Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 29 for “"filled epoxy"”.

  1. Molecular dynamics in core-shell filled epoxy nanocomposites

    … types were synthesised and utilised as epoxy fillers with the main objective of understanding the molecular dynamics of these nanocomposites. Secondly to understand the effect of different characteristics of these nanoparticles such as the structure, crystallinity, core and shell …

    soton Download PDF for Molecular dynamics in core-shell filled epoxy nanocomposites (opens in a new tab)

  2. Fracture analysis of glass microsphere filled epoxy resin syntactic foam

    … for fracture resistance in glass microsphere filled epoxy (GMFE) syntactic foams, as well as determined the effect microsphere crushing strength and adhesion strength has on the material s fracture toughness. The flexural properties of various GMFE have also been determined. GMFE were …

    unsw Repository record for Fracture analysis of glass microsphere filled epoxy resin syntactic foam (opens in a new tab)

  3. Nano-filled Epoxy: Mechanical and Fire Behavior and Modeling of Nanocomposite Columns Under Fire

    … columns under fire are presented for nano-filled Diglycidyl Ether of Bisphenol A epoxy. The nanofillers used are montmorillonite nanoclays and carbon nanofibers. Three types of nanocomposites are manufactured: epoxy-clay, epoxy-carbon nanofiber, and epoxy-clay-carbon nanofiber …

    uno Repository record for Nano-filled Epoxy: Mechanical and Fire Behavior and Modeling of Nanocomposite Columns Under Fire (opens in a new tab)

  4. Thermally Stimulated Depolarization Current Evaluation of Molding Compounds

    … investigate polarization and relaxation for pure epoxy and filled epoxy materials, a TSDC system was built and verified by the research. The article describes the building processes and verification of the TSDC system. TSDC, TSPC, and TWC tests data for epoxy and filled epoxy samples are presented …

    unt Repository record for Thermally Stimulated Depolarization Current Evaluation of Molding Compounds (opens in a new tab)

  5. Durability of Adhesive Joints Subjected to Environemntal Stress

    … In this research, the durability of certain epoxy adhesive joints and coatings were characterized using a fracture mechanics approach and also by constant frequency impedance spectroscopy. The shaft-loaded blister test (SLBT) was utilized to measure the strain energy release rate (G) or …

    vt Repository record for Durability of Adhesive Joints Subjected to Environemntal Stress (opens in a new tab)

  6. Acoustic emission and mechanical properties of particle reinforced composites

    … (AE) tests were performed on alumina particle-filled epoxy and alumina particle-filled martensitic steel composites. The ring-down counting method was used to measure AE. Three-point bending tests were carried out for the martensitic steel composites and AE was recorded during the fracture …

    ubc Repository record for Acoustic emission and mechanical properties of particle reinforced composites (opens in a new tab) Download PDF for Acoustic emission and mechanical properties of particle reinforced composites (opens in a new tab)

  7. Mechanism-based modeling of ductile void growth failure in multilayer structures

    … composites constituents, e.g. glass fiber and Ag-filled epoxy. Research areas thus investigates on the role of vapour pressure on fracture toughness of SSY crack growth and constrained ductile layer centerline crack growth models, together with decohesion failure at fiber-matrix and …

    nus Repository record for Mechanism-based modeling of ductile void growth failure in multilayer structures (opens in a new tab) Download file for Mechanism-based modeling of ductile void growth failure in multilayer structures (opens in a new tab)

  8. A method for determining material damping from driving point measurements

    … on 2024-T351 aluminum and an aluminum particle filled epoxy. The tests were conducted in atmospheric air and in a reduced pressure environment to observe the effect of air damping. The material damping loss factor was extracted from the test results and compared with results obtained from a …

    iastate Repository record for A method for determining material damping from driving point measurements (opens in a new tab)

  9. Enhancement of properties of carbon-fiber-reinforced TGDDM/DDS epoxy composites containing nanoclay

    … on the nanocomposites fabricated from TGDDM/DDS epoxy system, carbon fiber reinforcement, and montmorillonite nanoclay modifier. The viscosity and gel time of nanoclay-filled composites with different nanoclay contents were measured. The influence of nanoclay on curing process was investigated by …

    concordia Download PDF for Enhancement of properties of carbon-fiber-reinforced TGDDM/DDS epoxy composites containing nanoclay (opens in a new tab)

