Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 277 for “"fiber laser"”.

  1. Fiber Laser Based Nonlinear Spectroscopy

    … laboratory settings. Over recent years, optical-fiber lasers that are highly reliable, simple to operate and relatively inexpensive have become commercially available, removing one of the major obstacles to widespread utilization of nonlinear optical measurement in biochemistry. However, fiber …

    ku Repository record for Fiber Laser Based Nonlinear Spectroscopy (opens in a new tab)

  2. Development of Ultrafast Fiber Laser Sources

    … of high average and peak power ultrashort pulsed fiber lasers is important for many critical research, industrial, and defense applications. However, the performance of mode-locked fiber oscillators still lags behind that of solid-state counterparts such as Kerr-lens mode-locked Ti:sapphire …

    arizona-thes Repository record for Development of Ultrafast Fiber Laser Sources (opens in a new tab)

  3. Novel Devices for Fiber Laser Application

    In this thesis, several novel devices for fiber laser are proposed and demonstrated. The first type of device is based on modal interference in non-adiabatic fiber tapers. Using such tapers, we demonstrate a simple technique to tune the wavelength of an all-fiber erbium-doped laser. Next, we …

    arizona-thes Repository record for Novel Devices for Fiber Laser Application (opens in a new tab)

  4. Optical Seed Development For Yb-Fiber Laser

    Master Oscillator Power Amplifiers (MOPA) are laser systems that utilize a seed and pump amplification system to boost the output power of high-quality lower power seeding signals. MOPAs can generate high gain while avoiding many of the nonlinearities that negatively affect resonance-based lasers …

    ucf Repository record for Optical Seed Development For Yb-Fiber Laser (opens in a new tab)

  5. Fiber laser weldability of austenitic nickel alloys

    Recent developments of fiber lasers allow for easier beam delivery facilitating greater applications for laser welding in industry. Welding with high energy density heat sources allows for faster travel speeds, faster cooling rates, and smaller heat affected zones. However, there is a still a lack …

    colo-mines Repository record for Fiber laser weldability of austenitic nickel alloys (opens in a new tab)

  6. Thulium Doped Fiber Laser and Its Applications

    Laser as one of the core components of the photonics industry plays a crucial role in keeping the compound annual growth rate (CAGR) of this industry much higher than the average of global GDP growth. The exceptional performance of fiber laser and its advantages, including robustness, excellent …

    arizona-thes Repository record for Thulium Doped Fiber Laser and Its Applications (opens in a new tab)

  7. Thulium Doped Microsphere Laser and Fiber Laser

    … by spin casting technique. Single mode 2-mm laser is demonstrated from tellurite microsphere with high thulium doping concentration. General laser condition for self-terminating transition is discussed and concluded. Demonstration of 1.5-mm laser is achieved from a self-terminating transition …

    arizona-thes Repository record for Thulium Doped Microsphere Laser and Fiber Laser (opens in a new tab)

  8. Fiber Laser Welding of Advanced High Strength Steels

    Fiber laser welding (FLW) was used to join advanced high strength steel (AHSS) and high strength steel (HSS); specifically two dual-phase (DP) steels, with ultimate tensile strengths above 980 MPa and with different chemistries (DP980 Rich and DP980 Lean), and a high strength low alloy (HSLA) …

    waterloo Repository record for Fiber Laser Welding of Advanced High Strength Steels (opens in a new tab)

  9. Pulsed Tm-fiber Laser For Mid-ir Generation

    The thulium fiber laser has gained interest due to its long emission wavelength, large bandwidth (~1.8 – 2.1 µm), high efficiencies (~60 %), and high output power levels both in cw as well as pulsed regimes. Applications like remote sensing, machining, medical tissue ablation, and mid-infrared …

    ucf Repository record for Pulsed Tm-fiber Laser For Mid-ir Generation (opens in a new tab)

