Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 428 for “"fatigue tests"”.
-
Fatigue tests of axially loaded K-joints
… axially loaded, simple K-joints to failure in fatigue. Each K-joint had a 2" diameter chord, a 18" diameter 3° branch and a 12 3/4" 9° branch. Measures were taken to ensure axial forces with little bending in both branches. This was accomplished using a specially designed load frame with …
-
Push-out fatigue tests of the Alternate Shear Connector
… its static strength and behavior using push-out tests with variables such as hole diameter, hole spacing, and the presence of reinforcement in the holes. Composite beam tests, which consisted of service and ultimate load tests, were also performed to determine the effectiveness of the connector …
-
Post-Injection Welded Joint Fatigue Tests of Sandwich Plate System Panels
… welded joints were tested to determine fatigue resistance and the effects of cyclic loading on the localized debonding of the heat affected zone at the post-injection welded joint of a SPS bridge deck. Seven panels containing one of three post-injection weld configurations were …
-
Fatigue tests of slender-web hybrid plate girders under combined moment and shear
Fatigue tests of thirteen slender-web welded hybrid plate girders are described. The girders were tested under loading that produced a maximum flange stress of 50 ksi and a shear stress of about 12. 5 ksi. The girder flanges were constructional alloy steel with a minimum yield point of 100 ksi, and …
-
Optimized carburized steel fatigue performance as assessed with gear and modified Brugger fatigue tests
Includes bibliographical references (pages 82-85).
-
Modelling the transition from channel-veins to PSBs in the early stage of fatigue tests
<p>Dislocation channel-veins and persistent slip bands (PSBs) are characteristic dislocation configurations that are of interest to both industry and academia. However, existing mathematical models are not adequate to describe the mechanism of the transition between these two states. In this …
-
3D characterization of oxidation and crack propagation in Inconel 617 fatigue and creep-fatigue tests
Includes bibliographical references (pages 64-69).
-
Development of an expert system facilitating the selection of a mix for an asphalt pavement and analysis of fatigue tests
… information databases. Four point beam bending fatigue tests have been carried out as a part of the laboratory tests to acquire knowledge about the fatigue response of the different mixes for the decision support system. The secondary goals of carrying out the tests were to evaluate the test …
-
Advanced modelling of the fatigue of butt-welded structures : a thesis / by Ninh T. Nguyen.
… the combined axial and bending loadings on the fatigue behaviour of butt-welded steel joints. Presents ways of improving the fatigue strength. Simulates the effect of the induced surface compressive residual stresses on the welded joints (for the improvement of the fatigue life). Explains the …
-
The corrosion fatigue behavior of notched 2024-T351 aluminum
Notched tensile tests and notched fatigue tests were performed at room temperature to study the corrosion fatigue behavior of aluminum alloy 2024-T351 in 3% salt solution. Notched characteristics of aluminum alloy 2024-T351 were found to be the same as those of other high strength aluminum alloys. …
-
Static and Fatigue Failure Response of Woven Carbon Fiber Specimens with Double Edge Notches
… double-edge notches in a series of static and fatigue tests performed on an Instron 8801 servo-hydraulic testing system. Specimens were constructed of Advanced Composites Group product # LTM45EL woven carbon fiber pre-preg/epoxy and were cut to approximately 9-inch in length and 1-inch in …
-
Experimental Performance of High Mast Illumination Poles with Pre-Existing Cracks
… is part of TxDOT Research Project 0-6829: “Fatigue Resistance and Reliability of High Mast Illumination Poles (HMIPs) with Pre-Existing Cracks.” TxDOT Project 0-6829 is aimed at generating data and information to support a probabilistic based assessment of the remaining life of pre-cracked …
-
Non-linear Bi-axial fatigue Testing of Wind Turbine Blades
… be tested, for both static and dynamic (e.g., fatigue)<br/>loading. Wind turbine blades generally experience, through their lifetime, different loads that affect their<br/>durability, causing damage and consequently crack. In addition, offshore wind turbine blades are more<br/>subject to higher …
-
An investigation of the effects of additive friction stir deposition on railroad rails
… head of existing AREMA 115RE rails. Two types of tests were performed to evaluate the effectiveness of AFSD; flexural bend tests and cyclic fatigue tests. The flexural tests evaluated the maximum load capacity of rails with different types of additive deposition parameters with respect to the …
-
Modeling the Pre-Existing Cracks at the Base of High Mast Illumination Poles
… over the entire design life is the wind induced fatigue load. The pre-existing galvanization induced cracks could have detrimental effects on the long-term durability and serviceability of HMIPs. Previous research efforts focused on conducting fatigue tests on HMIPs in the laboratory, monitoring …
-
Plasticity-Induced Fatigue Crack Closure For Structural Steels In Offshore Applications.
… and numerically the plasticity-induced fatigue crack closure (PIFCC) behavior in S355 offshore structural steels through large-scale in-plane bending fatigue tests of circular hollow section (CHS) X-joints and small-scale fatigue tests of C(T) and M(T) fatigue specimens. The full-scale …
-
The effect of diffused hydrogen on the torsional fatigue life of 2024-T351 aluminum alloy
Fatigue tests in reversed torsion were run on 2024-T351 aluminum alloy specimens into which hydrogen had been diffused. The diffusion was accomplished by placing the specimens in a hydrogen environment (>99.5%) for 25 days at 2000 psi [13.8 MPa] and 123°C. A control group was tested which underwent …
-
Software tools for computer-controlled fatigue testing
… of the personal computer in controlling fatigue tests is evaluated. Cost effectiveness and versatility favor the use of a personal computer for the control of fatigue tests.
-
Consideration of strand fatigue for load rating prestressed concrete bridges
… dissertation is an investigation of the use of fatigue of the strand in prestressed concrete beams for the load rating of prestressed concrete bridges. The criteria for load rating prestressed concrete bridges are provided by the American Association of State Highway and Transportation Officials …
-
Thermoelastic stress analysis techniques for mixed mode fracture and stochastic fatigue of composite materials
… analysis (TSA) techniques for fracture and fatigue damage analysis of composite materials. The first part deals with the thermo-mechanical derivation of two quantitative TSA techniques applied to orthotropic composites with and without a transversely-isotropic surface coating layer. The new …
Page 1 of 22