Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 32 for “"fabrication processing"”.

  1. Fabrication, Processing, and Properties of Bulk Multiphase Metal Composites

    Multiphase metal composites were fabricated by powder metallurgy in a wide range of compositions for several applications. Copper-tantalum composites were produced both with and without the addition of a small amount of titanium and then processed by Equal Channel Angular Extrusion. The titanium …

    tamu Repository record for Fabrication, Processing, and Properties of Bulk Multiphase Metal Composites (opens in a new tab) Embargoed until 2028-05-01

  2. THERMAL POST-FABRICATION PROCESSING OF Y2O3:Tm CERAMIC SCINTILLATORS

    The effects of thermal post-fabrication processing in O2 flux on the luminescence and scintillation of Y2O3:Tm transparent ceramics were investigated. The material's microstructure, optical properties, and scintillation properties were characterized using X-ray diffraction, attenuated total …

    clemson Repository record for THERMAL POST-FABRICATION PROCESSING OF Y2O3:Tm CERAMIC SCINTILLATORS (opens in a new tab)

  3. Effect of post-fabrication processing on the tensile properties of centrifugally cast silicon carbide particulate reinforced aluminum composites

    A centrifugally cast A356 aluminum-matrix composite reinforced with silicon carbide (SiC) particles was thermo-mechanically processed by rolling and the resulting properties were studied. Tensile testing, hardness testing and optical microscopy were conducted. This study included evaluations of the …

    nps Repository record for Effect of post-fabrication processing on the tensile properties of centrifugally cast silicon carbide particulate reinforced aluminum composites (opens in a new tab)

  4. Microstructure and aging response of SiCp reinforced A356 Al metal matrix composite subject to post fabrication thermomechanical processing

    … composite was studied as a function of post-fabrication processing via transmission electron microscopy (TEM) and differential scanning caloritemetry (DSO). The effects of total rolling strain, strain per rolling pass and rolling temperature on both microstructure and precipitation behavior …

    nps Repository record for Microstructure and aging response of SiCp reinforced A356 Al metal matrix composite subject to post fabrication thermomechanical processing (opens in a new tab)

  5. DEFECTS IN GaN: AN EXPERIMENTAL STUDY

    … band bending, its origin, and the effects of fabrication processing steps are discussed in the first part of the dissertation. Experimental results indicate that spontaneous polarization does not play a predominant role in GaN band bending. An increase of surface band bending due to annealing …

    vcu Repository record for DEFECTS IN GaN: AN EXPERIMENTAL STUDY (opens in a new tab)

  6. Transparent Conductors based on Ag Nanolayer embedded in Semiconductor Oxides

    Aim of this work is the fabrication, processing and characterization of ultrathin TCO/Ag/TCO transparent electrodes. The study, is also focused on the optimization of structural, optical and electrical properties for several applications. The thesis is organized as follows: Chapter 1: it introduces …

    catania Repository record for Transparent Conductors based on Ag Nanolayer embedded in Semiconductor Oxides (opens in a new tab)

  7. Design, fabrication and characterization of RF MEMS inductors and switches

    … Initially, the background of MEMS, RF MEMS and fabrication technologies are introduced. Then switch and inductor are introduced. Theory, different configurations, designs, and fabrication technologies are considered. Finally proposed designed components are given. Each design is verified through …

    concordia Download PDF for Design, fabrication and characterization of RF MEMS inductors and switches (opens in a new tab)

  8. Synthesis, processing and morphological properties of highly porous supercritically dried mesoporous silicon nanostructures for drug delivery applications

    … solar cells etc. This thesis focuses on the fabrication, processing and characterisation of highly porous silicon nanostructures with a possible application in drug delivery. The thesis is ordered in such a manner that after introducing the motivation and all the background topics (chapter 1) …

    birmingham Download PDF for Synthesis, processing and morphological properties of highly porous supercritically dried mesoporous silicon nanostructures for drug delivery applications (opens in a new tab)

  9. A Capacitive Sensor for Continuous Monitoring of Adherent Cell Growth and Further Orthopedic Applications

    … fibroblasts. This work encompasses the design, fabrication, processing, and experimentation associated with developing a novel biosensor for in vitro implementation and is intended as a foundational platform for research. The natural continuation of this work is in the field of orthopedics, as …

    oregon Repository record for A Capacitive Sensor for Continuous Monitoring of Adherent Cell Growth and Further Orthopedic Applications (opens in a new tab) Embargoed until 2145-01-01

  10. Modeling and Simulation of Silicon Photonic Crystals Effect of Oxidation and Etching

    … must be compatible with standard silicon CMOS fabrication processing in order to achieve the integration. Since CMOS fabrication involves a myriad of process steps, it is important to study the effect of processing on photonic devices. Oxidation and etching, two fundamental processes in silicon …

    odu Repository record for Modeling and Simulation of Silicon Photonic Crystals Effect of Oxidation and Etching (opens in a new tab)

