Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 20 for “"flame holding"”.

  1. An Experimental Study of Flame Holding

    In the present study the flame holding mechanism for lean methane- and lean propane-air flames is examined under conditions where the recirculation zone is absent.

    uiuc Repository record for An Experimental Study of Flame Holding (opens in a new tab)

  2. Coupling of Vortex Flows with Control Jets for Enhanced Mixing and Flame Holding in Supersonic Flows

    <p>This study presents results of innovative integration of passive and active flow physics to accomplish effective supersonic mixing. The study is continuing cavity flow control research in the supersonic wind tunnel at the University of Tennessee Space Institute (UTSI). Initially numerical …

    utk-theses Repository record for Coupling of Vortex Flows with Control Jets for Enhanced Mixing and Flame Holding in Supersonic Flows (opens in a new tab)

  3. Supersonic Combustion and Mixing Characteristics of Hydrocarbon Fuels in Screamjet Engines

    … swept step shows the ability to hold the propane flame in the supersonic air stream without extinction. It was found that the side sweeping of the combustor exhibits the high temperature and combustion products concentration in the far field domain while the area downstream of the normal injection …

    odu Repository record for Supersonic Combustion and Mixing Characteristics of Hydrocarbon Fuels in Screamjet Engines (opens in a new tab)

  4. Investigation of Liquid Methanol Combustion Inside a Scramjet Combustor

    … and combustion using a 2D-symmetric cavity flame-holding scramjet modeled after the HIFiRE-2 geometry flying at Mach 8. The current simulations are inspired by experimental combustion data obtained in testing on a similar geometry at CUBRC. Methanol is used as the liquid fuel due to its …

    alabama Repository record for Investigation of Liquid Methanol Combustion Inside a Scramjet Combustor (opens in a new tab)

  5. Investigation of Fuel Geometry and Solid Fuel Combustion for Solid Fuel Ramjets

    … to employ a novel fuel geometry to increase the flame-holding limits of an SFRJ. Two bench-scale solid fuel experiments were conducted to capture relevant performance metrics of five solid fuels. Performance parameters such as regression rates, surface temperature variations, molten layer …

    vt Repository record for Investigation of Fuel Geometry and Solid Fuel Combustion for Solid Fuel Ramjets (opens in a new tab)

  6. Flow visualization and experimental optimization of three inlet-side-dump liquid-fuel ramjet combustors

    … were utilized to qualitatively determine optimum flame-stabilization dome lengths and fuel-injection locations. The results were in good agreement with the results from previous studies. The optimum dome lengths which provided good fuel distribution and steady mixing all had lengths between 0.31 D …

    nps Repository record for Flow visualization and experimental optimization of three inlet-side-dump liquid-fuel ramjet combustors (opens in a new tab)

  7. Ignition of Supersonic Flows Via Pulse Detonator

    Cavity stabilized flames are one of the primary methods of flame holding being researched for use in supersonic combustion ramjets (scramjets). In order to hold a flame in the supersonic freestream using a cavity, the cavity itself must first be ignited and a stable flame formed within. A fueled …

    ucf Repository record for Ignition of Supersonic Flows Via Pulse Detonator (opens in a new tab)

  8. Flame stabilization by a plasma driven radical jet in a high speed flow

    … recirculating region behind bluff body flame holders, such as V-gutters. Blocking the high speed flow with bluff bodies causes a significant pressure drop, and heating the flame holder by the hot combustion product causes a thermal signature, which is a critical problem in a military …

    gatech Repository record for Flame stabilization by a plasma driven radical jet in a high speed flow (opens in a new tab)

  9. Operation Characteristics of a Plasma Torch for Supersonic Combustion Applications with Simulated Cracked JP-7 Feedstock

    … a program to examine the torch as an igniter and flame-holder for hydrocarbon-fueled scramjet engines. Previous research has shown that the plasma torch has promise as a robust igniter and flame-holder using gaseous fuels such as methane, ethylene and propylene when combined with an aeroramp to …

    vt Repository record for Operation Characteristics of a Plasma Torch for Supersonic Combustion Applications with Simulated Cracked JP-7 Feedstock (opens in a new tab)

  10. On recessed cavity flame-holders in supersonic cross-flows

    Flame-holding in a recessed cavity is investigated experimentally in a Mach 2.5 preheated cross-flow for both stable and unstable combustion, with a relatively low preheating. Self-sustained combustion is investigated for stagnation pressures and temperatures reaching 1.4 MPa and 750 K. In …

    gatech Repository record for On recessed cavity flame-holders in supersonic cross-flows (opens in a new tab)

