Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 28 for “"fiber drawing"”.
-
Modeling of material response during fiber drawing of semicrystalline pet
Accurate constitutive modeling of polymeric fibers presents a difficult and distinct challenge. While significant progress has been made in constructing models applicable for small strains and limited strain-rate and temperature regimes, much less has been made for more general conditions. This is …
-
Process Model and Control System for the Glass Fiber Drawing Process
Drawing of glass fibers is an important industrial process used for manufacture of a variety of materials ranging from optical communications cables to fiber filter media. A variety of machines exist for performing the drawing function, but all share similar problems with control of the fiber …
-
Thermo-fluid modeling and robust control of modern optic fiber drawing processes
… for the design and control of a modern optic fiber drawing process. Although modeling of the fiber drawing process has been of interest for the past three decades, most of the previous studies were limited to low draw speeds and small preforms. Large preforms drawn at high speeds have been …
-
Synthesis and Characterization of Si, Ge, and SixGe1-x Nanowires by Fiber Drawing
… first time SiGe alloys are produced in optical fiber from a mixture of the two powders across the entire compositional range. A discussion of the properties of silicon and germanium and their alloys is given with emphasis on the differences between properties at the bulk scale and at the …
-
1D Model Estimation of Free Surface Location in a Polymer Fiber Drawing Process
… estimate free surface location in a polymer fiber drawing process. The simplified model will include the effects of temperature-dependent viscosity of the polymer μ(z), variable furnace wall temperature profile Tw(z), and radiation heat transfer. Empirical relations were used to model the …
-
Improved draw process in optical fiber fabrication
The performance of an optical fiber depends to a great extent on the conditions of the process being used to draw the fiber from a glass preform. To get fibers with higher strength and lower transmission loss, the parameters of the draw process must be optimized and the geometric uniformity of the …
-
Understanding the Effect of Vibration on the Crystallization of ZBLAN
… per day, enabled largely through optical fiber communication. While silica-based fibers dominate due to their low attenuation (~0.15 dB/km in the visible range), they exhibit severe signal loss exceeding 800,000 dB/km in the infrared (IR) region, limiting their suitability for mid-IR …
-
Gel spun PAN and PAN/CNT based carbon fibers: From viscoelastic solution to elastic fiber
… nanotube (PAN/CNT) carbon fibers. Gel spun PAN based carbon fibers are manufactured beginning with a study of PAN dissolution in an organic solvent (dimethylformamide, DMF). Homogeneity of the PAN/DMF solution is determined through dynamic shear rheology, and the slope of …
-
Processing of composite fibers based on polypropylene and a thermotropic liquid crystalline polymer
… liquid crystalline polymer (TLCP), in two novel fiber spinning processes. In one process, a single VB melt stream was surrounded by a sheath of PP in a manner comparable to a wire coating process just prior to melt spinning to generate fibers possessing a sheath-core structure. The other process …
-
Synthesis and Characterization of Interfaces Between Naturally Derived and Synthetic Nanostructures for Biomedical Applications
… techniques: fibrillogenesis through slow wet fiber drawing (gelation process) and electrospinning has been highlighted. Characterization of the novel nanocomposite was conducted using electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, …
-
Multimaterial Fibers for Biosensing Application Using Electrochemistry
… component. Multimaterial electrode-embedded fibers are used as the sensing electrode and the electrode material presented is platinum (Pt). Platinum is employed because of its biocompatibility property. The electrodes are placed in the fiber by the method of convergence fiber drawing and the …
-
Fabrication and a Study on the Wetting Properties of Nanostructured Surfaces
… fabricating an ordered array of glass nanocones. Fiber drawing and differential glass etching processes were used to produce cone like structures with lattice constant of 40 μm down to 1.6 μm. The superhydrophobic behavior was first studied and modeled in a series of nanocone wafers of increasing …
-
Processing, spinning, and fabrication of continuous fibers of single-walled carbon nanotubes
… and processing into macroscopic articles such as fibers or films. Fibers spun from SWNT/superacid dispersions indicate that the morphology of the starting SWNT material influences the final morphology of the as-spun fiber. Here, we describe a method (termed disentanglement) of dispersing SWNTs in …
-
Electrically active microfluidic fibers
… and materials made available by multimaterial fiber processes, which have recently emerged as a materials platform for a variety of sensing modalities. Various functionalities, such as flow actuators or sensors, are integrated into multimaterial fibers for functional chip feedlines. Integrated …
-
Use of ionic liquid for producing regenerated cellulose fibers
… establish the process of obtaining regenerated fibers and films from wood pulp and bagasse pulp with the ionic liquid 1-Butyl-3-methylimidazolium Chloride (BMIMCl) as a solvent; to study the impacts on tensile strength of different spinning parameters; to find the optimal spinning condition, and …
-
Development of Mid-infrared Fluoroindate Glasses
… fluoroindate glasses offer higher fibre drawing ability and resistance against devitrification. A fluoroindate glass with the specific composition of 32InF₃-20ZnF₂-20SrF₂-18BaF₂-8GaF₃-2CaF₂ (IZSBGC) has been developed in this project. This material demonstrates high transmission in the IR …
-
Multimaterial fibers in photonics and nanotechnology
… properties monolithically in a kilometer-long fiber drawn from a preform offers unique multifunctionality at a low cost. A wide range of unique in-fiber devices have been developed in fiber form-factor using this strategy. Here, I summary my recent results in this nascent field of …
-
Two-point bend studies of glass fibers
… the presence of flaws on the sample surface. The fiber drawing system and two-point bending (TPB) equipment developed at Missouri S&T allow the fabrication of pristine glass fibers and failure strain measurements while minimizing the effects of strength limiting critical flaws. Several conditions …
Page 1 of 2