Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 14 of 14 for “"flame surface density"”.

  1. Large-eddy Simulation of Premixed Turbulent Combustion Using Flame Surface Density Approach

    … chemical reactions are confined to propagating surfaces that are significantly thinner than the computational grids used in practical LES. In these situations, the chemical kinetics and its interaction with the turbulence are not resolved and must be entirely modelled. There is, therefore, a …

    toronto-retro Repository record for Large-eddy Simulation of Premixed Turbulent Combustion Using Flame Surface Density Approach (opens in a new tab)

  2. Flame Surface Density Measurements and Curvature Statistics for Turbulent Premixed Bunsen Flames

    … planar laser induced fluorescence (PLIF). Flame topography measurements in terms of flame surface density and curvature were calculated based on the flame front detected by the CH PLIF signal. The goal of this work was to investigate turbulent flames with extremely high turbulence intensity …

    vt Repository record for Flame Surface Density Measurements and Curvature Statistics for Turbulent Premixed Bunsen Flames (opens in a new tab)

  3. Evolution of reactive surfaces in turbulent flows

    The growth of reactive surfaces in turbulent flows is of intrinsic interest to turbulent premixed combustion modeling. In the regimes of turbulent combustion relevant to technological flows, the global fuel burning rate is directly proportional to the area of the propagating reactive front. This …

    texas Repository record for Evolution of reactive surfaces in turbulent flows (opens in a new tab)

  4. The effects of carbon dioxide addition on turbulent premixed combustion

    … into the fuel stream to emulate dry EGR. The flames were operated at a nearly constant Reynolds number, Lewis number, and adiabatic flame temperature to minimize thermal and transport effects. The differences observed among these flames were expected to reveal the chemical effects of CO2 …

    purdue-thes Repository record for The effects of carbon dioxide addition on turbulent premixed combustion (opens in a new tab)

  5. Experimental and numerical investigation of confined premixed flame

    Understanding the dynamics of premixed flames propagating during constant volume combustion is key to enhancing the performance of existing combustion devices, which provide 80% of the world’s energy supply, and reducing the impact of pollution on the environment. This work experimentally and …

    msu Repository record for Experimental and numerical investigation of confined premixed flame (opens in a new tab)

  6. Experimental Investigation of the Dynamics and Structure of Lean-premixed Turbulent Combustion

    Turbulent premixed propane/air and methane/air flames were studied using planar Rayleigh scattering and particle image velocimetry on a stabilized Bunsen type burner. The fuel-air equivalence ratio was varied from Φ=0.7 to 1.0 for propane flames, and from Φ=0.6 to 1.0 for methane flames. The …

    toronto-retro Repository record for Experimental Investigation of the Dynamics and Structure of Lean-premixed Turbulent Combustion (opens in a new tab)

  7. Experimental and Numerical Investigation of Flame Acceleration in an Obstructed Channel

    … is to experimentally and numerically investigate flame acceleration in an obstructed channel. The motivation for this research is for the development of Pulse Detonation Engines (PDEs), which are unsteady propulsion devices that utilize the detonative mode of combustion. A literature survey on …

    queens Repository record for Experimental and Numerical Investigation of Flame Acceleration in an Obstructed Channel (opens in a new tab)

  8. Equivalence Ratio Gradient Effects on Local Flame Front Topology and Heat Release Rate in Stratified, Iso-Octane/Air Turbulent V-Flames

    … premixing on the local behaviour of turbulent flames were investigated using a novel rectangular slot burner that could generate controlled, transverse variations in mixture strength along its exit plane. Turbulent, iso-octane/air V-flames were anchored in reactant mixtures of varying mean …

    carleton Repository record for Equivalence Ratio Gradient Effects on Local Flame Front Topology and Heat Release Rate in Stratified, Iso-Octane/Air Turbulent V-Flames (opens in a new tab)

  9. Subfilter Scale Modelling for Large Eddy Simulation of Lean Hydrogen-enriched Turbulent Premixed Combustion

    … were pursued: the artificially thickened flame model with a power-law SFS wrinkling approach and the presumed conditional moment (PCM) coupled with the flame prolongation of intrinsic low-dimensional manifold (FPI) chemistry tabulation technique. Freely propagating and Bunsen-type flames …

    toronto-retro Repository record for Subfilter Scale Modelling for Large Eddy Simulation of Lean Hydrogen-enriched Turbulent Premixed Combustion (opens in a new tab)

  10. Subfilter Scale Combustion Modelling for Large Eddy Simulation of Turbulent Premixed Flames

    … In particular, for turbulent premixed flames, a considerable complication of LES is that the flame thickness is generally much smaller than the LES filter width such that the flame front and chemical reactions cannot be resolved on the grid. Accurate and robust subfilter-scale (SFS) …

    toronto-retro Repository record for Subfilter Scale Combustion Modelling for Large Eddy Simulation of Turbulent Premixed Flames (opens in a new tab)

  11. Development of a 3D Laser Imaging System and its Application in Studies of Turbulent Flame Structure

    … spark ignition (SI) engines, the turbulence/flame interaction is of particular relevance as it not only determines the maximum possible burning rate in such an engine, but also if flames are likely to extinguish (quench). The present study describes a three-dimensional laser imaging technique …

    whiterose Download PDF for Development of a 3D Laser Imaging System and its Application in Studies of Turbulent Flame Structure (opens in a new tab)

  12. Experimental Investigation of Premixed Turbulent Hydrocarbon/Air Bunsen Flames

    … of turbulence, the front of a premixed turbulent flame is subjected to the motions of eddies that leads to an increase in the flame surface area, and the term flame wrinkling is commonly used to describe it. If it is assumed that the flame front would continue to burn locally unaffected by the …

    toronto-retro Repository record for Experimental Investigation of Premixed Turbulent Hydrocarbon/Air Bunsen Flames (opens in a new tab)

  13. Fundamental studies of flame propagation in lean-burn natural gas engines

    … characteristic time required for steady premixed flame propagation has three components: time for autoignition to occur, time for peak temperature to be achieved following autoignition, and time for steady flame propagation in the premixed fuel/air mixture to be achieved. The autoignition time …

    purdue-thes Repository record for Fundamental studies of flame propagation in lean-burn natural gas engines (opens in a new tab)

  14. Kinematic Study of the Evolution and Properties of Flame Surfaces in Turbulent Nonpremixed Combustion with Local Extinction and Reignition

    … of the stoichiometric mixture fraction isosurface (i.e., the flame surface). The configuration, area and the behavior of the flame surface can quantitatively describe the interaction of the flame with turbulent flow and thus the flame surface kinematics has a strong influence on the …

    washington Repository record for Kinematic Study of the Evolution and Properties of Flame Surfaces in Turbulent Nonpremixed Combustion with Local Extinction and Reignition (opens in a new tab)