  10. Evaluation of Engineering Plastic for Rollover Protective Structure Mounting

    … examinations. Materials examined were a steel-filled epoxy, a fast curing steel-filled polyurethane, and an iron oxide-filled epoxy. The iron oxide-filled epoxy was chosen based upon strength and cost. This material showed the highest shear strength, 28.6 MPa, and compressive stress resistance. …

    ut-knoxville Repository record for Evaluation of Engineering Plastic for Rollover Protective Structure Mounting (opens in a new tab)

  11. Fatigue behavior of alpha-zirconium phosphate/epoxy nanocomposites

    Fatigue crack growth in ±-Zirconium phosphate/epoxy nanocomposites was investigated. A new fatigue testing technique was implemented for miniature samples. Two different methods “strength of materials and Rayleigh-Ritz - were used in determining the bending stress. The fatigue stress and fatigue …

    tamu Repository record for Fatigue behavior of alpha-zirconium phosphate/epoxy nanocomposites (opens in a new tab)

  12. Comparison of Milling Cutting Forces in Synthetic and Biological Cancellous Bone

    … use bone surrogate material made of glass fiber filled epoxy and polyurethane foam. Although these materials may mimic the elongation of cortical and cancellous bone, respectively, the match of machinability of the bone is in question. In particular, no study has compared surrogate and biological …

    gvsu Repository record for Comparison of Milling Cutting Forces in Synthetic and Biological Cancellous Bone (opens in a new tab)

  13. Synthesis and characterization of boron-containing polymeric materials for neutron shielding applications

    … physical and thermal properties: boron powder-filled epoxy composites, carborane polyamides having boron chemically bonded into the polymer, and boron-loaded polyimide thin films. Addition of amorphous submicron boron powder did not affect significantly the thermal performance of the epoxy. The …

    wm-mary Repository record for Synthesis and characterization of boron-containing polymeric materials for neutron shielding applications (opens in a new tab)

  14. Measurement of applied force to dislodge orthodontic temporary anchorage devices

    … laminated with either 2mm or 3mm short-fibre-filled epoxy sheets and a horizontal dislodging force applied, using an Instron universal testing machine. The maximum force applied before the TAD was fully dislodged was recorded. Three TADs were tested: InfinitasTM, Ancor ProTM and Ortho …

    birmingham Download PDF for Measurement of applied force to dislodge orthodontic temporary anchorage devices (opens in a new tab)

  15. In-situ early detection of metal corrosion via "turn-on" fluorescence in "smart" epoxy coatings

    Organic coatings (e.g., epoxy coatings) have been widely used to protect metal and metal alloys against corrosion. However protective coating fails with time, leading to corrosion of the metal substrate. When localized corrosion occurs, without being detected, it can result in disastrous failure of …

    unh-thes Repository record for In-situ early detection of metal corrosion via "turn-on" fluorescence in "smart" epoxy coatings (opens in a new tab)

  16. A miniaturised focussed ultrasound transducer for soft tissue ablation

    … a single piezoceramic disc with a microballoon filled epoxy backing layer to approximate an air backing, and an acoustic Fresnel lens. The transducer was first developed as a virtual prototype in finite element analysis (FEA) that characterised the device’s acoustic field output with respect to …

    glasgow Repository record for A miniaturised focussed ultrasound transducer for soft tissue ablation (opens in a new tab) Download PDF for A miniaturised focussed ultrasound transducer for soft tissue ablation (opens in a new tab)

  17. INVESTIGATION OF A SOFT TACTILE SENSING SYSTEM FOR HUMAN COLLABORATIVE ROBOTS

    … the multi-wall carbon nanotube (MWCNT) filled epoxy aliphatic acrylate (EAA)/Aliphatic urethane diacrylate (AUD) composite tactile sensor is studied. The coating method for the MWCNT coated polydimethylsiloxane (PDMS) tactile senor is also studied. Axiomatic Design Theory and Adaptable …

    sask Repository record for INVESTIGATION OF A SOFT TACTILE SENSING SYSTEM FOR HUMAN COLLABORATIVE ROBOTS (opens in a new tab)

Page 1 of 2