Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 49 for “"fatigue process"”.
-
A study of the effect of surface deformation on the fatigue process in copper
Thesis (M.S.)--Michigan State University of Agriculture and Applied Science. Dept. of Metallurgical Engineering, 1961
-
A study of fatigue failure in vulcanized rubber
Some aspects of fatigue failure in rubbers have been examined. Scanning electron micrographs of the surface exposed by the failure confirm the incremental, crack-propagation nature, of the fatigue process. Many other features of the failure surface have been identified and related to this process. …
-
Fadiga e fratura da superliga à base de níquel, Inconel 625, submetida a razão de carga R = -1
The fatigue process in materials is the failure mechanism with the presence of cyclic stresses. Surface flaws and stress concentrators may lead to nucleation of cracks during this process. The cracks propagate and cause component fracture after a sufficient number of cycles. This failure mechanism …
-
An automated monitoring system for the production and measurement of metal fatigue
New equipment for producing and following the fatigue process, in metals, has been developed. The specimens, which must be in the shape of tuning forks, are resonated at high amplitudes. This is achieved by attaching small, powerful, samarium-cobalt magnets to the ends of the tynes, enabling them …
-
The effect of cyclic fatigue on the hardness of new NiTi endodontic files : a nanoindentation study
… study was to compare the flexibility and cyclic fatigue of ProTaper Universal (PTU; Dentsply Tulsa Dental Specialties, Tulsa, OK) and ProTaper Gold (PTG; Dentsply Tulsa Dental Specialties, Tulsa, OK) in relation to their phase transformation behavior, as well as to determine the effect of cyclic …
-
The Competing Roles of Microstructure and Flaw Size on the Fatigue Limit of Metals
… of an analytical model that addresses the fatigue process, namely the threshold condition of non-propagating cracks. Two parameters are identified to govern the fatigue resistance: non-propagating crack size and crack barrier strength. The concept of three defect types associated with three …
-
Effect of relative humidity on the fatigue characteristics of mild steel in reversed torsion
Reversed torsion fatigue tests were conducted on both notched and unnotched specimens of SAE 1018 steel. The tests were made on a Sonntag Universal Fatigue Testing Machine at the rate of 1800 stress cycles per minute. The notched specimens were fatigued in air of zero-five percent relative humidity …
-
Effects of a bi-directional pedal pattern on fatigue in cycling
… of forward and backward pedaling), on the process of fatigue in cycling. Thirty-three subjects participated in this study (18 trained, age 31.4±11.1 years, average 9.6±9.7 years training; 15 untrained, age 28.6±11.3 years). Subjects participated in four sessions on different days: a maximum …
-
Fatigue Performance of Adhesive Joints in Timber Wind Turbine Towers - A study to evaluate the fatigue performance of adhesive joints in timber connections
Fatigue is a process which weakens a material over time under variable load. For some materials, the fatigue process is known and studied and thus the damage accumulation can be predicted and taken well into consideration when designing construction elements. For materials like steel, these …
-
An investigation into tool-wear and phenomena influencing tool-life in milling
… from both the discontinuous nature of the process and the varying chip thickness during cut, are the reason for reduced research interest in comparison to turning. Although several researchers have examined the milling process, considerable controversy still surrounds the basic factors …
-
Factors Affecting the Durability of 5.25 Inch Floppy Diskette Media and its Mechanisms of Wear
… that the mechanisms of wear are related to a fatigue process. Some surprises have been noted in respect of the value of burnishing compared to the observations made elsewhere. Good reasons for these observed differences have been noted, however, and it will be shown that these are merely …
-
Effect of aqueous environments on the fatigue behavior of 90-10 copper nickel
Fatigue tests on compact tension specimens of 90-10 copper nickel were conducted in 3.5% NaCl solutions. Anodic or cathodic currents were applied during testing. Anodic currents decreased and cathodic currents increased the fatigue life. Both anodic and cathodic currents changed the fracture mode …
-
Damage, Tension/Compression Asymmetry and Inferred Crack Growth in Fatigue title of Aluminum Alloys
… to 1 (failed) is a well-established concept. In fatigue tests, where a given load cycle is repeated until failure, it is common to define damage D per cycle as the fraction of total life consumed per cycle, or 1/Nf. We begin by using Maximum Entropy method to develop a curve to model the life vs. …
-
Design optimization of structures subjected to stochastic excitations
… Furthermore, the study investigates the fatigue lifetime prediction of structures under stochastic dynamic loading. Finally, the design optimization framework is extended to incorporate performance functions related to fatigue lifetime of structures subject to stochastic dynamic loading. …
-
Changes in Electromyographic Activity in Human Muscle Fatigue
… (EMG) activity with maximal contractions during fatigue. The specific hypothesis was that this reduction in EMG activity results from reflex inhibition of homonymous motoneurons by afferents from the fatigued muscles. The experiments were conducted on the human ankle dorsiflexor and plantarflexor …
-
Cyclic Deformation of Low-Carbon Iron
… and the microstructural changes preceeding fatigue fracture have been investigated in ferrous systems subjected to controlled cyclic straining. Attention has been focussed on three basic aspects of the fatigue process:</p> <p>(1) The Bauschinger Effect and the Polarisation of Plastic Flow in …
-
Multi-scale Modeling in Novel Materials Design
… design at its core. Understanding the physical processes dictating mechanical properties is crucial for accurate material design. Traditionally, this involved costly experimentation to test materials under various conditions such as static loading, fatigue loading, or thermal irradiation. On the …
-
Thermodynamic Approach to Fatigue Failure Analysis in Metals and Composite Materials
Fatigue is a dissipative process and must obey the laws of thermodynamics. In general, it can be hypothesized that the degradation of machinery components is a consequence of irreversible thermodynamic processes that disorder a component, and that degradation is a time dependent phenomenon with …
-
Application of Direct Tension Testing to Field Samples to Investigate the Effects of HMA Aging
There are many factors which contribute to fatigue failure in HMA. While studies have been made with respect to binder aging, little has been done to investigate the effect of aging on the fatigue failure of asphalt mixtures. The lack of an effective and efficient method of testing field samples …
-
Influence of spatial variations of railroad track stiffness and material inclusions on fatigue life
… rail bending and potential deterioration due to fatigue crack initiation and propagation. Previous research for prediction of fatigue life has been done under the assumptions of a uniform track bed and a homogeneous rail. However the spatial variation of the track stiffness is expected to …
Page 1 of 3