Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 369 for “"failure criterion"”.
-
A failure criterion for fillet welds
… have a lower strength than when under tension. Failure of the fillet weld is initiated at the weld root, the important factor controlling the initiation being weld ductility. The greater the residual stress, the lower the weld ductility and ultimate strength. Thermal stress relieving increases …
-
Anisotropic tensile probabilistic failure criterion for composites
A probabilistic failure criterion is needed to quantitatively predict reliability in critical applications, such as man-safe, deep-sea and air structures, and as an objective function for use in optimum design. Composites are multi-phased and anisotropic, which gives rise to failure in different …
-
Composite failure criterion - probabilistic formulation and geometric interpretation.
… the reliability and the associated probabilistic failure criterion for composite materials under combined stress. In the analytical derivation, the concept of joint probability was used and applied to the Weibull distribution function. In applications, given the experimental measurements of the …
-
Tensile strength and failure criterion of analog lithophysal rock
… strength of lithophysal analog rock and presents failure criteria that can be used by geotechnical engineers to evaluate underground structures in rock. The physical and mechanical properties that are related to the failure criterion, such as porosity, compressive strength and modulus of …
-
A micromechanics-based independent mode failure criterion for fiber-reinforced composites
Thesis (M.S.)--Michigan State University. Department of Material Science and Mechanics, 1994
-
Strain energy density based failure criterion for GFRP coupons under tension and bending
Accurate prediction of failure strength is one of the major concerns in the design of fabric reinforced polymer composites. Though there are numerous failure criteria available, each criterion suits particular test data, and also lack of critical experimental results makes it difficult to assess …
-
Development of a Failure Criterion for Rock Masses Having Non-Orthogonal Fracture Systems
… by extending an existing rock mass strength criterion. These criteria incorporate the effects of the intermediate principal stress, minimum principal stress and the anisotropy resulting from these stresses acting on the fracture system. In addition, these criteria have the capability of …
-
Predicting the dynamic fracture of steel via a non-local strain-energy density failure criterion
… physical testing. In response to this, a failure criterion was created based on the strain energy density (SED) in the material. Calculations to obtain the SED were developed to take advantage of a non-local length scale, wherein the sensitivity to mesh density was partially reduced. This …
-
DEVELOPMENT OF A NEW FATIGUE FAILURE CRITERION USING OPTICAL FLOW-BASED MULTI-GAUGE LENGTH APPROACH
Thesis (Ph.D.)--Michigan State University. Civil Engineering - Doctor of Philosophy, 2025
-
TESTING, ASSESSMENT, AND FAILURE PREDICTION USING THE UNIFIED FAILURE CRITERION FOR TENSILE, BENDING, AND COMBINED LOADING IN 3D-PRINTED SPECIMENS
This study evaluates the Unified Failure Criterion (UFC) for predicting failure under tensile, bending, and combined loading conditions using additively manufactured (AM) polylactic acid (PLA) specimens. The UFC requires two simultaneous conditions for failure, a stress condition and a stress …
-
Failure criterion of a multi-layered glass-fiber-reinforced-epoxy composite materials and the applicability of the stress field theory
Thesis (M.S.)--Michigan State University. Department of Metallurgy, Mechanics, and Material Science, 1983
-
A Foundation for Redefining the Failure Criterion for Tristructural Isotropic Particle Fuel based on the Mechanical Impact of Fission Product Chemical Attack on Silicon Carbide
… in-situ experiments and is associated with the failure sites in the SiC layer. Present day Pd failure models for TRISO particle fuel, particularly in BISON, are too extreme and fail to capture many aspects about the phenomenon. Through the use of BISON, Pd chemical attack is emulated via …
-
An Intelligible Software (CFA) Approach for Fiber-Reinforced Laminate Failure Analysis Including a Piecewise Representation of the Tsai-Wu Failure Criterion Using Excel and MatLab
… analyzing its structural limits. Therefore, the failure criteria used to specify an FRL's failure limits are significant. Although useful formulaic methods have been developed for analyzing fiber-reinforced laminates, these calculations can be quite tedious when used in an iterative structural …
-
Reliability Analysis of Low-Silver BGA Solder Joints Using Four Failure Criteria
The appropriate selection of failure criterion for solder joint studies is necessary to correctly estimate reliability life. The objective of this study is to compare the effect of different failure criteria on the reliability life estimation. The four failure criteria in this study are a 20% …
-
Thermo-Mechanical Responses For Porous-Permeable Media With Applications To Underground Coal Gasification.
… A two-dimensional thermo-mechanical failure criterion, including the effects of crack-closure, is developed by deriving crack-tip stress magnitudes and applying Griffith's approach. A generalized form of two-dimensional Griffith failure criterion is viii obtained by combining the …
-
Analysis of stress singularity of adhered contacts in MEMS
… are formed at the junction of two materials. Failure occurs at adhered contacts because of biomaterial stress singularities at interface comers. Magnitude of the stress field induced due to this singularity is given by the value of the notch stress intensity. Hence it becomes very important to …
-
A Progressive Damage Methodology for Residual Strength Predictions of Center-Crack Tension Composite Panels
… in-flight accident such as an uncontained engine failure. An experimental characterization of several composite materials systems revealed an R-curve type of behavior. Fractographic examinations led to the postulate that this crack growth resistance could be due to fiber bridging, defined here as …
-
Shear Strength of A Cohesionless Soil Under Plane Strain and Triaxial Conditions
… stress on the angle of shearing resistance of failure, the shear characteristics and the failure criterion. The Mohr-Coulomb theory was used as a failure criterion. The angle of shearing resistance at failure in plane strain tests was higher than in triaxial tests. Shear strength values at …
Page 1 of 19