Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 10 of 10 for “"fin tubes"”.

  1. Filmwise condensation on low integral-fin tubes of different diameter

    … steam and ethylene glycol on three sets of finned tubes which differed only in root diameter. The fin root diameters were 12.7 mm. 19.05 mm and 25.0 mm. A comparison of the enhancement ratios (based on constant vapor-side temperature drop) revealed that, within the range of diameter tested, …

    nps Repository record for Filmwise condensation on low integral-fin tubes of different diameter (opens in a new tab)

  2. The influence of wall conductivity on film condensation with integral fin tubes

    … performance of steam condensing on horizontal finned tubes made of copper, aluminum, copper nickel(90/10), and stainless steel(316) was studied using a condenser test rig at both vacuum and atmospheric conditions. Integral fin tubes included conventional rectangular shaped fins as well as …

    nps Repository record for The influence of wall conductivity on film condensation with integral fin tubes (opens in a new tab)

  3. Effect of fin height on film condensation of steam on stainless steel integral-fin tubes

    … a series of horizontal stainless-steel integral-fin tubes was experimentally studied at both atmospheric and vacuum pressure conditions to examine the effects of fin height on tubes of low thermal conductivity. Eight tubes with rectangular fin heights ranging from 0.16 to 1.42 mm and a smooth …

    nps Repository record for Effect of fin height on film condensation of steam on stainless steel integral-fin tubes (opens in a new tab)

  4. The influence of fin height and wall conductivity on integral-fin tubes during steam condensation

    … transfer performance of horizontal, integral-fm tubes made of copper, aluminum, copper-nickel, and stainless steel was evaluated using a boiler and steam condenser assembly. Testing was done at vacuum and atmospheric pressure conditions. The tubes tested had an inner diameter of 12.7mm, a root …

    nps Repository record for The influence of fin height and wall conductivity on integral-fin tubes during steam condensation (opens in a new tab)

  5. Augmentation of in-tube evaporation and condensation with micro-fin tubes using refrigerants R-113 and R-22

    … and evaporation is the use of internally finned tubes, specifically, tubes with small spiral fins, referred to as "micro-fin" tubes. The characteristic that distinguishes micro-fin tubes from other forms of internally finned tubes is that the fins are much smaller and more numerous. The …

    iastate Repository record for Augmentation of in-tube evaporation and condensation with micro-fin tubes using refrigerants R-113 and R-22 (opens in a new tab)

  6. In-tube evaporation and condensation of HFC-134a and CFC-12 with various lubricant mixtures

    … of HFC-134a and CFC-12 in smooth and micro-fin tubes. Two different diameter smooth tubes and micro-fin tubes were tested: 9.52-mm outside diameter tubes and 12.7-mm outside diameter tubes. Micro-fin tubes are characterized by the numerous small fins that spiral down the inner surface of the …

    iastate Repository record for In-tube evaporation and condensation of HFC-134a and CFC-12 with various lubricant mixtures (opens in a new tab)

  7. Heat transfer evaluation of HFC-236ea and HFC-236fa in evaporation and condensation

    … has been performed on two types of low integral-fin tubes (1024-fpm and 1575-fpm tubes) and three types of high performance enhanced tubes (Turbo-CII, Turbo-B, and Turbo-BII tubes). HFC-236fa was tested with these five tubes during pool boiling and condensation, while HFC-236ea was tested mainly …

    iastate Repository record for Heat transfer evaluation of HFC-236ea and HFC-236fa in evaporation and condensation (opens in a new tab)