  10. Single-fiber-laser-based multimodal coherent Raman system

    … However, the system usually has to use two laser sources with exactly the same repetition rate but different frequencies, which makes the setup expensive and the tuning procedure complicated. As presented in this thesis, my PhD research attempts to simplify the CRS system, and extend its …

    ku Repository record for Single-fiber-laser-based multimodal coherent Raman system (opens in a new tab)

  11. Constructing a High Power Single-Mode Fiber Laser

    A high power double-clad Er-Yb doped fiber laser is constructed and characterized. The fiber is cladding pumped by a 10 W 975 run laser diode, and later by a 10 W 915 nm laser diode. The fiber laser generates up to 1.38 W of continuous wave output power at 1550 run, tunable up to 1560 run, with a …

    oregon Repository record for Constructing a High Power Single-Mode Fiber Laser (opens in a new tab)

  12. Controlled fiber laser bone ablation using inline coherent imaging

    Laser material processing is becoming increasingly popular in various disciplines of science and industry due to its clean and quiet operation, absence of tool wear and high positioning accuracy. In particular, laser osteotomy ("bone cutting") offers new opportunities with its well-identified …

    queens Repository record for Controlled fiber laser bone ablation using inline coherent imaging (opens in a new tab)

  13. Fiber laser welding of nickel-based superalloy Inconel 718

    … aircraft and power turbine components. Recently, fiber laser welding has become an attractive joining technique in industry for fabrication and repair of service-damaged components. However, a major limitation in the laser welding of IN 718 is that liquation cracking occurs. In the present work, …

    manitoba Repository record for Fiber laser welding of nickel-based superalloy Inconel 718 (opens in a new tab)

  14. Thulium-doped ultrafast fiber laser system designs and dynamics

    Thulium (Tm)-doped ultrafast fiber lasers with emission wavelengths around 2 μm are desirable sources for scientific, industrial, medical, and environmental applications and flexible testbeds for investigating nonlinear pulse dynamics. Although exceptional research attention has been drawn by …

    bu Repository record for Thulium-doped ultrafast fiber laser system designs and dynamics (opens in a new tab)

  15. Passive thermal management in high-power fiber laser systems

    Submission original under an indefinite embargo labeled 'Open Access'. The submission was exported from vireo on 2022-11-11 without embargo terms

    uiuc Repository record for Passive thermal management in high-power fiber laser systems (opens in a new tab)

  16. Miniature multiphoton endoscopy using frequency-doubled Er-doped fiber laser

    … tissues and organs. MPM uses femtosecond laser pulses to excite nonlinear signals from tissues and is capable of inherent optical sectioning. MPM systems have been mostly implemented using free-space optics and microscope platforms. For clinical applications, a compact fiber-optic MPM …

    ubc Repository record for Miniature multiphoton endoscopy using frequency-doubled Er-doped fiber laser (opens in a new tab) Download PDF for Miniature multiphoton endoscopy using frequency-doubled Er-doped fiber laser (opens in a new tab)

  17. Field-resolved infrared spectroscopy based on thulium fiber laser technology

    … of biological samples. Advances in thulium fiber laser technology have facilitated access to femtosecond pulses at a central wavelength around 2 μm. This is roughly twice as long as that of the frontends’ driving the first-generation FRS instrumentation. The corresponding lower photon energy …

    lmu-germany Repository record for Field-resolved infrared spectroscopy based on thulium fiber laser technology (opens in a new tab)

  18. Specialty Optical Fibers and Their Applications in Fiber Laser Systems

    … Snitzer transferred this new and groundbreaking laser concept to Neodymium doped glass waveguides and paved the way for modern fiber lasers. The prediction of low loss optical fibers for long-distance optical communication by C. Kao in 1966 and the first demonstration of a fiber with only 20 …

    ucf Repository record for Specialty Optical Fibers and Their Applications in Fiber Laser Systems (opens in a new tab)

Page 1 of 14