Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 1117 for “"failure mode"”.

  1. Fibre rupture failure mode of FRP spike anchors

    … design methodology is to identify the different failure modes that the anchors may exhibit, depending on the anchor part that fails. Initial efforts have been made to identify the possible failure modes of straight anchors (Ozbakkaloglu & Saatcioglu 2009; Kim & Smith 2009) and failure modes …

    auckland-ms Repository record for Fibre rupture failure mode of FRP spike anchors (opens in a new tab)

  2. Failure-mode Scale-transitions in Reinforced Concrete Structures

    L'abstract è presente nell'allegato / the abstract is in the attachment

    poli-torino Repository record for Failure-mode Scale-transitions in Reinforced Concrete Structures (opens in a new tab)

  3. Potential Failure Mode Analysis for Mineral Extraction Near Reservoirs

    … a methodology to determine potential seepage failure modes due to changes in hydraulic conductivity in overburden, caused by underground coal mining. The research is separated into four tasks: 1) literature review of mine subsidence prediction and empirical assessment, 2) a method to develop …

    wvu Repository record for Potential Failure Mode Analysis for Mineral Extraction Near Reservoirs (opens in a new tab)

  4. Failure Mode Identifications Of Rc Beams Externally Strengthened With

    … the reinforced concrete beams and compare their failure modes. The main goal is to determine the CFRP design on the reinforced concrete beams that result in a progressive and gradual failure mode with enough warning before final failure. Different CFRP designs are investigated and compared with …

    ucf Repository record for Failure Mode Identifications Of Rc Beams Externally Strengthened With (opens in a new tab)

  5. Characterization and Failure Mode Analysis of Cascode GaN HEMT

    … GaN HEMT, an accurate behavior-level simulation model is developed in this thesis. The packaging related parasitic inductance, including both self-inductance and mutual-inductance, are extracted based on finite element analysis (FEA) methods. Then the accuracy of the simulation model is verified …

    vt Repository record for Characterization and Failure Mode Analysis of Cascode GaN HEMT (opens in a new tab)

  6. Load-Carrying Capacity and Failure Mode Analysis of Timber Rivet Connections

    Different brittle, mixed and ductile failure modes of timber connections have long been observed by wood researchers. The wood engineering community has dedicated a significant amount of effort over the last decades to establish a reliable predictive model to determine the capacity of timber …

    auckland-ms Repository record for Load-Carrying Capacity and Failure Mode Analysis of Timber Rivet Connections (opens in a new tab)

  7. Failure mode transition for rock cutting: theoretical, numerical and experimental modelling

    … the interaction between rock and cutter is to model the cutting forces. When the depth of cut is small, cutting forces show a linear relationship against the depth of cut, indicating a ductile-dominant failure mode. As the depth of cut increases, the rock cutting failure shifts from …

    adelaide Repository record for Failure mode transition for rock cutting: theoretical, numerical and experimental modelling (opens in a new tab)

  8. Failure Mode of an Orthodontic Resin Alone and with Bonded Brackets

    … is inadequate in understanding bonded bracket failure. With the introduction of a high strain rate test as well as fracture analysis, bonded bracket retention can be better understood.

    loma-linda Repository record for Failure Mode of an Orthodontic Resin Alone and with Bonded Brackets (opens in a new tab)

  9. Failure Mode Effects Analysis of Auto-verification in the Clinical Laboratory

    … the risks and benefits of auto-verification. Failure Mode Effect Analysis is used to describe and characterize the risks associated with common clinical laboratory practices. Prothombin Time (PT) is used to illustrate a variety of parameters to be considered before implementing …

    dominican Repository record for Failure Mode Effects Analysis of Auto-verification in the Clinical Laboratory (opens in a new tab)

  10. Critical failure mode analysis of the Petite Amateur Navy Satellite (PANSAT)

    … analysis obligation by investigating spacecraft failure modes. Typically referenced as critical failure modes, these events will cause complete and permanent system failure. A reliability analysis tool, called Fault Tree Analysis (FTA), is used to conduct a systematic review of current hardware …

    nps Repository record for Critical failure mode analysis of the Petite Amateur Navy Satellite (PANSAT) (opens in a new tab)

  11. Dynamic Risk Analysis of Construction Delays Using Fuzzy-Failure Mode Effects Analysis

    … The next contribution of the research is a model that is capable of predicting the percentage of delay based on the “fuzzy risk priority number”. This model uses the output of the aforementioned fuzzy inference system to make a prediction about the percentage of delay. The model was tested …

    unlv Repository record for Dynamic Risk Analysis of Construction Delays Using Fuzzy-Failure Mode Effects Analysis (opens in a new tab) Download PDF for Dynamic Risk Analysis of Construction Delays Using Fuzzy-Failure Mode Effects Analysis (opens in a new tab)

  12. Far-Field Ground Strain Failure Mode Assessment for Mineral Extraction Near Dams

    … far-field ground strains which initiate strain failure modes for cross valley dams. The Ryerson Station Dam breach in 2005 brought attention to the possibility of increased hazard to dams due to far-field ground strain phenomena from underground mining.;The mapping study found that three United …

    wvu Repository record for Far-Field Ground Strain Failure Mode Assessment for Mineral Extraction Near Dams (opens in a new tab)

  13. A systematic approach to failure mode characterisation in a complex sociotechnical context

    … through identifying and correcting product failure modes, and demonstrating product reliability in line with customers’ requirements, it drives many of the design and development activities of a business. If a products usage or failure mechanisms aren’t fully characterised, the effectiveness …

    bristol Repository record for A systematic approach to failure mode characterisation in a complex sociotechnical context (opens in a new tab) Download PDF for A systematic approach to failure mode characterisation in a complex sociotechnical context (opens in a new tab)

  14. The Development of a Manufacturing Failure Mode Avoidance Framework for Aerospace Manufacturing

    … through the prevention of identified potential failure modes that is based on the principles of the existing Failure Mode Avoidance framework used for automotive system design. The tools and techniques that exist in the literature are reviewed in order to understand the best practice, and …

    bradford Repository record for The Development of a Manufacturing Failure Mode Avoidance Framework for Aerospace Manufacturing (opens in a new tab)

  15. Important systems engineering analysis tools : failure mode and effects analysis and hazard analysis

    … achieve those objectives are Hazard Analysis and Failure Modes and Effects Analysis. Sometimes seen strictly as Safety and Reliability tasks, these analyses are key to a successful program or project and require input from all stakeholders. When viewed in the Systems Engineering process, Safety …

    texas Repository record for Important systems engineering analysis tools : failure mode and effects analysis and hazard analysis (opens in a new tab)

  16. The identification and modelling of the dominant failure mode in hot forging tooling

    The aim of the thesis is the identification and modelling of the dominant failure mode in hot forging tooling, used in the production of nickel based superalloy compressor blades. A preliminary study identified the most frequently occurring part defects that cause tool failure. The forming process …

    strathclyde Repository record for The identification and modelling of the dominant failure mode in hot forging tooling (opens in a new tab)

  17. Risk Analysis for Supplier Selection Problem using Failure Mode and Effects Analysis (FMEA)

    … Multi Criteria Decision Making (MCDM) and Failure Mode and Effects Analysis (FMEA), a systematical and comprehensive literature research was conducted. Moreover, interviews with purchasing managers were performed at a major chemical product manufacture. In this work, an FMEA risk analysis …

    concordia Download PDF for Risk Analysis for Supplier Selection Problem using Failure Mode and Effects Analysis (FMEA) (opens in a new tab)

Page 1 of 56