Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 191 for “"flame temperature"”.
-
NO, Burnout, Flame Temperature, Emissivity, and Radiation Intensity from Oxycombustion Flames
… for performance while burning coal related to flame stability, NO, and burnout using a burner supplied by Air Liquide. Parameters investigated included oxygen (O2) injection location, burner swirl number and secondary carbon dioxide (CO2) flow rate. The data showed swirl can be used to …
-
Flame Temperature Imaging of a Low NOx Burner via Laser Rayleigh Scattering
… low emission burners for use in water heaters. Flame temperature is strongly correlated to NOx production. Hence, characterizing flame temperatures in new burners is a key part of improving upon burners used today and the development of future burners. Temperature measurements applied to a new, …
-
Burnout, NO, Flame Temperature, and Radiant Intensity from Oxygen-Enriched Combustion of a Hardwood Biomass
… and medium grind 500 µm mass mean diameter). Flame images were obtained with a calibrated RGB digital camera allowing a calculation of visible radiative heat flux. Ash samples and exhaust NO were collected for a matrix of operating conditions with varying injection strategies. The results …
-
THE EFFECTS OF FLAME TEMPERATURE, PARTICLE SIZE AND EUROPIUM DOPING CONCENTRATION ON THE PROPERTIES OF Y2O3:EU PARTICLES FORMED IN A FLAME AEROSOL PROCESS
… are phosphors that have found wide applications. Flamesynthesized Y2O3:Eu particles may have either the cubic or the monoclinic structure. The effects of particle size and Eu doping concentration on crystal structure and the surface elemental composition of the flame-synthesized Y2O3:Eu particles …
-
Evaluation of the Benefits of Oxy-combustion on Emissions from a Compression Ignition Engine
… engine loads. NOx emissions correlated with flame temperature for both N-EGR and O-EGR but were slightly lower at a given flame temperature for O-EGR. Flame temperature reduction for N-EGR was primarily through dilution of the available oxygen while for O-EGR both the increase of specific …
-
The use of chemiluminescence for the detection of temperature and fuel-to-air ratio in turbulent premixed flames
A fast response method for the determination of temperature and equivalence ratio has been developed for turbulent premixed flames. This method utilizes chemiluminescent signals to make correlations with flame temperature and equivalence ratio. Emissions from two radical groups are used for the …
-
Structure and extinction of spherical diffusion flames in microgravity
Spherical diffusion flames in microgravity were studied both numerically and experimentally. The flames are supported on a porous spherical burner which Issues a constant flowrate into a quiescent atmosphere. Experiments were performed in the NASA Glenn 2.2 sand 5.2 s drop facilities. The …
-
Effects of Temperature and Fuel Dilution on Soot Yields in an Inverted Gravity Flame Reactor
Inverted laminar co-flow diffusion flames varied by dilution and preheat are characterized by temperature and soot emission measurements. Flame conditions vary by fuel structure (ethane, ethylene, methane), fuel dilution with Ar (0-90%), and preheat of reagents. The measured maximum flame …
-
Investigation on weakly curved counterflow diffusion flames at infinitely fast chemistry
… the behavior of a counterflow diffusion flame subject to a flow field comprising of a first order potential flow superimposed on a weak second order correction to the potential flow. An Arrhenius one-step irreversible reaction model at infinite Damkohler number and constant density is …
-
Experimental and Numerical Investigation of Residential Furnace Performance with Blends of Natural Gas and Green Hydrogen
… of hydrogen and natural gas. The results reveal flame temperature, wall temperature, heat flux, average air flow temperature, heat transfer, combustion efficiency, and emission gas analysis for furnaces operating under 15% blends of hydrogen and natural gas. Experimental results indicate that …
-
SIZE MODIFICATION AND COATING OF TITANIUM DIOXIDE USING A PREMIXED HYDROGEN/AIR FLAME
A study was conducted of the effect of flame processing on the size distribution of titania nanoparticles, and a flame process was developed for producing TiO<sub>2</sub>/SiO<sub>2</sub> coreshell particles from aqueous suspensions of TiO<sub>2</sub> and SiO<sub>2</sub> nanoparticles. Both were …
-
An Interactive Chemical Equilibrium Solver for the Personal Computer
… will then calculate equilibrium composition, flame temperature, and other thermodynamic properties for many common cases. Examples in this thesis show VTEC's ability to predict chemical equilibrium compositions and flame temperature for selected reactions, and demonstrate how VTEC can …
-
Application of Two-Color Pyrometry to Characterize the Two-Dimensional Temperature and Emissivity of Pulverized-Coal Oxy-Flames
… that enables carbon dioxide (CO2) capture. Flame temperature and emissivity data were taken on a 150 kWth, pulverized-coal, burner flow reactor (BFR) that has been modified to run oxy-combustion with pure CO2 as simulated recycled flue gas. Data were taken at 78 conditions in which three …
-
Experimental investigation of flame structure of CO2-diluted syngas and biogas mixtures by laser diagnostics
… is to experimentally investigate the laminar flame structure of syngas and biogas mixtures through Raman laser spectroscopy. The gaseous fuel mixtures have been predetermined by an industrial partner and are composed of varying concentrations of H2, CO and CH4 with CO2 dilution. The laminar …
-
Combustion properties of MgO for UVA emission
… formulations. Results showed that the high temperature emission of magnesium oxide was the key ingredient for enhancing UVA emission. Thermal equilibrium chemical modeling using REAL code software shows that the flame temperature needs to be greater than 2369 K for MgO emission to be …
-
Transient model of preheating a submerged entry nozzle
… axisymmetric computational model of the flame, combustion reactions, and air entrainment has been combined with a transient model of heat transfer in the refractory walls to simulate the SEN preheating process. The model predictions match with experimental measurements of preheating with …
-
Development of Color Ratio Thin Filament Pyrometry Approach for Applications in High Speed Flames
… pyrometry is a proven technique used to measure flame temperature by capturing the spectral radiance produced by the immersion of silicon carbide filaments in a hot gas environment. In this study a commercially available CMOS color camera was used, and the spectral response of each color channel …
-
Temperature determination of the hydroxyl radical
… method for investigating the spectra of gases in flames. The spectra obtained is highly dependent upon the wavelength of the exciting laser line, the pressure and temperature of the flame, and the molecular species in the flame. Such spectra may be compared to theoretical predictions of the …
-
Investigation on Nitric Oxide and Soot of Biodiesel and Conventional Diesel using a Medium Duty Diesel Engine
… fuel. In general, NOx formation is dominated by flame temperature. Interestingly, soot can play a role as a heat sink as well as a heat transfer media to high temperature gases. Thus, the cooling effect of soot may change the flame temperature and therefore, NOx emissions. In this study, emphasis …
Page 1 of 10