Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 13 of 13 for “"filter cake formation"”.
-
Solution Tool to Predict Filter Cake Formation for Acid Mine Drainage (AMD) Slurries
… study is to develop a solution tool to predict filter cake formation, and to perform extensive filtration testing of AMD slurries, identifying of a competent geotextile material for filtration purposes for the proposed AMD slurries, and identifying supplemental behavioral data in order to …
-
Investigation of the Transport and Plugging Behavior of Preformed Particle Gels (PPGs) in Fractures for Conformance Control in Carbonate Reservoirs
… and within the fracture, which could lead to a filter-cake formation and/or retards gel propagation. The objectives of this study include investigating filter-cake formation conditions, providing a coherent assessment of (PPGs) dehydration and retention characteristics in fracture models, and …
-
Modelagem e previsão da perda de injetividade em poços canhoneados
… water may cause plugging of pore throats causing formation damage (permeability reduction) and injectivity decline during waterflooding. When injectivity decline occurs it is necessary to increase the injection pressure in order to maintain water flow injection. Therefore, a reliable prediction of …
-
Investigation of Single Phase NanoCellulose Transport Through Porous Media
… which resulted in increased straining and filter cake formation.
-
Characterizing and Modeling of Ultra-Soft Clay Soil, Filter Cake and Drilling Mud
… offshore, coastal soils, and onshore soils with filter cakes and drilling muds, was characterized using new non-destructive in-situ test methods and modeling of the behavior. The new test methods to characterize the ultra-soft soils included the two-probe electrical method and CIGMAT miniature …
-
Time Dependent Effect of Drilling Slurries on Side Shear Resistance of Drilled Shafts
… interface with increased exposure time due to filter cake formation. For this reason, slurry exposure time has been limited to 36 hours by FDOT. Alternately, polymer slurries do not form a filter cake but rather stabilize excavations through continuous soil infiltration and the associated …
-
Multi-phase fluid-loss properties and return permeability of energized fracturing fluids
… the complex mechanisms of viscous invasion and filter-cake formation occurring at the pore-scale. This study presents data supporting the superior fluid-loss behavior of foams, which exhibit minor liquid invasion and limited damage. It also shows direct measurements of the ability of the gas …
-
Evaluation and Removal of Formation Damage Caused by Oil-Based Drilling Fluids Weighted with Micronized Ilmenite
… weighting materials, can cause significant formation damage due to plugging of pores. This study investigates formation damage caused by using an oil-based drilling fluid system weighted with micronized ilmenite. It also evaluates the solubility efficiency of different acid systems to …
-
Interactions between base paper and coating color in metered size press coating
… with a pilot-scale MSP coater. The coating layer formation on woodfree base paper in MSP precoating depended mainly on the base paper surface openness. Lowering the base paper openness by raising the filler content, adding mechanical pulp or through more intensive refining of the chemical pulps …
-
Development of Process Models for Multiphase Processes in the Pore Space of a Filter Cake based on 3D Information
Reliable information about the micro-processes during filtration and dewatering of filter cakes allows more accurate statements about process development and design in any industrial application with solid-liquid separation units. Distributed particle properties such as shape, size, and material …
-
Methodology for enhanced filtration and dewatering of fine-grain AMD precipitate using geocomposites for rare earth elements recovery
… production, and 3) performing tests to filter and dewater the sludge. The first phase was performed by testing six polymer-aided flocculants and one coagulant to identify the more suitable floc production. The six polymers vary in their charge and density but are equal in structure …
-
Peroxidase Catalyzed Degradation of Partially Hydrolyzed Polyacrylamide
… as stable electron carrier during free radical formation. In addition, pilot studies, observing HPAM viscosity reduction, using soybean peroxidase was investigated as an economical alternative to HRP. Partially hydrolyzed polyacrylamide (HPAM; MW = 6,000 kDa) Alcoflood 935 was used as a …
-
An Investigation of Fabric Filtration for the Removal of Colloidal Turbidity from A Laboratory Water
… cationic polymers. The resulting suspension was filtered through various configurations of felt cloth filters. The kaolin suspension was adjusted to 100 JTU. Treatment by polymer consistently lowered the filtered effluent to less than 1 JTU. Jar tests were utilized to determine optimum coagulant …