  11. The effects of diamond injector angles on flow structures at various Mach numbers

    … performed to improve the understanding of the flame holding potential by extending the numerical database envelop to include different injector half angles and examine the flow at Mach 2 and Mach 5. The configuration of a diamond injector shape was found to reduce the flow separation upstream, …

    tamu Repository record for The effects of diamond injector angles on flow structures at various Mach numbers (opens in a new tab)

  12. Active control of spray combustion

    … Hz and blowing ratios between 6-15. Open-loop flame response to forcing has also been acquired by recording pressure and heat release spectra. The results show that the mean temperature field inside the flame can be altered due to jet modulation. Significant effects are observed by forcing at …

    lsu-thes Repository record for Active control of spray combustion (opens in a new tab)

  13. Rotational and Vibrational Raman Spectroscopy for Thermochemistry Measurements in Supersonic Flames

    … afterburners, and rocket exhausts. To study flame extinction under similar high Mach number conditions, we need access to thermochemistry measurements in supersonic environments. In the current work a two-stage miniaturized combustor has been designed that can produce open supersonic …

    tamu Repository record for Rotational and Vibrational Raman Spectroscopy for Thermochemistry Measurements in Supersonic Flames (opens in a new tab)

  14. Data-driven dimensionality reduction for simulating combustion systems

    … conditions relevant to supersonic combustion and flame holding in scramjet cavities. The generated skeletal mechanism is capable of simulating ignition with a computational speed-up of 84% and with ignition delay time errors below 10%. Next, a novel empirical manifold framework is presented with …

    cornell Repository record for Data-driven dimensionality reduction for simulating combustion systems (opens in a new tab)

  15. Microwave and laser plasma interactions in detonations and flames

    … been demonstrated to extend ignition limits and flame speeds in a variety of combustion environments. Its implementation addresses challenges such as stringent emission and efficiency requirements for power generation and propulsion, and flame holding and ignition in harsh flow environments …

    iastate Repository record for Microwave and laser plasma interactions in detonations and flames (opens in a new tab)

  16. Simulation of Flow in a Solid Fuel Ramjet Cavity

    … of the cavity, indicating that it enhances flame-holding in solid-fuel ramjets, in agreement with the experiments. The analysis of the ramjet acoustic modes shows the emergence of low frequency modes in the cavity cases, in agreement with the experiments. Using SPOD, these modes were …

    vt Repository record for Simulation of Flow in a Solid Fuel Ramjet Cavity (opens in a new tab)

  17. Novel laser ignition technique using dual-pulse pre-ionization

    … high vorticity leading to high rates of flame stretching. In this work, we are addressing some of the aforementioned disadvantages of laser ignition by developing a novel approach based on a dual-pulse pre-ionization scheme. The new technique works by decoupling the effect of the two …

    colostate Repository record for Novel laser ignition technique using dual-pulse pre-ionization (opens in a new tab)

  18. Multi-scale modeling of nanosecond plasma assisted combustion

    … to local plasma chemistry effects rather than flame propagation, and heat transport does not play a significant role. The nanosecond pulse discharge plasma excitation resulted in nearly simultaneous ignition over a large volume, in sharp contrast to hot-spot igniters. Next, the effect of …

    gatech Repository record for Multi-scale modeling of nanosecond plasma assisted combustion (opens in a new tab)

  19. Pyrolysis and Flamelet Model for Polymethyl Methacrylate in Solid Fuel Sc(ramjet) Combustors

    … of pressure and high oxidizer temperatures on flamelet dynamics. The focus is on modeling the flow field with accurate chemical heat release and residence time, to better study the effects of heat flux on the solid surface and the resulting coupling. An investigation of solid fuel scramjets was …

    vt Repository record for Pyrolysis and Flamelet Model for Polymethyl Methacrylate in Solid Fuel Sc(ramjet) Combustors (opens in a new tab)

  20. Experimental Study of High-Pressure Rotating Detonation Combustion in Rocket Environments

    … combustor behavior was generally dominated by flame holding instead of detonation. Injector erosion and instrumentation damage were also persistent challenges. Results from tests conducted with natural gas and methane were much more successful. Overall, several different types of detonation …

    purdue-thes Repository record for Experimental Study of High-Pressure Rotating Detonation Combustion in Rocket Environments (opens in a new tab)