Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 43 for “"flat flame burner"”.

  1. Fundamental studies of solid-fuel combustion using a two-stage flat-flame burner

    … many aspects of coal combustion, including flame stability, submicron aerosol evolution, and char burnout. As important as ignition and these associated processes are, they are challenging to study because they depend on many factors, such as the combustion environment, particle size, and …

    wustl Repository record for Fundamental studies of solid-fuel combustion using a two-stage flat-flame burner (opens in a new tab)

  2. Optical measurements of nano-aluminum combustion in a heterogeneous shock tube and in a flat flame burner

    … in the hot ambient gases of a one dimensional flat flame burner. Three different particle sized were studied (50, 80, and 110 nm). The burntimes of each were measured using high speed CMOS imaging allowing for a comparison of burntimes in various types of environments. The results found OH …

    uiuc Repository record for Optical measurements of nano-aluminum combustion in a heterogeneous shock tube and in a flat flame burner (opens in a new tab)

  3. Effects of Pressure on Coal Pyrolysis at High Heating Rates and Char Combustion

    … coal/char high pressure combustion models. A flat-flame burner was used in a high pressure laminar flow facility to conduct high temperature, high heating rate pyrolysis and combustion experiments for four coals. The high-heating-rate (10000 K/s), high-temperature atmosphere can better …

    byu Repository record for Effects of Pressure on Coal Pyrolysis at High Heating Rates and Char Combustion (opens in a new tab) Download PDF for Effects of Pressure on Coal Pyrolysis at High Heating Rates and Char Combustion (opens in a new tab)

  4. Sawdust Pyrolysis and Petroleum Coke CO2 Gasification at High Heating Rates

    … with biomass (sawdust) in BYU's atmospheric flat-flame burner reactor at conditions ranging from 1163 to 1433 K with particle residence times ranging from 23 to 102 ms. Volatile yields and mass release of the sawdust were measured. The measured pyrolysis yields of sawdust are believed to be …

    byu Repository record for Sawdust Pyrolysis and Petroleum Coke CO2 Gasification at High Heating Rates (opens in a new tab) Download PDF for Sawdust Pyrolysis and Petroleum Coke CO2 Gasification at High Heating Rates (opens in a new tab)

  5. Experimental and Kinetic Modelling Study of Jet A-1/Ethanol Blend Combustion and Oxidation Stability

    … kinetic model for simulating jet A-1/ethanol flames and the experimental validation. The chemical structure of the jet A-1/ethanol flames and two jet fuel surrogates at three stoichiometries in a premixed flat flame-burner have been measured by employing a thermocouple, OH, NO PLIF …

    whiterose Download PDF for Experimental and Kinetic Modelling Study of Jet A-1/Ethanol Blend Combustion and Oxidation Stability (opens in a new tab)

  6. Electrical impedance of methane flat flame

    … if electrical impedance measurements of the flame are a direct indication of fuel/air ratio. Previous worked measured electrical resistance of the combustion of gases in an atmospheric combustor. From this work, it was conjectured that the complex impedance might provide more information …

    wvu Repository record for Electrical impedance of methane flat flame (opens in a new tab)

  7. High resolution tunable diode laser spectroscopy of carbon monoxide in gas mixtures and flames

    … have been made in the combustion gases of a flat flame burner operating at temperatures in the range 1,800 to 1,900 K using tunable diode laser spectroscopic data.</p>

    utk-theses Repository record for High resolution tunable diode laser spectroscopy of carbon monoxide in gas mixtures and flames (opens in a new tab)

  8. Novel diode laser absorption techniques for combustion diagnostics

    … profiles in reacting environments, such as flames. The generally non-intrusive nature and spatial resolution of these techniques are now preferred over on extractive sampling, followed by analysis using techniques such as gas chromatography. In this thesis two laser absorption measurement …

    strathclyde Repository record for Novel diode laser absorption techniques for combustion diagnostics (opens in a new tab)

  9. Effects of Moisture on Combustion of Live Wildland Forest Fuels

    … differences, an experiment was designed to use a flat-flame burner to simulate a moving fire front which heated and ignited a stationary, individual fuel sample. Samples included various U.S. species from the California chaparral, the intermountain west, and the southeastern regions. Temperature, …

    byu Repository record for Effects of Moisture on Combustion of Live Wildland Forest Fuels (opens in a new tab) Download PDF for Effects of Moisture on Combustion of Live Wildland Forest Fuels (opens in a new tab)

