Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 242 for “"fatigue cracks"”.

  1. Closure of fatigue cracks at high strains

    … specimens to study the closure behavior of short cracks at high cyclic strains under completely reversed cycling. Testing procedures and methodology, and closure measurement techniques, are described in detail. The strain levels chosen for the study cover from predominantly elastic to grossly …

    vt Repository record for Closure of fatigue cracks at high strains (opens in a new tab)

  2. Acoustic-Emission Monitoring of Lap Joint Fatigue Cracks

    … presents a novel approach to detect and analyze fatigue induced cracks in various test specimens using Piezoelectric Wafer Active Sensors. This approach is widely used in Structural Health Monitoring applications involving acoustic emissions that can be captured using PWAS which in turn gives the …

    south-carolina Repository record for Acoustic-Emission Monitoring of Lap Joint Fatigue Cracks (opens in a new tab)

  3. Evaluation of surface fatigue cracks using Rayleigh waves

    … scattering model for a planar distribution of cracks in an infinite space is derived based on the generalized reciprocity and Kino's scattering formalism. Subsequently, an acoustic scattering model of Rayleigh waves for a linear distribution of surface cracks in a half space in the form of the …

    nebraska Repository record for Evaluation of surface fatigue cracks using Rayleigh waves (opens in a new tab)

  4. Acoustic emission from spectrum fatigue cracks in 7075 aluminum

    … Navy aircraft, has experienced problems with fatigue cracks in its wings. This problem was studied in the laboratory using a representative specimen under simulated flight loading. Acoustic emission monitoring was used to detect the stress pulses emitted during cracking. A new wave analysis …

    nps Repository record for Acoustic emission from spectrum fatigue cracks in 7075 aluminum (opens in a new tab)

  5. The microstructural evolution of fatigue cracks in FCC metals

    The microstructural evolution during fatigue crack propagation was investigated in a variety of planar and wavy slip FCC metals. The planar materials included Haynes 230, Nitronic 40, and 316 stainless steel, and the wavy materials included pure nickel and pure copper. Three different sets of …

    uiuc Repository record for The microstructural evolution of fatigue cracks in FCC metals (opens in a new tab)

  6. Investigation of strain distribution around fatigue cracks in aluminum sheets

    … investigation of the strain distribution around fatigue cracks in flat aluminum sheets was conducted by Lt. E. B. Tucker, USN, at the Aeronautical Engineering Department of the U. S. Naval Postgraduate School, Monterey, California. Crack propagation was produced by constant stress reverse …

    nps Repository record for Investigation of strain distribution around fatigue cracks in aluminum sheets (opens in a new tab)

  7. Nonlinear ultrasonic phased array imaging of partially-closed fatigue cracks

    … challenging (nonlinear) defects such as small fatigue cracks in the early stages or partially- or fully- closed cracks. Small cracks may be undetected or sizes of closed cracks maybe underestimated. The aim of this research is to obtain images of the closed part of a fatigue crack using the …

    gatech Repository record for Nonlinear ultrasonic phased array imaging of partially-closed fatigue cracks (opens in a new tab)

  8. A study on the influence of microstructure on small fatigue cracks

    … The formation and early growth of fatigue cracks in the high cycle fatigue regime lasts for much of the fatigue life, and it is strongly influenced by microstructural features such as grain size, twins and morphological and crystallographic texture. However, most fatigue models do …

    gatech Repository record for A study on the influence of microstructure on small fatigue cracks (opens in a new tab)

  9. Analytical Investigation of Repair Methods for Fatigue Cracks in Steel Bridges

    … have been used to stop distortion-induced fatigue cracks from initiating and propagating in steel bridges. Some decrease stiffness in the web gap region to transfer the load path to an area of higher stiffness, while others increase the stiffness of the region to increase the capacity of …

    ku Repository record for Analytical Investigation of Repair Methods for Fatigue Cracks in Steel Bridges (opens in a new tab)

  10. The growth of short fatigue cracks in a medium carbon steel.

    … carbon steel which were subjected to push-pull fatigue testing at ambient temperature. Crack lengths were measured from replicas using an optical microscope from which the growth rate could be calculated. A theory for short crack growth is presented which may be expressed mathematically by the …

    whiterose Download PDF for The growth of short fatigue cracks in a medium carbon steel. (opens in a new tab)

  11. The Influence of Stress on the Detectability of Fatigue Cracks using Ultrasonics

    Under favourable conditions fatigue cracks can be readily detected by a variety of ultrasonic techniques. There are indications, however, that compressive stresses can render the detection of these cracks very difficult, if not impossible. The factors which influence the detection of both stressed …

    aston Repository record for The Influence of Stress on the Detectability of Fatigue Cracks using Ultrasonics (opens in a new tab) Download PDF for The Influence of Stress on the Detectability of Fatigue Cracks using Ultrasonics (opens in a new tab)

  12. Monitoring Fatigue Cracks in Steel Bridges using Advanced Structural Health Monitoring Technologies

    Fatigue cracks that develop in steel highway bridges under repetitive traffic loads are one of the major mechanisms that degrades structural integrity. If bridges are not appropriately inspected and maintained, fatigue cracks can eventually lead to catastrophic failures, in particular for …

    ku Repository record for Monitoring Fatigue Cracks in Steel Bridges using Advanced Structural Health Monitoring Technologies (opens in a new tab)

  13. Geometrically Explicit Finite Element Modeling Of Aa7075-T651 Microstructure With Fatigue Cracks

    … explicit approach to finite element modeling fatigue at the microstructural length scale. Each paper is a study within this thrust, and the following is a sweeping overview of each study. More detailed abstracts for each paper are given at the beginning of each chapter. The paper in the first …

    cornell Repository record for Geometrically Explicit Finite Element Modeling Of Aa7075-T651 Microstructure With Fatigue Cracks (opens in a new tab)

  14. Influence of Microstructure on the Propagation of Fatigue Cracks in Inconel 617

    … the fluctuations in stress and temperature, the fatigue behavior of the material is important to understand. The goal of this study was to determine the influences of the microstructure during fatigue crack propagation. For this investigation, Inconel 617 compact tension samples, fatigue tested …

    boise Repository record for Influence of Microstructure on the Propagation of Fatigue Cracks in Inconel 617 (opens in a new tab)

  15. ACOUSTIC EMISSION-BASED STRUCTURAL HEALTH MANAGEMENT AND PROGNOSTICS SUBJECT TO SMALL FATIGUE CRACKS

    … applications for locating and monitoring fatigue cracks during SHM and prognosis. The research presented in this dissertation focuses on the structural health monitoring using AE. In this research a correlation between AE signal characteristics and crack growth behavior is established, and …

    maryland Repository record for ACOUSTIC EMISSION-BASED STRUCTURAL HEALTH MANAGEMENT AND PROGNOSTICS SUBJECT TO SMALL FATIGUE CRACKS (opens in a new tab)

  16. Analysis of acoustic emission waveforms from fatigue cracks on a steel bridge hanger

    Fatigue cracks on a steel bridge hanger were monitored for acoustic emission in conjunction with strain gage monitoring. Waveforms of emissions were collected and classified using source location, strain magnitude, position on strain cycle and uniqueness of waveforms as the primary criteria. A vast …

    vt Repository record for Analysis of acoustic emission waveforms from fatigue cracks on a steel bridge hanger (opens in a new tab)

Page 1 of 13