Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 15 of 15 for “"flame transfer function"”.
-
Empirical study of acoustic instability in premixed flames: measurements of flame transfer function
… the acoustic instability problem at the flame level. The goal is an experimental determination of the flame transfer function and comparison of the experimental data with a theoretical model of the flame. An experimental procedure is designed to diagnose the origins of the combustion …
-
Thermoacoustic Analysis and Experimental Validation of Statistically-Based Flame Transfer Function Extracted from Computational Fluid Dynamics
… the coupling of unsteady heat release from the flame and the acoustic field. One potential driving mechanism for these instabilities arise when velocity fluctuations (u') at the fuel injection location causes perturbations in the local equivalence ratio and is convected to the flame location …
-
Spatially Resolved Analysis of Flame Dynamics for the Prediction of Thermoacoustic Combustion Instabilities
… lean premixed combustion, which results in lower flame temperatures and therefore the possibility of significantly reduced nitric oxide emissions. While lean premixed combustion offers reduced environmental impacts, it has been observed to experience increased possibility of the occurrence of …
-
Premixed flame kinematics in a harmonically oscillating velocity field
… quantifying and predicting mechanisms of flame response subject to disturbances. A promising tool for predicting combustion instability is a flame transfer function. The flame transfer function is obtained by integrating unsteady heat release over the combustor domain. Thus, the better …
-
A low-order thermo-electro-acoustic framework for thrust maximization in miniature pulse combustors
… cascade with a compact Crocco \(n\)--\(\tau\) flame transfer function placed at the chamber--throat junction. The passive network predicts the geometry and sound-speed-dependent acoustic branches, while the flame model provides an active feedback closure with gain, bandwidth, and delay …
-
Effect of fuel composition on the response of an acoustically forced flat flame
… was undertaken. An acoustically forced flat flame burner was constructed, allowing measurement of the flame transfer function (FTF) relating acoustic perturbations to heat release rate fluctuations in the flame. Tests were done using methane, along with simulated syngas and biogas fuel …
-
Mathematical Modeling and Numerical Approximations of Combustion Instability Frequencies and Growth Rates
… is applicable to a two-duct system with a thin flame between the two ducts, each of which having constant area and properties, considers the case of axial mean velocity and uses a vibrating wall at the inlet to select the frequency so that all modes may be found. The model is applied to the …
-
Characterization of nonlinear heat release-acoustic interactions in gas turbine combustors
… describes an experimental investigation of the flame transfer function between flow disturbances and heat release oscillations in lean, premixed combustors. This research effort was motivated by the fact that modern gas turbines, operating fuel-lean to minimize exhaust emissions, are susceptible …
-
Response mechanisms of attached premixed flames to harmonic forcing
… oscillations cause the heat release rate of the flame to oscillate, which can engage one or more acoustic modes of the combustor or gas turbine components, and under certain conditions, lead to limit cycle oscillations. This phenomenon, called thermoacoustic instabilities, is characterized by …
-
Linear combustion stabiliy analysis of oxidizer-rich staged combustion engines
… perturbations is quantified by means of a Flame Transfer Function (FTF). Spatially distributed fields for both the FTF gain and phase are computed from LES data using POD reduction for three different injector recess lengths. A chamber-level response field is constructed as a superposition …
-
Fuel Flexibility, Gas Turbine Combustion, Laser Diagnostics, Lean Blow-Out
… high speed imaging is utilized to analyze flame shape and stabilization. The flow recirculation zone, which aids in flame stabilization, is analyzed using a power spectral density (PSD) approach to assess relative strength of the recirculation zone. From the PSD analysis conducted, results …
-
Phase Shift Control: Application and Performance Limitations With Respect to Thermoacoustic Instabilities
… in density of the combustion reactants at the flame location. Additionally, the system model is coupled with a model of the control loop and then validated by comparison of simulated results to experimental results using nearly identical controllers.
-
A Study of the Dynamics of Laminar and Turbulent Fully and Partially Premixed Flames
… order models for the dynamics of laminar flat flames, swirl stabilized turbulent flames, and in evaluating the effects of the variation in fuel composition on flame dynamics. The laminar flat flame study was conducted on instrument grade methane, propane, and ethane flames for four total flow …
-
An Experimental Characterization of a Multi-Element Lean Premixed Pre-Vaporized Combustor for Supersonic Transport Applications
… designs that involve multiple different flames or flow devices. The interactions of such combustor elements can lead to individual behaviours that differ from that of single elements. The existing literature on flame and flow interactions is focused on conditions relevant to the operation …
-
Dynamics of Harmonically Forced Nonpremixed Flames
… release, of harmonically excited non-premixed flames. Analytical, numerical, computational, and, experimental analyses were performed, along with combined analyses methods, to study excitation and evolution of wrinkles on the flame front. Explicit expressions for the dynamics were developed. …