Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 81 for “"fast reactors"”.

  1. Development of thermodynamic cycles for sodium-cooled-fast reactors.

    … concepts and the performance of these reactors-concepts depends on their design, it is reasonable to start with all GEN-IV reactor concepts and investigate the coolants and their characteristics in these concepts. For this objective, main thermophysical, corrosion, and neutronic …

    uoit Repository record for Development of thermodynamic cycles for sodium-cooled-fast reactors. (opens in a new tab)

  2. Antineutrino-based safeguards for ultra-high burnup fast reactors

    … experience of antineutrino detectors near reactors has increased to the point where monitoring the reactor's power level and progression through its burnup cycle has become possible. With the expected increase in world nuclear energy capacity, including the dissemination of reactor …

    gatech Repository record for Antineutrino-based safeguards for ultra-high burnup fast reactors (opens in a new tab)

  3. In Core Fuel Management Studies of Large Fast Reactors

    Made available in DSpace on 2014-12-11T17:26:06Z (GMT). No. of bitstreams: 1 7219938.pdf: 3339213 bytes, checksum: aaf2806d617fa53402a2c3513b799462 (MD5) Previous issue date: 1972

    uiuc Repository record for In Core Fuel Management Studies of Large Fast Reactors (opens in a new tab)

  4. ANALYSIS OF AUTONOMOUS LOAD FOLLOWING (ALF) IN ADVANCED FAST REACTORS

    The autonomous load following (ALF) properties of fast-spectrum nuclear reactors offer great potential for increased electric grid stability, reduction in control rod mechanism wear, and less operator action for small power transients experienced on a daily basis. These features can result in …

    nps Repository record for ANALYSIS OF AUTONOMOUS LOAD FOLLOWING (ALF) IN ADVANCED FAST REACTORS (opens in a new tab)

  5. Reactivity Effects Due to Isotope Concentration Changes in Fast Reactors

    Made available in DSpace on 2017-07-06T18:55:51Z (GMT). No. of bitstreams: 2 Peters_John_R_MS.pdf: 38930475 bytes, checksum: 3c882d1f1b96072afa93e6823067e570 (MD5) license.txt: 4813 bytes, checksum: 715c4321821a960fa1a1e91d2ac7ebce (MD5) Previous issue date: 1983

    uiuc Repository record for Reactivity Effects Due to Isotope Concentration Changes in Fast Reactors (opens in a new tab)

  6. Evaluation of reactivity feedbacks due to core deformation in fast reactors

    … power for electricity production. Sodium-cooled fast reactor (SFR) is one of the most promising candidate among those reactor concepts for both energy production and minimizing radioactive nuclear waste and features inherent safety potential. To ensure inherent safety characteristics of SFR, …

    purdue-thes Repository record for Evaluation of reactivity feedbacks due to core deformation in fast reactors (opens in a new tab)

  7. Multigroup, Spatially Dependent Studies of Mild Excursions in Large Fast Reactors

    Made available in DSpace on 2014-12-11T17:26:05Z (GMT). No. of bitstreams: 1 7121211.pdf: 4419876 bytes, checksum: 0f7b829cc1bb034c93001e952ce2ebfa (MD5) Previous issue date: 1971

    uiuc Repository record for Multigroup, Spatially Dependent Studies of Mild Excursions in Large Fast Reactors (opens in a new tab)

  8. Development of advanced methods for safety assessment of sodium cooled fast reactors

    … of various actinides produced in Light Water Reactors (LWRs). Sodium Fast Reactors (SFRs) are thus becoming more attractive since they are known to be very efficient to transmute long-lived radionuclides present in spent fuel. However, the current simulation tools (thermal-hydraulics code with …

    qucosa-diss

  9. Development of Metallic Fuel Additives and Alloys for Sodium-cooled Fast Reactors

    The major goal of the work is to develop effective additives for U-10Zr (wt.%) metallic fuel to mitigate the fuel-cladding chemical interactions (FCCIs) due to fission product lanthanides and to optimize the fuel phase mainly by lowering the gamma-onset temperature. The additives Sb, Mo, Nb, and Ti …

    vt Repository record for Development of Metallic Fuel Additives and Alloys for Sodium-cooled Fast Reactors (opens in a new tab)

