Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 176 for “"feed rates"”.

  1. Abrasive Blasting Process Optimization: Enhancing Productivity, and Reducing Consumption and Solid/Hazardous Wastes

    … at establishing relationships between applied feed rates and resulting productivity and consumption rates. It is clear that the high costs of disposal of the multimedia wastes generated by the dry abrasive blasting processes are of increasing concern in the future of shipbuilding industry. In …

    uno Repository record for Abrasive Blasting Process Optimization: Enhancing Productivity, and Reducing Consumption and Solid/Hazardous Wastes (opens in a new tab)

  2. Characterization of Ultra-High-Speed Friction Stir Welds Made in Thin Sheet AA6061-T4 Material

    … traditionally reduced process parameters such as feed rate and spindle rotation to fully eliminate the defects. While such measures are successful in creating fully consolidated FSLW, feed rates for FSLW have stagnated around 1 mpm with the fastest feed rates recorded at 3 mpm, making it difficult …

    byu Repository record for Characterization of Ultra-High-Speed Friction Stir Welds Made in Thin Sheet AA6061-T4 Material (opens in a new tab) Download PDF for Characterization of Ultra-High-Speed Friction Stir Welds Made in Thin Sheet AA6061-T4 Material (opens in a new tab)

  3. ORTHOPEDIC DRILLING & THERMAL INJURY ANALYSIS

    … reduced by varying the rotational velocity and feed rate in orthopedic drilling, and thus reduce the probability of thermal osteonecrosis. Experiments were performed comparing combinations of feed rates and spindle speeds for the drilling process parameters, specifically feed rates of 1.5, 3.0, …

    temple Repository record for ORTHOPEDIC DRILLING & THERMAL INJURY ANALYSIS (opens in a new tab)

  4. Twin Screw Wet Granulation With Various Hydroxypropyl Methylcellulose (HPMC) Grades

    … formulations. This part examined the impact of feed rate on the granulation range of Type 2910 HPMC specifically was examined. Multiple feed rates were tested, and it was found that the granulation range for lower molecular weight Type 2910 HPMC was easier to shrink when higher feed rates were …

    mcmaster Repository record for Twin Screw Wet Granulation With Various Hydroxypropyl Methylcellulose (HPMC) Grades (opens in a new tab)

  5. Machining process model for intelligent rough machining of sculptured parts

    … to generate the model, which is used to plan the feed rates required to maintain a constant load on the milling machine. A clustering of the feed rates intervals is applied for reducing the total machining time, which results in time savings of up to 16 percent. The features incorporated in the …

    uvic Repository record for Machining process model for intelligent rough machining of sculptured parts (opens in a new tab)

  6. Effect of operating variables on composition of overhead vapors and residue from a continuous flash distillation for the system methanol-water at atmospheric and sub-atmospheric pressures

    … of temperature, agitation, and rate of feed at a total pressure of 500 millimeters of mercury, absolute. The distillation took place in a nine inch diameter, electrically-heated, controlled temperature and pressure, cylindrical still 14 inches high. The liquid phase was agitated by the …

    vt Repository record for Effect of operating variables on composition of overhead vapors and residue from a continuous flash distillation for the system methanol-water at atmospheric and sub-atmospheric pressures (opens in a new tab)

  7. Sediment transport and morphological response of a semi-alluvial channel : insights from a Froude scaled laboratory model

    … (1) effects of various flows and sediment feed rates on surface textures and sediment output, (2) relationship between channel storage, and the (3) morphology and sediment transport sediment transport processes and pathways. These objectives were addressed by building a Froude scaled …

    ubc Repository record for Sediment transport and morphological response of a semi-alluvial channel : insights from a Froude scaled laboratory model (opens in a new tab) Download PDF for Sediment transport and morphological response of a semi-alluvial channel : insights from a Froude scaled laboratory model (opens in a new tab)

  8. Pressure drop in packed beds of metal Raschig rings

    … packed tower designed by the author at water feed rates of 0 - 10,000 lb/hr ft<sup>2</sup> and at air feed rates of 100 - 1500 lb/hr - ft<sup>2</sup>. Similar data were obtained for one inch ceramic Raschig rings.</p><p>It was found that lower pressure drops at equal flow rates were obtained …

    njit Repository record for Pressure drop in packed beds of metal Raschig rings (opens in a new tab)

  9. Comparison of Heat Generation Models in Finite Element Analysis of Friction Welding

    … Maximum force was predicted within 12% at high feed rates, but accuracy dropped to 28% when feed rate was reduced. The motor power model was the most accurate model at estimating temperature, with a typical accuracy within 25 degrees C. Axial upset was predicted within 5%. Maximum force was …

    byu Repository record for Comparison of Heat Generation Models in Finite Element Analysis of Friction Welding (opens in a new tab) Download PDF for Comparison of Heat Generation Models in Finite Element Analysis of Friction Welding (opens in a new tab)

