-cost twin-screw food extruder

    … the ingredients. The main disadvantage of extruders available on the market today is the cost per unit. Extruders are currently manufactured in the USA, Europe and the Far East. These machines are very expensive and unaffordable for the African market. The first barrier to overcome is to …

    nwu-za Repository record for Effective control of a low-cost twin-screw food extruder (opens in a new tab)

  14. A predictive model for pressure drop in food extruder dies

    Thesis (M.S.)--Michigan State University. Department of Agricultural Engineering, 1987

    msu Repository record for A predictive model for pressure drop in food extruder dies (opens in a new tab)

  15. Dynamic Extruder Control for Polymer Printing in Big Area Additive Manufacturing

    … feed. This meant switching from a stepper motor extruder to a servo driven screw extruder. While increasing the throughput of the system, this new extruder increases the overall complexity. Effective control of the system is paramount to the success of BAAM enabling it to effectively scale in …

    ut-knoxville Repository record for Dynamic Extruder Control for Polymer Printing in Big Area Additive Manufacturing (opens in a new tab)

  16. Novel Application of Twin Screw Extruder on Production of Diverse Formulations

    Twin-screw extruder has attracted considerable attention in the pharmaceutical industry as an alternative processing instrument due to its advantages compared to other conventional equipment, such as economical processing, small footprint, reduced in-process times, solvent-free and continuous …

    mississippi Repository record for Novel Application of Twin Screw Extruder on Production of Diverse Formulations (opens in a new tab)

  17. Finite Element Simulation of Flow in Twin Screw Extruder Mixing Elements

    <p>In the plastics industry, twin screw extruders are widely used for melting, dispersing and homogenizing polymers. There are a diversity of designs employed throughout the polymer industry, each one having different operating principles and applications. Among the different arrangements of twin …

    mcmaster Repository record for Finite Element Simulation of Flow in Twin Screw Extruder Mixing Elements (opens in a new tab)

Page 1 of 29