  10. Hot Extrusion of Alpha Phase Uranium-Zirconium Alloys for TRU Burning Fast Reactors

    The development of fast reactor systems capable of burning recycled transuranic (TRU) isotopes has been underway for decades at various levels of activity. These systems could significantly alleviate nuclear waste storage liabilities by consuming the long-lived isotopes of plutonium (Pu), neptunium …

    tamu Repository record for Hot Extrusion of Alpha Phase Uranium-Zirconium Alloys for TRU Burning Fast Reactors (opens in a new tab)

  11. Comparisons of Transport and Diffusion Theory Calculations of Performancecharacteristics for Large Fast Reactors

    Made available in DSpace on 2014-12-11T17:26:01Z (GMT). No. of bitstreams: 1 7105217.pdf: 5163120 bytes, checksum: d6b149182da08b0eaafee8cb4aae9f1d (MD5) Previous issue date: 1970

    uiuc Repository record for Comparisons of Transport and Diffusion Theory Calculations of Performancecharacteristics for Large Fast Reactors (opens in a new tab)

  12. Assessment of alloy 709 accelerated creep properties for use in sodium cooled fast reactors

    The high temperature mechanical properties and microstructural development of Alloy 709 were investigated from temperatures ranging from 550 to 650 °C. Constant load creep, stress dip, and stress relaxation tests were carried out to determine the minimum creep rate exponent and activation volume, …

    colo-mines Repository record for Assessment of alloy 709 accelerated creep properties for use in sodium cooled fast reactors (opens in a new tab)

  13. Characterization of Uranium Carbide Microspheres In An Inert Zirconium Carbide Matrix For Gas Fast Reactors

    … of an advanced nuclear fuel for Gas Fast reactors has been studied. Portions of a dispersion/composite fuel involving Uranium Carbide (UC) and Zirconium Carbide (ZrC) have been characterized and studied. Uranium carbide (UC) microspheres produced in the USC-Nuclear Materials …

    south-carolina Repository record for Characterization of Uranium Carbide Microspheres In An Inert Zirconium Carbide Matrix For Gas Fast Reactors (opens in a new tab)

  14. Applying a nodal diffusion-micro depletion sequence for high-fidelity analysis of sodium cooled fast reactors

    … Reactor (ABR), a sodium cooled, metal fuel fast reactor system that uses spent fuel from current light water reactors as part of its energy source. Due to the complex nature of nuclear reactors, extensive modeling of a system must be performed in order to demonstrate the viability of such …

    gatech Repository record for Applying a nodal diffusion-micro depletion sequence for high-fidelity analysis of sodium cooled fast reactors (opens in a new tab)

  15. Benchmark description of an advanced burner test reactor and verification of COMET for whole core criticality analysis in fast reactors

    … Reactor design. This reactor is a sodium cooled fast reactor designed to burn recycled fuel to generate power while transmuting long term waste. The specification includes heterogeneity at both the assembly and core levels while the geometry and material compositions are both fully described. …

    gatech Repository record for Benchmark description of an advanced burner test reactor and verification of COMET for whole core criticality analysis in fast reactors (opens in a new tab)

  16. The Extinction Probabilities of Nuclear Assemblies: A Sensitivity Study

    … examples of interest to the consideration of fast reactors near start-up time will also be considered. In addition to providing situation-specific information regarding input parameter influence on the start-up behavior of fast reactors, the primary goal of this work is to maximize the …

    uiuc Repository record for The Extinction Probabilities of Nuclear Assemblies: A Sensitivity Study (opens in a new tab)

Page 1 of 5