Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 31 for “"finite volume model"”.
-
Two Dimensional Finite Volume Model for Simulating Unsteady Turbulent Flow and Sediment Transport
… the shallow water equations by the Godunov-type finite volume method is a newly emerging area. The Godunov-type finite volume method is good at capturing the discontinuous fronts in numerical solutions. This makes the method suitable for solving the system of shallow water equations. In this …
-
DEVELOPMENT OF A 2-DIMENSIONAL FINITE VOLUME MODEL TO ASSESS HYDRODYNAMIC AND MICROBIAL CONTROLS ON DNAPL DISSOLUTION AND DETOXIFICATION
… A two-dimensional coupled flowtransport model was developed, with a DNAPL pool source and multiple microbial species. In the scenario presented, Dehalococcoides mccartyi 195 competes with Desulfuromonas michiganensis for the electron acceptors PCE and TCE. Simulations under biostimulation …
-
Thermal Analysis and Experiment Design for Seismic Performance Evaluation of Ice and Water Contaminated Friction Pendulum Bearings
… This assessment may lead to modified analytical models to account for the effects of water and ice contamination, and recommendations to account for water and ice contamination in the design process and/or recommendations for mitigation. However, the scope of this thesis includes test setup and …
-
A “Human Endeavor”: Killing In Contemporary U.S. Combat Narratives
… dissertation aims to develop a 3-D numerical model of dam-break flows on movable beds. Three tasks are defined to accomplish the goal of this study. The first task is developing a 3-D hydrodynamic model to simulate dam-break flow on fixed beds with simple geometry and test the water surface …
-
Numerical Simulation of Saltwater Intrusion in Coastal Aquifers
The modeling of groundwater in costal aquifers is an important and difficult issue in water resources. The primary difficulty resides in efficient and accurate simulation of the movement of the saltwater front. This thesis is devoted to the sharp interface numerical study of one and two dimensional …
-
Διερεύνηση της μεθόδου των πεπερασμένων όγκων στην ελαστικότητα και στην επίλυση ροϊκών προβλημάτων για την προσομοίωση διεργασιών παραγωγής αεροναυπηγικών συνθέτων υλικών με μεθόδους αναρρόφησης και μεταφοράς ρητίνης
The finite volume method was developed in the early 70s as a numerical method for solving fluid mechanics problems mainly due to its capacity to handle easily the convective terms that appear in hyperbolic problems. Lately, researchers are trying to exploit the advantages of the method in other …
-
PCM Behavior in Finite Thickness Slabs Under a Step Response Heat Input
… resistance between the heat source and the PCM volume, but increases the total thermal resistance between the heat source and heat sink. In systems that operate in both steady-state and transient regimes, this introduces tradeoffs between cooling performance in these distinct regimes. Employing …
-
Effects of Spatial Variability on Bearing Capacity of Deep Soil Mixing Columns
… Monte Carlo simulations and the validated finite volume models, the research analyzes the mechanical response of DSM columns under axial loading. Results reveal that spatial variability in strength parameters reduces the peak bearing capacity of DSM columns by approximately 21%, with …
-
Thermal Modelling and Validation of Heat Profiles in an RF Plasma Micro-Thruster
… propulsion devices onto spacecraft such as volume constraints and heat dissipation limitations, a characterization of the heat generation and heat transfer properties of Pocket Rocket is necessary. Several heat-transfer models of Pocket Rocket were considered as a part of this analysis to …
-
Air gaps in protective clothing during flash fire exposure
… dependent thermophysical properties. A finite volume model was developed to simulate the transient heat transfer in a single layer protective clothing system with radiation heat transfer. The model was employed to investigate the influence of the conduction-radiation heat transfer …
-
Active Thermal Management in FRP Composites via Embedded Vascular Networks
… signs of thermal damage were both lessened. A finite volume model in MATLAB simulated the thermal performance of arbitrary vascular cooling networks. This was validated with good agreement to experimental specimen temperatures. This was then implemented into a basic genetic algorithm optimiser, …
-
Modeling of continuous casting mold powder behavior: heat transfer, combustion, sintering, and melting
A model of temperature distribution, carbon and gas concentrations, and powder and melt pool thickness evolution has been developed for the top-surface powder layers in the continuous-casting process. Mold powder is added to the continuous caster to provide thermal and chemical insulation (prevent …
-
Lagrangian Budgets for Ocean Kinematics
… consistent with the Eulerian constraints of the finite-volume model. We apply this framework to explore the dynamical mechanisms shaping upper-ocean temperature and salinity variability. The 2013–2016 Northeastern Pacific marine heatwave (MHW) is one of the most intense extratropical warming …
-
Evaluating Thermal Behavior and Use of Maturity Method in Mass Concrete
… analysis methodology was developed using finite volume method in which variable heat conductivity and capacity can be handled at early ages. MATLABRTM was then employed to generate a program that solves the governing heat transfer equation. Analysis results were validated with …
-
Solution of fully-coupled shallow water equations and contaminant transport using a primitive variable Riemann solver and a semi-discrete SUPG method
In the present dissertation, a finite volume and a finite element model are developed and tuned for the solution of the fully-coupled two-dimensional Shallow Water and Contaminant transport Equations with arbitrary bed topography and wetting-drying fronts. A Riemann-solver finite volume scheme, …
-
Flow and Temperature Fields Generated by a Thermally Activated Interventional Vascular Device
… approaches of exact analytical solutions and finite difference modeling combined with the experimental techniques of particle image velocimetry (PIV) and laser-induced fluorescence (LIF). The attained velocities and temperatures related to the convective heat transfer impact the potential for …
-
INVESTIGATION OF LONG TERM PILLAR STABILITY IN AN ABANDONED GYPSUM MINE BASED ON DISSOLUTION MODELS
… power law for flowing water. A simple analytical model was developed to predict the change of specimen’s diameter by time due to dissolution. A finite volume model was developed in FLAC3D to model the strength reduction of specimens due to both saturation and dissolution. The model was used to …
-
Numerical Modeling of Thermal/Saline Discharges in Coastal Waters
… mixing behavior of these jets is studied using a finite volume model (OpenFOAM). Various turbulence models have been applied in the numerical model to assess the accuracy of turbulence models in predicting the effluent discharges in submerged outfalls. Four Linear Eddy Viscosity Models (LEVMs) are …
-
Thermal Analysis of Engine Bay in Star-CCM+. Method Development and Correlation with Experimental Data.
… exhaust system. A CFD simulation is setup with a finite volume model of a car in a wind tunnel with a fully resolved engine bay, including the internal exhaust gas flow from the exhaust manifold downstream to the first sections of the exhaust pipe. The solids containing the exhaust gases are also …
Page 1 of 2