Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 5 of 5 for “"failure mode transition"”.
-
Failure mode transition for rock cutting: theoretical, numerical and experimental modelling
… the interaction between rock and cutter is to model the cutting forces. When the depth of cut is small, cutting forces show a linear relationship against the depth of cut, indicating a ductile-dominant failure mode. As the depth of cut increases, the rock cutting failure shifts from …
-
Effects of Metallic Coatings on Resistance Spot Weldability of Hot Stamping Steel
… peak load for tensile shear loading in static mode was similar for the AlSi and galvannealed coated sheets, there were significant differences in failure mode transition characteristics and energy absorption capabilities associated with the different coatings. Moreover, it was found that joints …
-
Finite Element Analysis of Thermoviscoplastic Deformations of an Impact-Loaded Prenotched Plate
… the Bodner-Partom and the power law are used to model the thermoviscoplastic response of a material. Each one of these relations accounts for strain hardening, strain-rate hardening and thermal softening of the material. The material parameters in these relations are found by solving an …
-
Numerical Simulation of Adiabatic Shear Bands and Crack Propagation in Thermoviscoplastic Materials
… of · and that for such materials an adiabatic model may not be adequate. The effects of initial defect strength and the nominal strain-rates are both found to be consistent with simple shearing studies except that the ASB propagation speed was found to decrease with increasing nominal …
-
Seismic Vulnerability Assessment of Existing Reinforced Concrete Frame Structures: A Failure Mode-Based Approach
… vulnerabilities in existing older-type and modern reinforced concrete (RC) frame structures. By mid-2017, the New Zealand parliament approved the Building Amendment Act 2016 which set new requirements for managing earthquake-prone structures. However, owing to a lack of sufficient knowledge …