  10. Fermentation studies on recombinant yeast

    … was partially repressed by higher glycerol feed-rates and by ethanol accumulation in the medium. With the Mut$\sp-$ strain, a constant glycerol feed-rate of 1 g L$\sp{-1}$ h$\sp{-1}$ resulted in the highest specific yield of the recombinant protein, $\beta$-galactosidase. Higher glycerol …

    nebraska Repository record for Fermentation studies on recombinant yeast (opens in a new tab)

  11. Impact of hard-turning parameters on the surface integrity of hybrid 60 steel

    … A, B, C, and D with varying cutting speeds and feed rates, and samples E1, E2, and E3 under identical conditions. To analyze the surface integrity, techniques such as X-ray diffraction (XRD), optical microscopy (OM), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy …

    chalmers Repository record for Impact of hard-turning parameters on the surface integrity of hybrid 60 steel (opens in a new tab)

  12. Impact of Processing Parameters and Forces on Channels Created by Friction Stir Bobbin Tools

    … test the effects of different spindle speeds and feed rates. Using a gantry-type computer numerical control (CNC) friction stir welding (FSW) machine, the aluminum coupons were subjected to calibration experiments, force control tests, and an increased production rate to test these effects. It was …

    unt Repository record for Impact of Processing Parameters and Forces on Channels Created by Friction Stir Bobbin Tools (opens in a new tab)

  13. A Torque Based Power Input Model for Friction Stir Welding

    … decreasing the spindle speed or increasing the feed rate significantly decreases the heat input at low feed rates. At high feed rates, feed rate and spindle speed have little effect on the heat input. Process parameter versus heat input trends are verified by measurements of the weld heat …

    byu Repository record for A Torque Based Power Input Model for Friction Stir Welding (opens in a new tab) Download PDF for A Torque Based Power Input Model for Friction Stir Welding (opens in a new tab)

  14. Optimization of machining parameters in multi-pass turning and milling operations

    … involves the optimal selection of cutting speed, feed rate, depth of cut and the number of passes. In this thesis, the parameter optimization problem for multi-pass machining operations is studied. Mathematical programming models for both multi-pass turning and face-milling operations with …

    concordia Download PDF for Optimization of machining parameters in multi-pass turning and milling operations (opens in a new tab)

  15. Effect to tool wear on quality of carbon fiber reinforced polymer laminate during edge trimming

    … speeds ranging from 200 m/min to 400 m/min and feed rates ranging from 0.3048 mm/rev to 0.4064 mm/rev were used in the experiments. The results obtained using a scanning electron microscope (SEM) showed increasing defect rates with an increase in tool wear. The worst surface integrity, including …

    ets-quebec Download PDF for Effect to tool wear on quality of carbon fiber reinforced polymer laminate during edge trimming (opens in a new tab)

  16. Digital Tracking Control for Machine Tool Feed Drives

    The use of linear motor direct drives as feed drives enables higher feed rates and accelerations, eliminates problems with backlash, and reduces power waste due to friction. Servo controller design of those feed drives becomes more challenging due to dynamic interaction between the servo control …

    uiuc Repository record for Digital Tracking Control for Machine Tool Feed Drives (opens in a new tab)

  17. Mist Characterization in Drilling 1018 Steel

    … was performed to determine whether speed and feed rates or their interactions have a significant effect on mist concentration levels and particle diameter. It was observed that the concentration levels obtained under all four speed and feed rate combinations studied exceeded the current OSHA …

    unt Repository record for Mist Characterization in Drilling 1018 Steel (opens in a new tab)

  18. The use of specialty sorghums for expanded snack food processing

    … quality. Cracking the sorghums produced lower feed rates, higher specific mechanical energy (SME) and extrudates that were less dense, more expanded, and softer than whole kernel extrudates. Whole and cracked sorghum materials had feed rates similar to corn meal, but lower SME. Corn meal …

    tamu Repository record for The use of specialty sorghums for expanded snack food processing (opens in a new tab)

  19. Improved Residual Stress Prediction in Metal Cutting

    … with predicting residual stresses when small feed rates are used. It is shown that in the existing cutting models residual stress prediction accuracy suffers when feed rates are small. A sequential cut module is developed, which greatly increases the accuracy of the predicted residual stress …

    mcmaster Repository record for Improved Residual Stress Prediction in Metal Cutting (opens in a new tab)

Page 1 of 9