  11. Fabricating microfluidic devices in polymers for bioanalytica applications

    … presented in this document focuses on the fabrication, characterization and application of microfluidic systems fabricated in poly(methyl methacrylate) (PMMA) with the emphasis focused on the fabrication processing steps. Microfluidic devices were produced in PMMA using X-ray lithography. …

    lsu-thes Repository record for Fabricating microfluidic devices in polymers for bioanalytica applications (opens in a new tab)

  12. Selective laser melting of nickel superalloys for high temperature applications

    … The research presented investigates the SLM fabrication of three nickel superalloys: Primarily CM247LC and CMSX486/IN625 as secondary alloys. CM247LC is Ni-base superalloy hardenable by the precipitation of the coherent \(\gamma\)'phase. It presents a particular challenge due to weld-crack …

    birmingham Download PDF for Selective laser melting of nickel superalloys for high temperature applications (opens in a new tab)

  13. Material and device aspects of semiconducting two-dimensional crystals

    … This includes: 1) the optimization of device fabrication processing for better device performance, 2) comparing the device physics in 2D semiconductors based transistors and silicon MOSFET, and 3) circuit-level integration of devices using 2D semiconductors. A direct atomic layer deposition …

    purdue-thes Repository record for Material and device aspects of semiconducting two-dimensional crystals (opens in a new tab)

  14. Ablative Performance of Novel Thermal Protection System Using Dual-Layer Fiber Reinforced Composites

    … performing candidate was selected for full-scale fabrication and testing. The second stage involved fabrication, processing, and machining of six composite panels. Three control composites along with three DL systems were fabricated for evaluation. The final stage of this project was material test …

    texas-state Repository record for Ablative Performance of Novel Thermal Protection System Using Dual-Layer Fiber Reinforced Composites (opens in a new tab)

  15. Thin-Film Engineering of Solution Processable N-Type Silicon Phthalocyanines for Organic Thin-Film Transistors

    … Understanding how molecular design and thin-film fabrication conditions impact the formation, microstructure, morphology, and electronic properties of thin-films is crucial to expanding the application of organic thin-film transistors (OTFTs) in commercial electronics. Axially substituted silicon …

    ottawa-retro Repository record for Thin-Film Engineering of Solution Processable N-Type Silicon Phthalocyanines for Organic Thin-Film Transistors (opens in a new tab)

  16. Strategies for the Characterization and Virtual Testing of SLM 316L Stainless Steel

    … such as the aerospace and biomedical fields. The fabrication processing parameters selected to manufacture a given part influence the created material microstructure and the final mechanical performance of the part. Understanding the process-structure and structure-performance relationships is …

    vt Repository record for Strategies for the Characterization and Virtual Testing of SLM 316L Stainless Steel (opens in a new tab)

  17. Development of Highly Sensitive and Selective Breathing Sensors Using Molecular Imprinted Filtering for Diabetic and Alcoholic Patients

    … effective device architecture and simple fabrication processing are substantially critical. The goal of this work is to develop graphene based breathing sensors with high selectivity and sensitivity using a novel molecular imprinted filtering technique. The sensors have various …

    sdstate Repository record for Development of Highly Sensitive and Selective Breathing Sensors Using Molecular Imprinted Filtering for Diabetic and Alcoholic Patients (opens in a new tab)

  18. A Charge-Recycling Scheme and Ultra Low Voltage Self-Startup Charge Pump for Highly Energy Efficient Mixed Signal Systems-On-A-Chip

    … any external components or expensive post-fabrication processing to enable low-voltage operation. This design has been implemented in a 130-nm CMOS process. While the proposed charge pump provides significant efficiency enhancement in energy harvesters, it can also be incorporated within …

    utk-theses Repository record for A Charge-Recycling Scheme and Ultra Low Voltage Self-Startup Charge Pump for Highly Energy Efficient Mixed Signal Systems-On-A-Chip (opens in a new tab)

  19. Incorporation of 3-Dimensional ZnO Nanowire Arrays in Bulk Heterojunction Solar Cells

    … it introduces minimal changes to the standard fabrication process. Nanowires can be easily incorporated into devices by simply adding a hydrothermal growth step after the standard sol-gel ZnO spin coating process. Doing this, it is demonstrated that incorporating ZnO nanowires of carefully …

    waterloo Repository record for Incorporation of 3-Dimensional ZnO Nanowire Arrays in Bulk Heterojunction Solar Cells (opens in a new tab)

  20. Magnetically Deflectable Mems Actuators For Optical Sensing Applications

    … newly developed SERS geometry and the optimized fabrication processing techniques, two small deflection magnetic actuator beam structures were designed, fabricated, and tested. These devices utilizes an off-chip electromagnet source able to produce a magnetic force of approximately 14 μN on the …

    ucf Repository record for Magnetically Deflectable Mems Actuators For Optical Sensing Applications (opens in a new tab)

Page 1 of 2