  10. Effect of fuel composition on the response of an acoustically forced flat flame

    … dynamics was undertaken. An acoustically forced flat flame burner was constructed, allowing measurement of the flame transfer function (FTF) relating acoustic perturbations to heat release rate fluctuations in the flame. Tests were done using methane, along with simulated syngas and biogas fuel …

    carleton Repository record for Effect of fuel composition on the response of an acoustically forced flat flame (opens in a new tab)

  11. Modeling the combustion of light alcohols in spark-ignition engines

    … measurements on two different setups: a flat flame burner at Lund University (Sweden) and a fan-stirred combustion vessel at Leeds University (UK). One of the main advantages of light alcohols compared to gasoline is their elevated resistance to engine knock. To enable computational …

    ghent Repository record for Modeling the combustion of light alcohols in spark-ignition engines (opens in a new tab)

  12. Application of Fuel Element Combustion Properties to a Semi-Empirical Flame Propagation Model for Live Wildland Utah Shrubs

    … bush combustion model, a laminar flow flat-flame burner was used to provide a convection heating source to ignite individual live fuel samples. In this research project, four Utah species were studied: Gambel oak (Quercus gambelii), canyon maple (Acer grandidentatum), big sagebrush …

    byu Repository record for Application of Fuel Element Combustion Properties to a Semi-Empirical Flame Propagation Model for Live Wildland Utah Shrubs (opens in a new tab) Download PDF for Application of Fuel Element Combustion Properties to a Semi-Empirical Flame Propagation Model for Live Wildland Utah Shrubs (opens in a new tab)

  13. An investigation into the origin, measurement and application of chemiluminescent light emissions from premixed flames

    … is a semi-empirical model for a Bunsen type flame. The second is a 1-D model for a ceramic honeycomb flat-flame burner using the full chemical kinetics description of the conversion from fuel to products along with a detailed energy equation, accounting for the radiation energy exchange …

    vt Repository record for An investigation into the origin, measurement and application of chemiluminescent light emissions from premixed flames (opens in a new tab)

  14. Development of Color Ratio Thin Filament Pyrometry Approach for Applications in High Speed Flames

    … pyrometry is a proven technique used to measure flame temperature by capturing the spectral radiance produced by the immersion of silicon carbide filaments in a hot gas environment. In this study a commercially available CMOS color camera was used, and the spectral response of each color channel …

    vt Repository record for Development of Color Ratio Thin Filament Pyrometry Approach for Applications in High Speed Flames (opens in a new tab)

  15. A Method for Measuring Spatially Varying Equivalence Ratios with Application to Thermoacoustics

    Computed tomography for flame chemiluminescence emissions allows for 3D spatially resolved flame measurements to be acquired using a series of discrete viewing angle camera images. To determine fuel/air ratios, the ratio of excited radical species (OH*/CH*) emissions using chemiluminescence can be …

    vt Repository record for A Method for Measuring Spatially Varying Equivalence Ratios with Application to Thermoacoustics (opens in a new tab)

  16. Methodology For Validating Multi-Dimensional Engine Combustion Models And Fuel Surrogates Using An Optically Accessible Compression Ignition Engine

    … of the natural soot luminosity on a McKenna Flat Flame Burner. Spectral and Coherent anti-Stokes Raman Spectroscopy (CARS) measurements are used to propose a value of α in the soot emissivity model.

    wayne-thes Repository record for Methodology For Validating Multi-Dimensional Engine Combustion Models And Fuel Surrogates Using An Optically Accessible Compression Ignition Engine (opens in a new tab)

  17. Laminar flame speed of lithium ion battery gas

    … data exist for the adiabatic laminar flame speed (LFS) of BVG, especially for mixtures containing both permanent gases and vaporized electrolyte solvents. In this work, an experimental system is developed to measure laminar flame speeds using a McKenna flat flame burner with the heat …

    texas Repository record for Laminar flame speed of lithium ion battery gas (opens in a new tab)

Page 1 of 3